-,.%'/,012)301#0)43(/15641.
7899!:!;'<)<1=)>1/!?@)=)A*!B=/C,-'<)C*!D6E6 $OO ULJKWV UHVHUYHG 6SHFLÀFDWLRQV DUH VXEMHFW WR FKDQJH ZLWKRXW <',)C/6!F-+./0+-1*!+-/!,@/!A-'A/-,G!'2!;'<)<1=)>1/!?@)=)A*!B=/C,-'<)C*! 1 9 RU WKHLU UHVSHFWLYH RZQHUV 3KLOLSV UHVHUYHV WKH ULJKW WR FKDQJH SURGXFWV DW DQ\ WLPH ZLWKRXW EHLQJ REOLJHG WR DGMXVW HDUOLHU VXSSOLHV +CC'-.
Contents 1 1.1 1.2 1.3 1.4 1.5 To begin 4 TV tour 4 Setting up 8 Keys on the TV 14 Register your TV 16 Help and support 17 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 Use your TV 18 Remote control 18 Menus 21 Watch TV 23 Watch 3D 27 Watch satellite 28 Watch a connected device 30 Subtitles and languages 31 3 3.1 3.2 3.3 3.4 3.5 3.6 More TV 32 Net TV 32 Interactive TV 34 Text 35 Videos, photos and music Games 39 Locks and timers 40 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.
1 To begin 1.1 TV tour The remote control To open or close the FIND menu ¬. Open the Find menu to open the list of channels while you are watching TV channels or the list of videos and music while you browse your PC on TV. To adjust the volume. To open or close the ADJUST menu t Open the Adjust menu to quickly adjust the picture and sound settings. To switch TV channels. You can set the Smart picture setting to Game, which is ideal for gaming, or change the Smart sound setting of the TV loudspeakers.
Back È. Yellow With Back, you can go back to the previous TV channel or go one step back in a menu. With the yellow key, you can select the yellow option. Red With the red key, you can select the red option or open digital Interactive TV or some TV demonstration clips. Blue With the blue key, you can select the blue option. Read more about the remote control in Help > Use your TV > Remote control > Overview. Or go to the ¬ Search page in this Help to look for any topic.
Read more about Add your devices in Help > Use your TV > Menus > h Home. Read more about using EasyLink in Help > Use your TV > Remote control > Operate devices. In the chapter Help > Connections, drawings like these will help you to connect most common devices. High Definition TV This TV can display High Definition programmes, but to enjoy HD TV you need to get programmes in HD first. If you are not watching HD programmes, the picture quality will be that of a normal TV. Watch HD TV programmes from . . .
Wireless home network Simply link up this TV to your wireless home network. There is no need for a network cable. Enjoy your videos, photos and music files from your PC on your TV screen. Read more about Network in Help > Setup > Network. Next to the DVB-T and DVB-C reception, this TV has a built-in satellite DVB-S/S2 receiver. You can connect a satellite dish antenna and receive digital satellite channels . Read more about Satellite Channels in Help > Setup > Satellite channels .
1.2 Setting up Stand or wall mounting The 2-in-1 stand that comes with the TV, can be used as a tabletop stand or as a wall mount bracket. Instructions to mount the 2in-1 stand are also included in the printed Start guide. Read the instructions on the following pages. Unscrew the bolt in the middle of the bar with the supplied hex key. Caution Wall mounting the TV requires special skills and should only be performed by qualified personnel.
Turn the bar as shown. Reposition the bar on the stand and fix the bolt with the hex key. Fix the stand to the TV.
The TV is mounted at the correct height if your eyes are level with the centre of the screen when you sit down. Distance between the 2 fixing points . . . - 81cm/32" = 260mm - 102cm/40" = 300mm - 117cm/46" = 340mm Fix the 2 mounting discs. Use screws with a diameter of max 6mm.
Slide the bottom plate of the stand onto the mounting discs. To level the TV, pull the bottom of the TV towards you slightly and let it slide on the discs. Unscrew the bolt and turn the bar in the position shown. VESA info Your TV is prepared for a VESA-compliant wall mount bracket (not included). VESA codes to purchase the bracket: - 40PFL9715 : VESA MIS-F 200, 300, M6 - 46PFL9715 : VESA MIS-F 300, 300, M6 Use a screw length as shown in the drawing.
