3605X/ 3604X/ 3601X Rechargeable Rechargeable Cordless Razor Razor Cordless
IMPORTANT SAFETY INSTRUCTIONS When using an electric razor, basic precautions should always be followed, including the following: Read all instructions before using this appliance. DANGER To reduce the risk of electric shock: 1. Do not reach for a razor that has fallen into water. Unplug immediately. 2. Do not use while bathing or in a shower. 3. Do not place or store razor where it can fall or be pulled into a tub or sink. Do not place or drop into water or other liquid. 4.
Table of Contents FEATURES 2-3 INDICATIONS 4 CHARGING 4 SHAVING 5 TRIMMING 6 CLEANING 6-9 ASSISTANCE 10 ACCESSORIES 10 BATTERY REMOVAL 10 WARRANTY Back Cover 60 - DAY MONEY-BACK GUARANTEE To enjoy the closest and most comfortable shave from your new Norelco Men’s Razor, the razor should be used exclusively for 3 weeks. This allows your hair and skin enough time to adapt to the Norelco Shaving System.
2. 3.
4. 5. SHAVING Use your new razor exclusively for 3 weeks to fully enjoy the closeness of a Norelco shave.* At first you may not get as close a shave as you expect, or your face may even become slightly irritated.This is normal since your beard and skin will need time to adjust. Invest 3 weeks and you'll soon experience the full joy of your new razor. * Stick with it! If you alternate shaving methods during the adjustment period, it may make it more difficult to adapt to the Norelco shaving system.
. 7. TRIMMING To groom sideburns and moustache: 4 Brush the inside of housing and Razor Head Assembly. 1 Turn razor ON. 5 Replace the Razor Head Assembly back on razor. 2 Push up Trimmer Slide Switch. 3 Hold Trimmer as shown and move in downward strokes with gentle pressure. Every Two Months: Razor Heads 1 Turn razor OFF and disconnect from outlet. 2 Remove Razor Head Assembly from housing unit. 4 Close Trimmer by sliding Trimmer switch down. 5 Turn razor OFF.
8. 9. 7 Slide and remove one cutter and head at a time to clean. • Be careful not to mix up cutters and heads.They are a matched set and if interchanged, it will greatly affect shaving performance. 14 Press down and turn the wheel clockwise until it locks into place. 8 Separate the cutter from the head. 15 Replace the Razor Head Assembly back on razor. 9 Only brush the cutter in an upward motion. Use the short bristled side of the brush. 10 Brush the slots of the razor head.
10. ASSISTANCE For assistance or the Authorized Norelco Service Location nearest you, call toll free: 1-800-243-3050 or visit our website: www.norelco.com Authorized Norelco Service Location information is available 24 hours a day, 7 days a week. ACCESSORIES Replacement Heads • Model HQ4 - For maximum razor performance, replace your Norelco Double Action razor heads once a year.
