Technical data

62
200WP7 LCD
25
6
GENERAL PRODUCT SPECIFICATION
3.0 Electrical characteristics
3.1 Interface signals
The input signals can be applied in three different modes:
1). D-Sub Analog
Inputsignal:Video,Hsync.,Vsync
Video: 0.7 Vp-p, input impedance, 75 ohms @DC
Sync. : Separate sync TTL level, input impedance 2.2k ohm terminate
Hsync Positive/Negative
Vsync Positive/Negative
Composite sync TTL level, input impedance 5k ohm terminate
(Positive/Negative)
Sync on green video 0.3 Vp-p Negative (Video 0.7 Vp-p Positive)
2). Intel DVI Digital
Input signal: Single channel TMDS signal
3.2 Interface
3.2.1 D-Sub Cable
Length : 1.8 M +100/- 0 mm (fixed)
Connector type : D-Sub male with DDC2B pin assignments.
Blue connector thumb-operated jackscrews
USB hub
Input signal: Upstream input (V
BUS
, D+, D-, GND) via USB-B receptacle.
Output signal: Downstream output (V
BUS
, D+, D-, GND) through USB-A receptacle
BRAND : PHILIPS
20.1" TFT UXGA LCD Monitor
(HUDSON 7-200WP7)
TYPE : 200WP7ES/00
8639 000 16908
2006-02-16
2006-02-16
590
Jason Wang