• Never expose the TV, remote control or batteries to excessive heat. Never place them near burning candles, naked flames or other heat sources, including direct sunlight. • Never insert objects into the ventilation slots or other openings on the TV. • Never place heavy objects on the power cord. • Avoid force coming onto power plugs. Loose power cause arcing or fire. Ensure that no strain is exerted on power cord when you swivel the TV screen.
Care • Never touch, push, rub or strike the screen with any object. • Unplug the TV before cleaning. • Clean the TV and frame with a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV. • To avoid deformations and colour fading, wipe off water drops as quickly as possible. • Avoid stationary images as much as possible. Stationary images are images that remain onscreen for extended periods of time.
1.3 Keys on the TV Power switch Switch the TV on or off with the power switch at the right-hand side of the TV. When switched off, the TV does not consume any energy. Press J Ambilight, to switch Ambilight on or off. While the TV is on standby, you can switch Ambilight on and create an Ambilight LoungeLight effect in your room. Read more about LoungeLight in Help > Use your TV > Use Ambilight > LoungeLight If the red indicator light is off, switch on the TV with the power switch.
To begin / Keys on the TV 15
1.4 Register your TV Congratulations on your purchase and welcome to Philips. Register your TV and enjoy a range of benefits including full support (including downloads), privileged access to information about new products, exclusive offers and discounts, the chance to win prizes and even participate in special surveys about new releases. Go to www.philips.
1.5 Help and support Using Help and Search Help You can open Help from the Home menu. In most cases, you can also press the yellow key on your remote control to open or close Help directly. For some activities, like Text, the colour keys have specific functions and cannot open Help. Before you follow the Help instructions, close Help. Press the yellow key or press h to close Help. When you press the yellow key again, Help will open on the page where you closed it.
2 Use your TV 2.1 Remote control Overview 8 CH- / Previous X To switch to the previous channel, page or chapter. 9 Source Ú To switch directly to a TV connection. 10 Options r To open or close the Options menu. 1 Standby O To switch the TV on or back to standby. 2 Home h To open or close the Home menu. 3 Navigation key To navigate up, down, left or right. 4 OK key To activate a selection. 11 Back È To go back to the previous channel. To exit a menu without changing a setting.
In general, these keys open the following device menus: 1 Home menu 2 Setup menu 3 Disc menu (disc content) 4 Pop -up menu 5 Options menu 6 Programme guide 7 Media selection One Touch Play Insert a disc into an EasyLink HDMI -CEC device and press Play on the device. The TV switches on from standby and starts playing the disc. 18 Number keys and text keypad To select a TV channel directly or to enter text. 19 Subtitle To switch Subtitles on or off. 20 Text / Info To open or close text.
To replace the batteries of the remote control, slide open the small tray at the bottom of the remote control. Use 2 coinshaped batteries (Type CR2032 – 3V). Make sure the + side of the batteries (top side) point upwards. The small tray has a + indicator. Remove the batteries if you are not using the remote control for a long time. Dispose of batteries according to the end of use directives. Read Help > To begin > Setting up > End of use.
2.2 Menus h Home In the Home menu, you start watching TV or start watching a movie disc or any other TV activity. Press h to open the Home menu . To start an activity, select it with the navigation keys and press OK. To close the Home menu, press h again. 3 Press OK to confirm the position. All devices and activities shift to the right. You can highlight another device or activity and reposition it. To stop Reorder, press rOPTIONS and select Exit reorder.
Ambilight Read more about the Ambilight settings in Help > Setup > Ambilight. Picture format Read more about the Picture format settings in Help > Use your TV > Watch TV > Picture format. Smart picture, Smart sound You can set the TV to the pre-defined setting that best suits what you're watching. Read more about Smart settings in Help > Use your TV > Watch TV > Smart settings. Speakers To hear the sound through the TV speakers, close Help, press tADJUST, select Speakers and select TV.
2.3 Watch TV Channel list Switch channels In the Channel list, you can look up all installed TV and radio channels. To watch TV and switch channels, make sure the Watch TV option is selected in the Home menu. To watch TV, press h , select Watch TV and press OK. While watching TV, press ¬FIND to open the Channel list. Press ¬FIND again or È (Back) to close the Channel list without changing the channel.
