Register your product and get support at www.philips.
Contents 10.1 Sleep timer 32 10.2 Clock 32 10.3 Auto switch off 32 1 Your new TV 3 1.1 Pause TV and recordings 3 1.2 EasyLink 3 11 Your photos, videos and music 33 2 Setting up 4 2.1 2.2 2.3 2.4 2.5 2.6 11.1 From a USB connection 33 Read safety 4 TV stand and wall mounting 4 Tips on placement 4 Power cable 4 Antenna cable 5 Satellite dish 5 12 Pause TV 35 12.1 Pause TV 35 13 Recording 36 13.1 What you need 36 13.2 Record a programme 36 13.3 Watch a recording 36 3 Connections 6 3.
1 Your new TV 1.1 Pause TV and recordings If you connect a USB Hard Drive, you can pause and record a broadcast from a digital TV channel. Pause your TV and answer that urgent phone call or simply take a break during a sports match, while the TV stores the broadcast on the USB Hard Drive. You can start watching again later. 1.2 EasyLink With EasyLink you can operate a connected device, like a Bluray Disc player, with the remote control of the TV.
meet safety standards according to the TV's weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury. 2 Setting up 2.1 Read safety Wall mounting Read the safety instructions first before you use the TV. Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . ..
2.4 2.6 Power cable Satellite dish - Insert the power cable into the POWER connector on the back of the TV. - Make sure the power cable is securely inserted in the connector. - Make sure that the power plug, in the wall socket, is accessible at all times. - When you unplug the power cable, always pull the plug, never pull the cable. Attach the satellite F-type connector to the satellite connection SAT at the back of the TV.
3 EasyLink HDMI CEC Connections If your devices are connected with HDMI and have EasyLink, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched On on the TV and the connected device. 3.1 Tips on connections DVI to HDMI Use a DVI to HDMI adapter if your device only has a DVI connection. Use one of the HDMI connections and add an Audio L/R cable (mini-jack 3.5mm) to Audio In for sound, on the back of the TV.
respective owners. Audio Out - Optical Audio Out - Optical is a high quality sound connection. This optical connection can carry 5.1 audio channels. If your device, typically a Home Theatre System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In Optical connection on the HTS. The Audio Out - Optical connection sends the sound from the TV to the HTS.
One-touch standby It may take a few minutes before the CAM is activated. Removing the CAM will deactivate the broadcast service on TV. If a CAM is inserted and subscription fees are paid, (connection methods can differ), you can watch the TV broadcast. The inserted CAM is exclusively for your TV. When you press on the TV remote control, the TV and all HDMI-CEC compliant devices switch to standby mode. 3.
Next to the antenna connection, add an HDMI cable to connect the device to the TV. Alternatively, you can use a SCART cable if the device has no HDMI connection. If the Home Theatre System has no HDMI ARC connection, add an optical audio cable (Toslink) to send the sound of the TV picture to the Home Theatre System. Auto switch off Switch off this automatic timer, if you only use the remote control of the Set-top box.
Audio Out offset Problems with HTS sound If you cannot set a delay on the Home Theatre System, you can set the TV to sync the sound. You can set an offset that compensates the time necessary for the Home Theatre System to process the sound of the TV picture. You can set the value in steps of 1ms. Maximum setting is 12ms. The Audio out delay setting should be switched on.
If the DVD player is connected with HDMI and has EasyLink CEC, you can operate the player with the TV remote control. 3.10 USB Hard Drive 3.9 What you need Game console If you connect a USB Hard Drive, you can pause or record a TV broadcast. The TV broadcast must be a digital broadcast (DVB broadcast or similar). HDMI For best quality, connect the game console with an High speed HDMI cable to the TV To pause To pause a broadcast, you need a USB 2.
3.12 Camcorder HDMI For best quality, use an HDMI cable to connect the camcorder to the TV. 2. Switch on the USB Hard Drive and the TV. 3. When the TV is tuned to a digital TV channel, press (Pause). Trying to pause will start the formatting. Follow the instructions on screen. When the USB Hard Drive is formatted, leave it connected permanently. Warning The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC.
