Technical data

Go to cover page

200WP7 LCD

DDC Instructions

Step 6: Save DDC data

Sometimes, you may need to save DDC data as a text file for using

in other IC chip. To save DDC data, follow the steps below:

1. Click (Save) icon (or click "file"-> "save as") from the tool bar

And give a file name as shown in Fig. 32.

The file type is EDID46 file (*.ddc) which can be open in WordPad.

By using WordPad, the texts of DDC data & table (128 bytes, hex

code) can be modified. If DDC TEXTS & HEX Table are completely

correct, it can be saved as .ddc flie to re-load it into DDC IC for DDC

Data application.

2. Click .Save

Step 7: Exit DDC program

Pull down the File menu and select Exit as shown in Fig. 33.

Step 5: Write DDC data

1. Configuration should be as Fig. 31. And press OK.

3. Click (Write EDID) icon from the tool bar to write DDC data.

Fig. 31

Fig. 33

Fig. 32

2. Access Factory Mode

[PushAUTO" "&OK" "buttonsatthesametimeand

holdit]+[Press power " " button untill comes out "Windows

screen"] => then release all button

- Turn off monitor.

Edid45.1

200P7

BOMCode

Panel Supplier CODE

AUO 1

CPT 2

LPL(LG)3

QDI4

CMO 5

B Z 3A0601 000001

SERIALNO

YEAR/WEEK

SERVICE VERSIONCHANGE CODE

BOMCODE(BILL OF MATERIAL)CODE

SITE CODE(PRODUCTIONCENTER)

BZCODE(AR-CZECH REPUBLIC

VN-HUNGARY(SZR),BZ-SUZHOU

DS-DONGGUAN)