Rename You can rename a channel in the Channel list. 1 In the channel list, highlight the channel you want to rename. 2 Press rOPTIONS and select Rename to start renaming. You can enter text directly with the remote control keypad or open a full keyboard on top of the text entry menu. Favourite channels In the Channel list you can mark a channel as a favourite. You can set the Channel list to only zap through your list of favourite channels .
Programme guide options With a programme selected in the guide, press rOPTIONS to select the following: • Set reminder To set an on-screen reminder for when a programme is due to start, select Set reminder and press OK. The programme is marked with a © (Clock). To cancel this reminder, select Clear reminder and press OK. • Change day View the previous or next day's programmes. • More info Shows the programme details and summary. • Search by genre View all programmes selected by genre.
• Auto zoom Automatically zooms the picture in to fill the screen as much as possible without distortion. Black bars may be visible. Not suitable for PC input. • Super zoom Removes the black bars on the side of 4:3 broadcasts. The picture is adjusted to fit the screen. • Movie expand Scales the picture to a 16:9 format. • Wide screen Stretches the picture to a 16:9 format. • Unscaled Expert mode for HD or PC input. Pixel for pixel display. Black bars may appear with pictures from a PC.
2.4 Watch 3D What you need This TV is prepared for the 3D Full HD accessory PTA02 (sold separately). PTA02 Installation 1 Switch off the TV. 2 Connect the 3D transmitter to the 3D connection 3D Out on the back of the TV. 3 The software update will start automatically and during the update the TV might switch off and on again. Do not press any key on the remote control and wait until the message 'Operation Successful' appears. 4 Unplug the USB device and switch the TV off and back on again.
2.5 Watch satellite Switch channels To watch satellite channels, press h (Home), select Watch satellite and press OK. Channel list pages The Channel list can have several pages. To view the next or previous Channel list page, press W or X. Options With the Channel list on screen, press rOPTIONS to select : • TV / Radio • Select list • Sort • Mark as favourite • Rename • Reorder • Channel lock TV / Radio Set the list to show TV or radio channels.
Mark as favourite In the Channel list, navigate to a channel you want to mark as favourite and press rOPTIONS. Select Mark as favourite. In the list, the favourite channel is marked with a F. You can unmark a favourite channel with Unmark favourite. Channel list of favourites You can set the Channel list to only show your favourite channels. With the list on screen, press rOPTIONS and select Select list. Select Favourites from the list and press OK.
2.6 Watch a connected device Select a device Add a connected device to the Home menu for easy selection later on. Read more about Add your devices in Help > Use your TV > Menus > Home menu. Select from the Home menu To select and watch a connected device or activity, press h to open the Home menu and select the device or its activity and press OK. Make sure the device is switched on. Select from the list of connections To open the list of connections, press ÚSOURCE.
2.7 Subtitles and languages Subtitles Programme subtitles are available most of the time. You can switch subtitles on or off. How to set subtitles depends on whether a channel is analogue or digital. Switch on subtitles To open the Subtitle menu, press SUBTITLE. You can switch subtitles On or Off. Select On during mute to show subtitles only when the sound is muted with m . For analogue channels To make subtitles available for a channel, switch to the channel and press TEXT to open Text.
3 More TV 3.1 Net TV What is Net TV? Net TV offers Internet applications called apps. These apps are tailored for your TV. With these apps you can read your national newspaper, look at infotainment, or rent a movie from a video store or watch programmes you missed with catch-up TV apps. A wide range of Net TV apps are available depending on your country. Configure Net TV specifics • The availability of Net TV apps vary per country.
Video memory To download a video, you must format an SD memory card as video memory. Insert the SD card into the SD card slot on the side of the TV. The TV starts formatting the SD card automatically. The SD card may be rejected if the write speed is insufficient for video transfer. Once formatted, leave the card permanently in the slot. The App Gallery To look for apps to add to your home page, select App Gallery and press OK. To add an app to the home page, select an app in the list and press Add.
3.2 Interactive TV What is iTV? Interactive TV can offer additional infotainment or programmes on a digital TV channel. Interactive TV is dependent on the country or broadcast. Benefits range from enhanced text to online TV and much more. For some iTV services, you need a high-speed connection to the Internet. Read Help > Setup > Network. Use iTV To open iTV, press the Red key while watching a digital channel. If interactive TV is available, the Home page of the broadcaster opens.