Alternatively, you can use a DVI to HDMI adapter to connect the PC to HDMI and an audio L/R cable (mini-jack 3.5mm) to AUDIO IN L/R on the back of the TV. Settings Ideal monitor setting If your computer is added as a Computer type of device in the Source menu (the list of connections), the TV is set to the ideal Computer setting automatically. If you use your computer to watch movies or use it to play games, you might want to set the TV back to the ideal TV watching or gaming setting.
4 Switch on 4.1 On or Standby Make sure you plugged in the mains power on the back of the TV before you switch on the TV. If the red indicator light is off, press the power button on the side of the TV to put the TV in standby - the red indicator will light up. With the TV in standby, press on the remote control to switch the TV On. Switch to standby To switch the TV to standby, press on the remote control. Switch Off To switch the TV Off, press the power button on the side of the TV.
4. BACK To switch back to the previous channel you selected. To close a menu without changing a setting. 5 Remote control 5. HOME To open or close the home menu. 5.1 Key overview 6. EXIT To switch back to watching TV. Top 7. OPTIONS To open or close the Options menu. 8. OK key To confirm a selection or setting. 9. Arrow / navigation keys To navigate up, down, left or right. 10. LIST To open or close the channel list. 1. Standby / On To switch the TV On or back to Standby. Bottom 2.
5.2 IR sensor The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV. 5.3 Batteries 1. Slide the battery door in the direction shown by the arrow. 2. Replace the old batteries with 2 type AAA-LR03-1.5V batteries. Make sure the + and the - ends of the batteries line up correctly. 3. Reposition the battery door. 4. Slide it back until it clicks.
6 Channel list TV channels View all channel list 6.1 1. While watching a TV channel, press LIST to open the channel list. 2. Press OPTIONS to open Option menu. 3. Select List, then you can select All, Favourites, Radio, and New channels. Watching TV channels Switch channels To watch TV channels, press . The TV tunes to the TV channel you last watched. Favourite channels Alternatively, press to open the Home menu and select TV and press OK.
1. Press and select Setup and press OK. 2. Select Channel settings > Child lock > Change code and press OK. 3. If a code is set already, enter the current Child lock code and then enter the new code twice. Rename channels You can rename channels in the channel list. 1. Select the channel you want to rename in one of the channel lists. 2. Press OPTIONS. 3. Select Rename and press OK. The new code is set. Forgotten your code? To override and enter a new child lock code in case you forget it, enter 8888.
Select a Text page Text options To select a page . . . In Text, press OPTIONS to select the following . . . 1. Enter the page number with the number keys. 2. Use the arrow keys to navigate. 3. Press a colour key to select a colour-coded subject at the bottom of the screen. - Freeze page / Unfreeze page To stop the automatic rotation of subpages. - Dual screen / Full screen To show the TV channel and Text alongside each other. Text sub-pages - T.O.P. overview To open T.O.P. Text.
To show subtitles when the broadcasted programme is not in your language — the language you set for the TV, select Automatic. Also, this setting will show subtitles when you mute the sound with . For analogue channels, subtitles must be made available in Text. To set the primary and secondary audio language . . . 1. Press and select Setup and press OK. 2. Select Channel settings and select Languages. 3. Select Primary audio language or Secondary audio language and press OK. 4.
3. Select Channel installation > Automatic channel update > Off. 3. Press OK to confirm. 4. Press , repeatedly if necessary, to close the menu. Start an update To start an update yourself . . . Channel list copy 1. Press and select Setup and press OK. 2. Select Search for channels and press OK. 3. Select Update channels and follow the instructions on screen. The update may take a few minutes. Introduction Channel list copy is intended for dealers and expert users.
the other TV. 3. To start the channel list upload, press and select Setup and press OK. 4. Select TV settings > General settings > Copy channel list > Copy to TV and press OK. You might be asked to enter the Child lock code of this TV. 5. The TV notifies you if the channel list is copied to the TV successfully. Unplug the USB memory device. Manual. To an already installed TV DVB-T + DVB-C 1. Verify the country setting of the TV. (To verify this setting, press and select Setup and press OK.
To fine tune a channel, select Fine tune and press OK. You can fine tune the channel with or . If you want to store the channel found, select Done and press OK. - Store You can store the channel on the current channel number or as a new channel number. Select Store current channel or Store as new channel. Frequency scan Select the method of searching for channels. You can select the faster Quick scan method and use the predefined settings used by most cable providers in your country.
