Flat Panel Television User Manual

TROUBLE SHOOTING TIPS

NNoo PPoowweerr

NNoo PPiiccttuurree

NNoo SSoouunndd

NNoo AAVV SSiiggnnaall

SS--VVHHSS CCoolloorr BBeeccoommeess FFaaiinntt

TTVV OOnnllyy PPrroodduucceess MMOONNOO

SSoouunndd

• Check the TV power cord. Unplug the TV, wait 10 seconds,

then reinsert the plug into the outlet and push the POWER

button again.

• Check that the outlet is not on a wall switch.

• Be sure the fuse is not blown on the AC power strip, if one

is being used.

• Check antenna/cable connections. Are they properly secured

to the TV’s ANT75Ω plug?

• Try running the Auto Program feature to find all available

channels.

• Press the AV button on the remote to make sure the correct

signal source is selected.

• If using an accessory device, be sure that it i functioning properly.

• If in PC Mode, a video signal MUST BE present or the TV will

turn off.

• Check the VOLUME buttons.

• Check the MUTE button on the remote control.

• If you’re attempting to hook up auxiliary equipment, check

the audio jack connections.

• Check whether AV and S-Video sockets connected simulta-

neously. If they are, disconnect the S-Video socket. AV signal

automatically overrides the S-Video signal if both sockets are

connected simultaneously.

• Unplug socket for S-Video connection. Reconnect the S-

Video socket of the TV carefully to the VCR socket.

• If using a cable box with RF only type connections, the signal

coming from the cable box will be produced in MONO only.

• Check Sound control setting. Change setting to Stereo.

065001056930 42 PLASMA CTV100 14/7/06 8:11 Page 72