3.3 Text Text pages Open Text To access Text while you are watching TV channels, press TEXT. To close Text, press TEXT again. Open a Text page and press OK. Select a word or number with the navigation keys. Now press OK again to jump immediately to the next occurrence of this word or number. Press OK again to jump to the subsequent occurrence. To stop the search, press u until nothing is selected. Text from a connected device Some connected devices that receive TV channels can also offer Text.
To set your primary and secondary Text language, press h > Set up > Channel settings and select Primary or Secondary Text and select your preferred Text languages. Text 2.5 If available, Text 2.5 offers more colours and better graphics. Text 2.5 is activated as a standard factory setting. To switch it off, select h > Setup > TV settings > Preferences > Text 2.5.
3.4 Videos, photos and music Browse USB You can view photos or play your music and videos from a USB memory device. Insert a USB device into the USB connection on the left-hand side of the TV while the TV is switched on. The TV detects the device and opens a list showing its content. If the list does not appear automatically, press h , select Browse USB and press OK. To To To To To pause or play, press OK. play the next file in the folder, press W. play to the previous file, press X.
Select a photo for Scenea 1 Select a photo from a connected USB device or from a connected PC. This photo must be in JPEG format. 2 With the photo highlighted in the Browse USB or Browse PC list, press rOPTIONS, select Set as Scenea and press OK. By agreeing to overwrite the current photo, the new photo is set. Scenea lounge light To switch off Ambilight when Scenea is on, press tADJUST. Or press Ambilight on the front of the TV.
3.5 Games Play a game Add a game console In the Home menu, start Add your devices to add the console to the Home menu for easy selection later on. When adding a game console to the Home menu, select Game when the TV asks for the device type. If your game console is an EasyLink HDMI -CEC device it might add itself to the Home menu. Smart setting - Game The Smart picture setting Game sets the TV to the ideal Game settings without picture lag.
3.6 Locks and timers Child locks To prevent children from watching a channel or a programme, you can lock channels or lock age-rated programmes. Parental rating Some digital broadcasters have rated their programmes. When the rating is equal or higher than the rating you have set for your child’s age, the programme will be locked. To watch a locked programme you must enter the child lock code. The parental age rating is set for all channels.
4 Setup 4.1 Picture and sound Smart settings If you select a Smart setting in the ADJUST menu, you can again change the settings of the selected Smart setting with the Picture and sound settings in Setup. The Smart setting remembers your changes. Reset a Smart setting To reset a Smart setting to its original values, select the Smart setting you want to reset in the ADJUST menu. Then press h > Setup > TV settings, select Reset, press OK and confirm.
Auto switch off If no keys on the TV remote control were pressed during a 4hour period, the TV switches off automatically to save energy. You can switch off this Auto switch off. If you use the TV as a monitor or use a digital receiver to watch TV (a set top box - STB) and you do not use the remote control of the TV, switch off the automatic switch off.
4.2 Ambilight Placement For the best Ambilight effect : • Dim the lighting conditions in the room and position the TV up to 25 cm away from the wall. • Adjust Ambilight according to the colour of your wall at home in the Wall colour setting. • To prevent poor infrared remote control reception, position your devices out of sight of Ambilight. Ambilight colour To set the Ambilight colour, select Ambilight colour and press OK.
4.3 Channels Reorder and rename You can reorder and rename channels in the Channel list. To reorder or rename a channel, read Help > Use your TV > Watch TV > Channel list. Update channels The TV puts all installed channels in the Channel list. If you receive digital channels, you can set the TV to automatically update the list with new channels. You can also start an update of the Channel list yourself. Automatic channel update Once a day, at 6 AM, the TV updates the channels and stores new channels.
DVB-C channel installation For ease of use, all DVB-C settings are set to automatic. If your DVB-C provider gave you specific DVB-C values, like a symbol rate or a frequency, enter these values when the TV asks for them during installation. DVB-T + DVB-C You can set up your TV for DVB-T and DVB-C. Install one system followed by the other. When both installations are complete, the Channel list will show both DVB-T and DVB-C channels.