7 Channel list options Satellite channels To view the channel list options on the current channel . . . 1. With the All channels list on screen, select a channel and press OPTIONS. 2. Select the option you want and press OK. 7.1 Watching satellite channels Available options for satellite channels . . . - Only for TVs with a built-in satellite tuner. - Satellite Filter the channel list to only show the channels of a specific satellite or show the channels of all satellites.
Set up your favourites list Lock a channel To compose a list of your favourite channels . . . You can lock a channel to prevent children from watching it. To watch a locked channel you need to enter the Child lock code. You cannot lock programmes from connected devices. 1. While watching a channel, press LIST to open the channel list. 2. Select the Favourites list. 3. The TV will ask you to start adding channels immediately. Press OK.
the number of satellites you want to install for Unicable. Select the setting you want and press OK. 4c - If the exact number of satellites is set or you completed the Unicable settings, select Search and press OK. Forgotten your Child lock code? If you forgot your code, you can override the current code and enter a new code. 1. Press and select Setup and press OK. 2. Select Satellite settings > Child lock > Change code and press OK. 3. Enter the overriding code 8888. 4.
User band number Remove a satellite In a Unicable system, each connected satellite receiver must be numbered (e.g. 0, 1, 2 or 3 etc.). You can remove one or more satellites from your current satellite installation. You remove the satellite and its channels. However, some satellite operators do not allow removing a satellite. You can find the available user bands and their number on the Unicable switchbox. User band is sometimes shortened as UB.
1. Press and select Setup and press OK. 2. Select Search for satellite and press OK. 3. Select Update channels and press OK. 4. If you want to check which satellites are set for updating, select Settings and press OK. 5. With the arrow keys, mark or unmark the satellites for updating. Select Done and press OK. 6. Select Update and press OK. The update may take a few minutes. 7. Select Finish and press OK. Speech The audio commentary can also hold subtitles for the words which are spoken.
Changing the installation settings did not solve my problem - All settings, satellites and channels are only stored at the end of the installation when you finish. All satellite channels are gone - If you use a Unicable system, make sure you assigned a unique user band number to the satellite receiver in the Unicable settings. It might be that another satellite receiver is using the same user band number.
day. Select Previous day, Today or Next day and press OK, to select the day of the schedule. 8 TV guide 8.1 Using the TV guide Search by genre What you need If the information is available, you can look up scheduled programmes by genre like movies, sports, etc. With the TV guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown.
9 Sources 9.1 Sources list In the list of connections - the Source menu - you can find the devices connected to the TV.From this Source menu, you can switch to a device. Sources menu 9.3 To open the Sources menu, press SOURCES. To switch to a connected device, select the device with the arrows (left) or (right) and press OK. To close the Source menu without switching to a device, press SOURCES again. EasyLink With EasyLink you can operate a connected device with the TV remote control.
3. Press , repeatedly if necessary, to close the menu. 10 Timers and clock 10.1 Sleep timer With the sleep timer, you can set the TV to switch to standby automatically after a preset time. To set the sleep timer . . . 1. Press and select Setup and press OK. 2. Select TV settings > General settings > Sleep timer. With the slider bar you can set the time to up to 180 minutes in increments of 5 minutes. If set to 0 minutes, the sleep timer is switched off.
- Start slideshow, Stop slideshow Start or stop slideshow. 11 Your photos, videos and music - Slideshow transitions Set the transition from one picture to the next. - Slideshow frequency Select the display time for each photo. 11.1 From a USB connection - Repeat, Play once View the pictures repeatedly or once only. What you need - Shuffle off, Shuffle on View the pictures in sequential order, or at random.
- Repeat, Play once Play videos repeatedly or once. - Shuffle on, Shuffle off Play videos in sequence or at random. - Show info Display the file name. To close Browse USB, press and select another activity.
12 Pause TV 12.1 Pause TV You can pause a TV broadcast and resume watching it later. Only digital TV channels can be paused. You must connect a USB Hard Drive to buffer the broadcast. You can pause a broadcast for a maximum time span of 90 minutes. Pause or resume a broadcast To pause a broadcast, press (Pause). A progress bar appears briefly on screen. To call up the progress bar, press (Pause) again. To resume watching, press (Play).
