Specifications

2
TPT1.2A LA
1. Technical Specifications and Connections and Chassis Overview
Index of this chapter:
1.1 Technical Specifications
1.2 Connections
1.3 Chassis Overview
Notes:
Figures below can deviate slightly from the actual situation,
due to the different set executions.
Specifications are indicative (subject to change).
·
·
2 Sound1.1.
Fig1-1
1.2.2 Input signal
1.2.2.1 Signal type
Display type : LCD
Screen size : 47"(119cm), 16:9
42"(107cm), 16:9
Resolution (HxV pixels) : 1920(H) x 1080(V)
Contrast ratio : 1000:1 (47")
Light output (cd/m2) : >400
Response time (ms) : 8ms(Typ.)
Viewing angle (HxV degrees) : 178/178
Tuning system : PAL D/K for 93 model
: PAL B/G
I and SECAM B/G D/K for
98 model
:PALD/K
I and NTSC-M for 79 model
Supported video formats : 640 x 350 60Hz
640 x 480 60Hz
720 x 400 60Hz
800 x 600 60Hz
832 x 624 60Hz
1024 x 768 60Hz
1280 x 720 60Hz
1280 x 768 60Hz
1360 x 768 60Hz
1280 x 1024 60Hz
1920 x 1080 60Hz
HD support timing : 1920X1080i 50 Hz
1920X1080i 59 Hz
1920X1080i 60 Hz
1920X1080p 60 Hz
1920X1080p 59 Hz
1920X1080p 50 Hz
1280X720P 60Hz
1280X720P 59Hz
1280X720P 50Hz
1440x576p 50 Hz
1440x576i 50 Hz
1440x480p 60 Hz
1440x480i 60 Hz
1440x480p 59 Hz
1440x480i 59 Hz
720X576P 50Hz
720X480P 60Hz
720X480P 59Hz
Sound systems : Stereo / Virtual Surround
Maximum power : 2 x 10W
1.1 Technical Specifications
1.1.1 Technical Specifications
Power Supply
-AC/DC Power adapter : 90V ~ 264VAC,50/60±2Hz
-Power consumption : 320W/Max(at PC mode),
320W/Max(at TV mode) with Audio.
-Power cord length : 1.8m
-Power cord type : 2pin Euro
3pin UK for 98
China for 93
3pinAus
2pinNAFTAfor79
-Power indicator : LED (On: Blue,Sleeping mode: Amber)
-Auto power saving : <2W
-Stand-by : <2W
Miscellaneous1.1.3
1.2 Connections
1.2.1 Signal Connector
1. Technical Specifications, Connections and Chassis Overview
Horizontal scan
-Horizontal : 30 - 70KHz
-Vertical : 56 - 76Hz
Dimensions (WxHxD in mm) : 1096.0 x 640.0 x 51.0
Ambient conditions:
-Temperature :0°Cto40°C
-Humidity :20 to 70%
1. Tuner: PAL D/K for 93 model
PAL B/G
I and SECAM B/G D/K for 98 model
PAL D/K
I and NTSC-M for 79 model
2. S/PDIF OUT : Digital audio output (HDMI audio output)
3. PVR OUT : Composite video output (CVBS) and audio
R/L(RCA jack)
4. AV audio IN : AV1 and S-Video audio R/L(RCA jack)
5. AV1 IN : Composite video input(AV)
6. S-Video 1 IN : S-video input (AV)
7. iTV Level 1
Rx/Tx communicate
8. Compair
Rx/Tx communicate
9. PC audio IN: audio R/L(mini-jack).
10. CVI 1 IN : Component input with YPbPr format with audio R/L.
11. CVI 2 IN : Component input with YPbPr format with audio R/L.
12. PC IN: VGA input (D-SUB connectors)
12. HDMI 1 : digital video and audio input
14. HDMI 2 : digital video and audio input
15. speaker output : internal speakers output connectors
16. earphone : earphone jack
17. AV2 IN : Composite video input (Side AV)
18. AV audio IN : AV2 and S-Video 2 side audio R/L(RCA jack)
19. S-Video 2 IN : S-video input (Side AV)
1
2
4
5
6
11
10
7
12
13
15
9
8
1
18
19
1617
PC Signal type
Analog Video : 0.7 Vp-p linear, positive polarity
Separate Sync. : TTL level, separate, positive or
negative polarity
Signal source : pattern generator format
Reference generator : Quantum Data 801GD, 802G
or 802R Pattern Generator
A. PC Audio input
Location: Rear down side
Specification
Audio L/R input