Technical data

5
200WP7 LCD
Go to cover page
Connect thecables to the back ofyourcomputer by followingthese
steps:
(a)Turn off yourcomputer and unplug its power cord.
(b)Connect the monitor signal cabletothevideo connector on the back
ofyourcom
puter
(c)Plugthepower cord onyourcomputer and your monitor into a nearby
outlet.
(d)USB plug
(1) Connect USB upstream port onmonitor and the USB port onPC
with a USB cable.
(2) The USB downstream port is now ready for any USB device to
plug in
(
e)Turn onyourcomputer and monitor.Ifthe monitor displa ys animage,
installationiscomplete.
Note: The USB plug is apass through connectionwhether itcan
support USB 1.1 or USB 2.0 depends onyour PC's specification
Installing Your LCD Monitor
Front ViewProduct Description
1To switchmonitor's power On and Off
2To access OSD menu
3Toadjustthe OSD
4Toadjust brightness of the display
5Toadjustthe OSD
6Automatically adjustthe horizontal position,
vertical position, phaseand cloc
ksetting
AUTO
Rear View
1ACpower input
2DVI-Iinput
3D-SUBInput
4Kensington anti-thieflock
5USBupstream and downstream
Connect to PC
Connect thepower cord and DVI cabletothe back of the monitor firmly.
(Philipshas pre-connectedVGA cable for the first installation.)
Connection to PC