13 List of recordings Recording To view the list of recordings and scheduled recordings, press , select Recordings and press OK. 13.1 In this list, you can select a recording to watch, remove recorded programmes, adjust the end time of an ongoing recording or check the free disc space. What you need To record a TV programme you need . . .
14 Picture settings Settings Backlight contrast 14.1 With Backlight contrast, you can adjust the brightness of the display backlight. Picture To adjust the level . . . 1. Press and select Setup and press OK. 2. Select TV settings > Picture > Backlight contrast. 3. Press (right) and adjust the value with (up) or (down). 4. Press , repeatedly if necessary, to close the menu. Picture style For easy picture adjustment, you can select a preset setting with Picture style. 1.
3. Press (right) and select On or Off. 4. Press , repeatedly if necessary, to close the menu. 2. Select TV settings > Picture > Advanced > Custom tint. 3. Press (right). 4. Select a setting with the arrow keys. (WP is white point and BL is black level.) 5. Press OK to confirm a setting. You can also select one of the presets in this menu. 6. Press , repeatedly if necessary, to close the menu.
3. Select TV settings, navigate to the individual setting and adjust it. 4. Press to close the menu to store your setting. 14.3 Format and edges To return to the original Sound style values . . . 1. Press and select Setup and press OK. 2. Select TV settings > Sound > Restore style. Picture format If black bars appear on top and bottom or on both sides of the picture, you can adjust the picture format to a format that fills the screen. To change the picture format . . . 1.
2. Select TV settings > Sound > Advanced > Clear sound. 3. Press (right) and select On or Off. 4. Press , repeatedly if necessary, to close the menu. Advanced sound settings Auto volume levelling With Auto volume leveling, you can set the TV to automatically level out sudden volume differences. Typically at the beginning of adverts or when you are switching channels. HDMI1-ARC If you do not need an Audio Return Channel (ARC) on any of the HDMI connections, you can switch the ARC signal off.
to TV speakers if necessary. To set the TV speakers . . . 1. Press and select Setup and press OK. 2. Select TV settings > Sound > Sound output. 3. Press (right) and select Off, TV speakers, EasyLink or EasyLink autostart. 4. Press , repeatedly if necessary, to close the menu. To switch to speakers directly . . . 1. While watching TV, press . 2. Select Speakers and select TV or Amplifier (audio system). 3. Press , repeatedly if necessary, to close the menu.
15 European energy label Specifications The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is, the lower the energy it consumes. On the label, you can find the energy efficiency class, the average power consumption of this product in use and the average energy consumption for 1 year. You can also find the power consumption values for this product on the Philips website for your country at www.philips.com/TV 15.
- Analogue video playback : NTSC; SECAM; PAL - Digital video playback : MPEG2 SD/HD (ISO/IEC 13818-2); MPEG4 SD/HD (ISO/IEC 14496-10) - Digital audio playback (ISO/IEC 13818-3) 1280 x 1024 - 60 Hz 1360 x 768 - 60 Hz 1600 x 900 - 60 Hz* 1680 x 1050 - 60 Hz* 1920 x 1080 - 60 Hz* 15.
Width 545.1 mm - Height 385.6 mm - Depth 145 mm - Weight ±3.26 kg - without TV stand: Width 726.5 mm - Height 435.6 mm - Depth 87.8 mm Weight ±4.83 kg - HDMI 2 - SERV. U: Service port - TV ANTENNA: 75 ohm coaxial (IEC) - SCART (RGB/CVBS): SCART adaptor - AUDIO IN (DVI): Stereo 3.5mm mini-jack - DIGITAL AUDIO OUT: SPDIF - Headphones: Stereo 3.5mm mini-jack - with TV stand: Width 726.5 mm - Height 462.3 mm - Depth 333.8 mm Weight ±4.
