Technical data

29
Go to cover page
200WP7 LCD
To Monitor
D-sub/DVI cable
DC 8~12V
To Printer port
Power
indicator
To Monitor
D-sub cable
DC 8~12V
To Printer port
Power
indicator
Step 5 :Copy the .hex code to C:\200WP7 as shown in Fig. 5 .
6. Run the Easywriter program
Step 1 : Make a folder in your PC as shown in Fig. 3.
For example : C:\easywrite
Step 2 : Copy ISP Software Easywriter into your folder
as shown in Fig.3.
Step 3 : Unzip Easywriter.zip into your folder as shown in Fig. 3.
Step 4 : Double click the EasywriterV2.09.exe icon to run the
Application as Fig. 4.
.zip
Configuration and procedure
"Easywriter " The software
The tool (3138 106 10396)
is provided by Novatek to upgrade the
firmware of CPU.
is for the interface between "Parallel Port of
PC" and "15 pin-D-SUB connector of Monitor".
It is a windows-based program, which cannot be run in MS-DOS.
System and equipment requirements
1. An i486 (or above) personal computer or compatible.
2. Microsoft operation system Windows 95/98/2000/XP.
4. ISP as shown in Fig. 1
3. ISP Software " Easywrite "
TOOL (3138 106 10396)
5 Connect and Mains cord to Monitor as shown
in Fig. 2.
. ISP TOOL
Fig. 1
Fig. 4
Fig. 5
Fig. 6
Fig. 7
170S5
170S5
Update the firmware
1. Presstheloadhexthenselectthe.hexcodeasshowninFig.6
2. Press the AUTO to run the program,the firmware be updated as
showninFig7`Fig.8
Fig.8
PC
To printer port (LTP1)
To video card
Video cable
Connect to
Mains cord
Monitor (A)
200WP7 LCD (B)
D-Sub
AC POWER
Port
To
ToPC
DC 8-12V
313810610396
+
D ouble click the shortcut on the desktop
ISP Instruction