4.4 Satellite channels Introduction As well as the DVB-T and DVB-C reception, this TV has a builtin satellite DVB-S receiver. With a satellite dish antenna connected, you can receive digital satellite channels . You do not need an external satellite receiver. 4 Install channels To install all channels for the satellites you found, press Install. The installation can take several minutes per satellite. When the installation is finished, you can find all channels in the satellite Channel list.
Update channels If satellite channels are already installed, you can update the channel list with possible new channels from all installed satellites. To update the satellite channels, press h > Setup > Search for satellite. Select Update channels and press OK. The TV scans the satellites for new channels and adds them to the list. Empty channels are removed from the list. The update can take several minutes per satellite. When the update has finished, the Channel list for satellites is updated.
4.5 Network Benefits Browse PC If you connect the TV to a home network, you can play photos, music and videos from your computer or storage device. Once the network is installed on the TV, you can find and play the files from your PC on the TV screen. Net TV If you connect the TV to a home network, you can link up the TV to Net TV. Net TV offers Internet services and websites tailored to your TV. Play music and videos, consult infotainment, rent movies and much more.
3 Enter the code printed on the CD-ROM envelope. 4 Click the 'Download now' button to download the free Wi-Fi MediaConnect software. 5 Once downloaded, start the file 'Wi-Fi MediaConnect_setup.exe'. Follow the instructions on screen. TV network name If you have more then one TV in your home network, you can rename this TV. To rename this TV in the network, press h > Setup > Network settings and select TV network name.
4.6 Devices EasyLink HDMI-CEC With EasyLink HDMI -CEC your TV and the connected devices can work together. You can use the TV remote control to operate EasyLink devices. The device needs to be connected with an HDMI cable. Devices with EasyLink appear automatically in the Home menu. Setup The TV comes with EasyLink switched on. Make sure that all HDMI -CEC settings are properly set up on the connected EasyLink devices. EasyLink might not work with devices from other brands.
4.7 Universal access Switch on With Universal access switched on, the TV is set for use for hearing and visually impaired people. Switch on To switch on Key beep, press rOPTIONS, select Universal access and press OK. Select Key beep and select On. If Universal access does not appear in the Options menu, switch on Universal access in the Setup. Read Help > Setup > Universal access > Switch on. Switch on If you did not switch on Universal access during the installation, you can still switch it on in Setup.
4.8 Software Current version To view the current TV software version, press h > Setup > Software settings and press OK. Select Current software info and read Version: Update from Internet Do not . . . • press O twice • use the O switch on the TV The TV switches itself off (for 10 seconds) and then back on again. Please wait. The TV software has been updated. You can use the TV again. To prevent an accidental update of the TV software, delete the autorun.upg file from the USB memory device.
5 Connections 5.1 First connections Power cable Insert the power cable into the power socket of the TV. When disconnecting the power cable, always pull the plug, never the cable. Satellite antenna cable Locate the F-type satellite antenna connection at the side of the TV. Attach the satellite antenna cable to this connection. Although this TV has a very low standby power consumption, switch off the TV with the power switch to save energy if you do not use the TV for a long period of time.
5.2 About cables Cable quality Before you connect devices to the TV, check which connectors are available on the device. Connect the device to the TV with the highest quality connection available. Good quality cables ensure a good transfer of picture and sound. Read the other chapters of About cables . The connections diagrams shown in Help > Connections > Connect devices are recommendations. Other solutions are possible.
Video If you have a device with only a Video (CVBS) connection, you need to use a Video to SCART adapter (not supplied). Connect the adapter to the SCART connection of the TV. You can add the Audio L/R connections (mini-jack 3.5 mm). VGA Use a VGA cable (DE15 connector) to connect a computer to the TV. With this connection you can use the TV as a computer monitor. You can add an Audio L/R cable for sound (mini-jack 3.5 mm).
5.3 Connect devices SoundBar Use an HDMI cable to connect the device to the TV. If you use the HDMI -ARC connections on both TV and device, no other cable is needed. If not, read on. If you do not use the HDMI -ARC connection, add a digital audio cable (cinch coaxial). Blu-ray Disc / DVD player Use an HDMI cable to connect the device to the TV.
Home Theatre System with disc player Use an HDMI cable to connect the device to the TV. If you use the HDMI -ARC connections on both TV and device, no other cable is needed. If not, read on. If you do not use the HDMI -ARC connection, add a digital audio cable (cinch coaxial).