16 16.2 Software Software version To view the current TV software version . . . 16.1 1. Press and select Setup and press OK. 2. Select Software settings and press OK. 3. Select Current software info and see Release Version. 4. Press , repeatedly if necessary, to close the menu. Software update Update from USB It might be necessary to update the TV software. You need a computer and a USB memory device to upload the software on the TV. Use a USB memory device with 256MB free space.
the JPEG license, which can be found below. libsqlite3 (3.7.14) SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. Source: http://linuxappfinder.com/package/libsqlite3-0 This piece of software is made available under the terms and conditions of the SQLite public domain license, which can be found below. Openssl (1.0.0.
offer no warranty and accept no liability. For more information, contact jpeg-info@jpegclub.org. Ciccani . This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. The complete text of the license is found in the file COPYING.
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language.
on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 6.
might fall under other licenses. The details here are unclear. We do not worry about the licensing of the documentation and build code so much because none of these things are part of the core deliverable SQLite library. All of the deliverable code in SQLite has been written from scratch. No code has been taken from other projects or from the open internet. Every line of code can be traced back to its original author, and all of those authors have public domain dedications on file.
warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices.
Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. Finally, every program is threatened constantly by software patents.
circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work's users, your or third parties' legal rights to forbid circumvention of technological measures. 4. Conveying Verbatim Copies.
occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM).
organization, or substantially all assets of one, or subdividing an organization, or merging organizations.
version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Program. Later license versions may give you additional or different permissions.
The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs.
the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.
library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License.
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. This version of the GNU Lesser General Public License incorporates the terms and conditions of version 3 of the GNU General Public License, supplemented by the additional permissions listed below. 0. Additional Definitions. As used herein, “this License” refers to version 3 of the GNU Lesser General Public License, and the “GNU GPL” refers to version 3 of the GNU General Public License.
and conditions either of that published version or of any later version published by the Free Software Foundation. If the Library as you received it does not specify a version number of the GNU Lesser General Public License, you may choose any version of the GNU Lesser General Public License ever published by the Free Software Foundation.
6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file. 7. Disclaimer of Warranty.
then the TV returns to standby mode. This is normal behaviour. When the TV is disconnected and reconnected to the power supply, the startup screen is displayed at the next startup. To switch on the TV from standby, press on the remote control or the TV. 17 Troubleshooting and support The standby light keeps on blinking 17.1 Troubleshooting Disconnect the power cable from the power outlet. Wait 5 minutes before you reconnect the power cable. If the blinking reoccurs, contact Philips TV Consumer Care.
Select a non 'Auto' picture format. - Make sure that the USB storage device is set to Mass Storage Class compliant, as described in the storage device's documentation. - Make sure that the USB storage device is compatible with the TV. - Make sure that the audio and picture file formats are supported by the TV. Picture position is incorrect Picture signals from some devices may not fit the screen correctly. Check the signal output of the connected device.
17.5 Consumer Care / Repair For support and repair, call the Consumer Care hotline in your country. Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/support . TV model number and serial number You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV. Warning Do not attemp to repair the TV yourself.
18 Risk of injury or damage to the TV Safety and care - Two people are required to lift and carry a TV that weighs more than 25 kg or 55 lbs. 18.1 - If you mount the TV on a stand, only use the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can support the weight of the TV and the stand. Safety Important - When wall mounted, ensure that the wall mount can safely bear the weight of the TV set.
Lightning storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time. Low temperatures If the TV is transported in temperatures below 5°C or 41°F, unpack the TV and wait until the TV temperature reaches room temperature before connecting the TV to the power outlet.
consumers which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field (EMF) standards applicable at the time of producing the products. Philips is committed to develop, produce and market products that cause no adverse health effects.
Kensington Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world. Other trademarks All other registered and unregistered trademarks are the property of their respective owners.
Index 71
Powered by TCPDF (www.tcpdf.org) Contact information Argentina 0800 444 7749 Buenos Aires 0810 444 7782 België / Belgique 070 700 035 (0,15€/min.) Bosna i Hercegovina 033 941 251 (Lokalni poziv) Brazil 0800 701 0245 Sao Paulo 2938 0245 Бълария 02 4916 273 (Национален номер) Česká republika 228880895 (Místní tarif) Danmark 3525 8314 Deutchland 0180 501 04 69 (0,14€/Min.) Ελλάδα 2111983028 (Εθνική κλήση) España 902 88 10 83 (0,10€ + 0,08€/min.
