Technical data

16
Go to cover page
200WP7 LCD
Troubleshooting
Vertical flicker appears
· Press the Auto button.
· Eliminate the vertical bars using the
Phase/Clock of More Settings in OSD Main
Controls.
Horizontal flicker appears
· Press the Auto button.
· Eliminate the vertical bars using the
Phase/Clock of More Settings in OSD Main
Controls.
The screen is too bright or too dark
· Adjust the contrast and brightness on Monitor
Setup. (The backlight of the LCD monitor has a
fixed life span. When the screen becomes dark
or begins to flicker, please contact your
dealer).
An after-image appears
· If an image remains on the screen for an
extended period of time, it may be imprinted in
the screen and leave an after-image. This
usually disappears after a few hours
An after-image remains after the power has been turned
off.
· This is characteristic of liquid crystal and is not
caused by a malfunction or deterioration of the
liquid crystal. The after-image will disappear
after a peroid of time.
Green, red, blue, dark, and white dots remains The remaining dots are normal characteristic of the liquid
crystal used in today’s technology
For further assistance, refer to the Consumer Information Centers list and contact Philips customer service
representative