Audio to Video synchronisation (sync) If the sound does not match with the video on screen, you can set a delay on most DVD Home Theatre Systems to match the sound and video. Read more about Audio to Video sync in Help > Setup > Devices > Audio to Video sync. Do not connect the audio signal from a DVD player or other device directly to the Home Theatre System. Always route the sound through the TV first. Recorder Use 2 antenna cables to connect the antenna to the device and the TV.
Digital receiver / Sat. If you use a digital receiver to watch TV (a set top box - STB) and you do not use the remote control of the TV, then switch off the automatic switch off. This will prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV. To switch off the automatic switch off, press the green key while you are watching TV channels and select Auto switch off and select Off.
Then use an HDMI cable to connect the digital receiver to the TV. Finally, use an HDMI cable to connect the Disc Recorder to the TV. Dig. receiver + Disc-R + Home Theatre If you use a digital receiver to watch TV (a set top box - STB) and you do not use the remote control of the TV, then switch off the automatic switch off. This will prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV.
First, use 3 antenna cables to connect the devices to the TV. Then use an HDMI cable to connect the digital receiver to the TV. Then use an HDMI cable to connect the Disc Recorder to the TV. Then use an HDMI cable to connect the Home Theatre System to the TV.
If you do not use the HDMI -ARC connection on the TV and the device, add a digital audio cable (cinch coaxial). Digital HD receiver If you use a digital receiver to watch TV (a set top box - STB) and you do not use the remote control of the TV, then switch off the automatic switch off. This will prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV.
Use an HDMI cable to connect the device to the TV.
5.4 Connect more devices Game Connect a game console to the side or back of the TV. You can use an HDMI, YPbPr or SCART connection. If your game console only has Video (CVBS) and Audio L/R output, use a Video Audio L/R to SCART adapter to connect to the SCART connection. Read more about Games in Help > More TV > Games. Use an HDMI cable to connect the device to the side of the TV. Or use a SCART adapter to connect the device to the TV.
If the list with the content of the camera does not appear automatically, your camera might need to be set to transfer its content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera. Camcorder Connect a camcorder to the side or back of the TV. You can use an HDMI, YPbPr or SCART connection. If your camcorder only has Video (CVBS) and Audio L/R output, use a Video Audio L/R to SCART adapter to connect to the SCART connection.
TV as PC monitor You can connect the TV to your home network wireless. With Wi-Fi MediaConnect, you can use the TV as a PC monitor. Read Help > Setup > Network > Wi-Fi MediaConnect. Read on to connect a computer to the TV as a PC monitor wired. You can use a VGA cable or a DVI to HDMI adapter. Use a VGA cable to connect the PC to the VGA connector and an audio L/R cable to connect the VGA Audio L/R to the back of the TV.
Ideal TV setting Set the TV picture format to Unscaled for the sharpest picture quality. While watching TV, press rOPTIONS, select Picture format and select Unscaled. For a list of supported resolutions see Help > Specifications > Display resolutions. Decoder Use a SCART cable to connect a decoder that decodes analogue antenna channels. Use the EXT1 connector on the back of the TV. You have to assign the TV channel as a channel to be decoded. Then assign the connection where the decoder is connected.
5.5 Network Wireless To set up the wireless network connection, read Help > Setup > Network. Wired To set up the wired network connection, read Help > Setup > Network Connect the router to the TV with a network cable. To fulfil EMC regulations, use a shielded FTP Cat. 5E Ethernet cable.
5.6 SD card Memory size To store videos downloaded from a Video store on Net TV, you need to insert an SD memory card into the TV SD card slot. Once formatted, leave the card permanently in the slot. SD memory card size Use a SD HC (High Capacity) memory card with at least 4GB of storage capacity. For high-definition (HD) video, use an SD card with at least 8GB of storage capacity. Use a speed class 2 card or more. Read more about renting videos in Help > More TV > Net TV > Video stores.
5.7 Common interface CAM CAM Scrambled digital TV channels can be decoded with a Conditional Access Module (CAM). Digital TV service operators provide the CAM when you subscribe to their services. Contact a digital TV service operator for more information and to see terms & conditions. Insert a CAM Switch off the TV before inserting a CAM. Look on the CAM for the correct method of insertion. Incorrect insertion can damage the CAM and the TV. Look for the common interface slot on the back of the TV.
