Installation Guide

Driver Ordering, Electrical and Technical Data (Subject to change without notice)
Lamp Input Min.
No. of Input Starting Driver Catalog Power Starting
Lamps Volts Method Family Number (W) 120V 277V Temp (F/C)
1 120-277V (+/-10%) Instant Start Centium ICN-2P24-TLED-SC 25W 0.20A 0.09A 0ºF/-18ºC
2 120-277V (+/-10%) Instant Start Centium ICN-2P24-TLED-SC 48W 0.40A 0.17A 0ºF/-18ºC
3 120-277V (+/-10%) Instant Start Centium ICN-4P24-TLED-SC 69W 0.61A 0.27A 0ºF/-18ºC
4 120-277V (+/-10%) Instant Start Centium ICN-4P24-TLED-SC 93W 0.82A 0.36A 0ºF/-18ºC
Quick Installation Guide
Philips LED T8 System with Optifuse Technology
Please take the time to read this quick installation guide. The guide contains important
information and notes regarding the installation and operation of Philips LED T8
System with Optifuse Technology.
Instructions
• Philips LED T8 System with Optifuse Technology are suitable to replace either
T8 fluorescent lamps in fixtures containing standard non-shunted G13
(medium bi-pin) sockets.
During retrofit, rewiring is a MUST, please follow the installation steps
on the back page.
Lamps Ordering, Electrical and Technical Data (Subject to change without notice)
Color Rated
Product Ordering Nom. Bulb MOL Initial Temp. Pkg. Avg. Life
Number Code Watts Volts Type
(in.) Lumens
1
Base CRI (K) Qty (Hrs.)
2
42719-5 22T8/EXT/48-3500K UNV 22.5 100-277 T8 48" 2500 G13 85 3500K 10 50,000
42720-3 22T8/EXT/48-4000K UNV 22.5 100-277 T8 48" 2500 G13 85 4000K 10 50,000
42721-1 22T8/EXT/48-6500K UNV 22.5 100-277 T8 48" 2500 G13 85 6500K 10 50,000
1) Photometric testing consistent with IES LM-79.
2) Tested to B50 L70 requirement.
Line Current (Amps)
Line Current (Amps)