Specifications

1. Technical Specifications and Connections
4
TPT1.0A LA
1.2.2.3.5 Component Video
The input signals are applied to display through Component
Video RCA Jack pin assignment
PIN NO. SIGNAL
1GND
2Redà Pr
3GND
4Blueà Pb
5GND
6GreenàY
1.2.2.3.6 SCART
Scart connector is only used in WE model. The Scart (Syndicat
des Constructeurs d'Appareils Radiorécepteurs et Televiseurs)
connector is used for combined audio and video connections.
Pin TV SCART
1 N/C
2 Right audio input
3 N/C
4 Audio ground
5 Blue ground
6 Left audio input
7 Blue output
8
0-2.5 volts (low) when:
TV output
4.5-7.5 volts (High-to-6v) when:
-inputting picture format setting is '16:9',
9-12 volts (high-to-12v) when:
-inputing picture format setting is '4:3'
9 Green ground
10 N/C
11 Green output
12 N/C
13 Red ground
14 N/C
15 Red output
16
0volt(low)when:-pin8oftheTVscartis
low
or when:
- Composite video signal
1-3 volts (high) when:
- video input setting is 'RGB',
17 Composite video output ground
18 Composite video input ground
19 N/C
20 Composite video input
21 Ground