5.8 3D 3D This TV is prepared for the 3D Full HD accessory PTA02 (sold separately). PTA02 Installation 1 Switch off the TV. 2 Connect the 3D transmitter to the 3D connection 3D Out on the back of the TV. 3 The software update will start automatically and during the update the TV might switch off and on again. Do not press any key on the remote control and wait until the message 'Operation Successful' appears. 4 Unplug the USB device and switch the TV off and back on again. Your TV is ready to watch 3D.
6 Troubleshooting 6.1 Contact information If the advice and suggestions in Troubleshooting do not help resolve the problem, try switching the TV off and back on again. Warning If your TV breaks down, NEVER try to repair the TV yourself. Consumer Care If the TV problem is not solved you can call the Philips Consumer Care hotline in your country. Look up the TV model and serial number before you call. Find the telephone number on the documentation that came with the TV. Or consult our website www.philips.
6.2 TV and remote control The TV does not switch on • Switch the TV off and on again with the switch on the bottom of the TV. • Check the power cable connection. • Try using the keys on the TV to switch on. The TV does not switch on from standby • Check that the batteries of the remote control are not empty or weak. Check their + / - orientation. • Try using the keys on the TV to switch on. The TV does not respond to the remote control • Check that the batteries of the remote control are not empty or weak.
6.3 TV channels Some TV channels are gone • Check if the correct list is selected in the Channel list. Press ¬FIND to open the Channel list, then press rOPTIONS and select the list you need with Select list. • A channel could be hidden in the Channel list. Read more about Channel list in Help > Use your TV > Watch TV > Channel list. No digital channel found during installation • Check if the TV supports DVB-T or DVB-C in your country.
6.4 Picture and sound No picture • Check if the antenna is connected properly. • Check if the correct device is selected and connected properly. • Check the contrast or brightness setting in h > Setup > TV settings > Picture > Contrast or Brightness. The picture is poor • Bad weather can influence the picture quality. • Check if the antenna is connected properly. • Non-earthed audio devices, neon lights, high buildings or mountains can influence the picture quality.
6.5 Devices HDMI connections • The HDMI -HDCP procedure might take a few seconds before the picture from a device appears. • If the TV does not recognise the device and there is no picture, try switching from one device to another and back again to restart the HDCP procedure. Or switch the device off and back on again. • If sound interruptions occur persistently, see the user manual of the device to check the output settings. If that does not help, connect an additional audio cable.
6.6 Videos, photos and music The files on my USB device are not shown • Set your device (camera) to ‘Mass Storage Class’ compliant. • The USB device may need specific driver software. Unfortunately, this software cannot be downloaded to your TV. • Not all audio and picture files are supported. See the list in Help > Specifications > Multimedia. Files from a USB device do not play back smoothly • The transfer performance of the USB device limits the transfer rate.
6.7 Network Wireless network not found or distorted • Microwave ovens, Dect phones or other WiFi 11b devices in your neighbourhood might disturb the wireless network. • Make sure that the firewalls in your network allow access to the TV wireless connection. • If the wireless network does not work properly in your home, try the wired network installation. Read Help > Setup > Network > Wired installation.
7 Specifications 7.1 Software Software version To view the current TV software version, press h > Setup > Software settings and press OK. Select Current software info and read Version:. Open source software This television contains open source software. Philips hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences.
7.2 Environmental Energy saving Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Light sensor To save energy, the built -in ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens. Energy saving The energy saving Smart picture setting, combines several TV settings that result in saving energy.
7.3 Power and reception Power Product specifications are subject to change without notice. For more specification details of this product, see www.philips.com/support. Power • Mains power : AC 220-240V +/-10% • Ambient temperature : 5°C to 35°C • Standby power consumption : < 0.15W • Power saving features : Light sensor, Eco mode, Picture mute (for radio), Auto switch-off timer, Eco settings menu.
7.4 Display and sound Display / Picture • Diagonal size : - 40PFL9705 : 102cm / 40" - 46PFL9705 : 116cm / 46" • Picture enhancement : - Perfect Pixel HD Engine - LED Pro - 400Hz Clear LCD* • • • • • • Display type : LCD Full HD, 2D segmented LED backlight Panel resolution : 1920 x 1080p Color processing : 2250 trillion colors 17bit RGB Brightness : 500 cd/m2 Dynamic contrast : 10.000.000:1 Response time (typical) : 0,5 (BEW equiv.
7.
7.6 Multimedia Connections • USB 2.0 • Ethernet LAN RJ -45 • Wi-Fi 802.11b/g/n (built-in) Supported USB file systems • FAT 16, FAT 32, NTFS Playback formats • Containers : MPEG Program Stream, MPEG Transport Stream, AVI, MPEG-4, Matroska, Windows Media, ASF • Video Codecs : MPEG-1, MPEG-2, MPEG-4 Part 2, MPEG-4 AVC (H264), WMV9 • Audio Codecs : MP3, AAC, HE-AAC V1, HE-AAC V2, WMA, AC3 • Image Codecs : JPEG • Limitations : WMA (V2 up to V9.2), MPEG-4 AVC (up to level 4.
7.7 Connectivity TV Rear • EXT1 Scart : Audio L/R, CVBS in, RGB • EXT2 Scart : Audio L/R, CVBS in, RGB • EXT3 : Y Pb Pr, Audio L/R • VGA (D-sub 15), Audio In (stereo mini-jack 3.5mm) • HDMI 1 - ARC in (HDMI v1.4) • HDMI 2 in (HDMI v1.3) • HDMI 3 in (HDMI v1.3) • Audio In (DVI to HDMI)(stereo mini-jack 3.5mm) • • • • Audio Out L/R — display synchronised (coaxial -cinch -S/PDIF) Headphones (stereo mini-jack 3.5mm) Network — (RJ45) 3D Out TV Side • HDMI Side in (HDMI v1.
7.8 Dimensions and weights 40PFL9715 Width 955 mm Height 596 mm Depth 69mm Weight ±14 kg . . . with TV stand Height 632 mm Depth 240 mm Weight ±16 kg 46PFL9715 Width 1088 mm Height 671 mm Depth 69 mm Weight ±19 kg . . . with TV stand Height 707 mm Depth 260 mm Weight ±22 kg UMv 3104 327 0053.
Index L Lock code M Media server software 84 Music with photos 37 A Adjust menu 21 Age rating, satellite 29 Ambilight colour 43 Ambilight, setup 43 Ambilight, switch on 43 Audio Description 51 Audio Out delay 50 Auto switch off 42 N Net TV 32 Net TV, connection 32 Net TV, open 32 Network, wired connection 68 Network, wired installation 49 Network, wireless installation 48 B Balance 41 Black bars 25 C CAM 70 Channel list copy 44 Channel list, options 23 Channel, favourite 24 Channel, rename 24 Channel,
Text, T.O.P.
(XURSH &( 'HFODUDWLRQ RI FRQIRUPLW\ (QJOLVK +HUHE\ 3KLOLSV ,QQRYDWLYH $SSOLFDWLRQV 1 9 GHFODUHV WKDW WKLV WHOHYL= VLRQ LV LQ FRPSOLDQFH ZLWK WKH HVVHQWLDO UHTXLUHPHQWV DQG RWKHU %3"3120')-%&1,.,&0.)&J)K,%34',13)@AAABCBDH6 !"#$"% !"#"$%&''()*+,",-.)/00&12',13)!--",42',&0.)5676)08,"2'9&:&;()+&<8)2) WHOHYt]Ly PHJIHOHO D YRQDWNR]y DODSYHWʼn N|YHWHOPpQ\HNQHN pV D] (& LUiQ\HOY HJ\pE HOʼntUiVDLQDN 'HXWVFK L,3%;,')3%9"G%')*+,",-.)/00&12',13)!--",42',&0.)5676)?2..).,4+)?2.
K"#&(%&+,#<"'-(&,"# !"#$%&'%(+ HLHH+LLLL+MNOG++P.'(&),&"Q )$*#'+,-,)$*#'./$+ HLHH+LH+IRH++P.'(&,0+1+.'(&),&Q 0DJ\DURUV]iJ+ HV+LHHIL+ILR++P2#.;/#/0+6Z5[0Q :$5$"*(%5+ HLHH+HGO+HHMV++P.
