B line 345B1 241B8 www.philips.
Table of Contents 1. Important �������������������������������������� 1 1.1 Safety precautions and maintenance ��������������������������������� 1 1.2 Notational Descriptions ������������ 3 1.3 Disposal of product and packing material ������������������������������������������ 3 2. Setting up the monitor �������������� 5 2.1 2.2 2.3 2.
1. Important discoloration and damage to the monitor. 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user’s manual before you use your monitor. It contains important information and notes regarding the operation of your monitor.
1. Important panel. When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the LCD panel. • Unplug the monitor if you are not going to use it for an extensive period of time. • Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your monitor. • your monitor unattended.
1. Important when the operating instructions given in this manual have been followed. 1.3 Disposal of product and packing material 1.2 Notational Descriptions Waste Electrical and Electronic Equipment-WEEE The following subsections describe notational conventions used in this document. Notes, Cautions and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings.
1. Important Taking back/Recycling Information for Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor 2. Setting up the monitor 2.1 Installation 1 Package contents B line 345B1 Quick Start Register your product and get support at www.philips.com/welcome 2. Hold the stand with both hands. (1) Gently attach the stand to the VESA mount area until the latch locks the stand.Gently attach the base to the stand. Monitor User’s Manual 使用产品前请阅读使用说明 Contents: User’s Manual Drivers n 保留备用 019 hin a. V ers io ©2 n Ko ink www.philips.com/welcome s N .V .
2. Setting up the monitor 3 Connecting to your PC 8 7 Fast Charger USB UP 10 9 6 1 1 5 4 3 2 step 2 2 USB UP step 1 Connect to PC 1 Kensington anti-theft lock 1. 2 Earphone jack 3 DisplayPort input Connect the power cord to the back of the monitor firmly. 2. Turn off your computer and unplug its power cable. 4 HDMI2 input 3. Connect the monitor signal cable to the video connector on the back of your computer. 5 HDMI1 input 6 USB upstream 7 USB downstream/USB fast charger 4.
2. Setting up the monitor 4 USB hub Note To comply with International energy standards, the USB hub/ports of this monitor are disabled during Sleep and Power Off modes. If you Turn OFF your monitor via the power switch at any given time, all the USB ports will power OFF. To permanently put the USB function in “ON” state, please go to OSD Menu, then select “USB standby mode”, and switch it to “ON” state.
2. Setting up the monitor 2 Customize your own “USER” key This hot key allows you to setup your favorite function key. 2.2 Operating the monitor Description of the control buttons 1 1. Press button on the front bezel to enter OSD Menu Screen. 3 7 6 5 4 2 2. Press ▲ or ▼ button to select main menu [OSD Settings], then press button.
2. Setting up the monitor 3 Description of the On Screen Display The OSD Menu What is On-Screen Display (OSD)? Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. On-Screen Display (OSD) is a feature in all Philips LCD displays. It allows an end user to adjust screen performance or select functions of the displays directly through an on-screen instruction window.
2. Setting up the monitor 4 Resolution notification 5 Physical Function This display is designed for optimal performance at its native resolution, 3440x1440@60Hz. When the display is powered on at a different resolution, an alert is displayed on screen: Use 3440x1440@60Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
2. Setting up the monitor 2. Press ▲ or ▼ button to select main menu [PIP / PBP], then press button. 2.3 MultiView 3. Press ▲ or ▼ button to select [PIP / PBP Mode], then press button. 4. Press ▲ or ▼ button to select [PIP] or [PBP]. 5. Now you can move backward to set the [PIP / PBP Input], [PIP Size], [PIP Position], or [Swap].
2. Setting up the monitor • Note The black strip shows on the top and the bottom of the screen for the correct aspect ratio when in the PBP mode. If you expect to see full screen side by side, adjust your devices resolutions as pop up attention resolution, you will able to see 2 devices source screen project to this display side by side without black strips. Note the analog signal is not support this full screen in PBP mode.
2. Setting up the monitor 2.4 Remove the Base Assembly for VESA Mounting Before you start disassembling the display base, please follow the instructions below to avoid any possible damage or injury. 1. Place the display face down on a smooth surface. Pay attention not to scratch or damage the screen. 2. While keeping the release button pressed, tilt the base and slide it out. 1 2 Note This display accepts a 100mm x 100mm VESA-Compliant mounting interface.
3. Image Optimization Office, Photo, Movie, Game, Economy, SmartUniformity and Off. 3. Image Optimization 3. The SmartImage on screen display will remain on screen for 5 seconds, or you can also press "OK" to make confirmation. There are multiple modes to select: EasyRead, Office, Photo, Movie, Game, Economy, LowBlue Mode, SmartUniformity and Off. 3.
3. Image Optimization • outstanding clarity in vibrant colors - all without artifacts and faded colors. • • • • • Off: No optimization by SmartImage. Note Philips LowBlue mode, mode 2 compliance with TUV Low Blue Light certification, you can have this mode by simply press the hotkey , then press ▲to select LowBlue Mode, see above SmartImage selection steps.
3. Image Optimization • AMD Radeon R7 260X • AMD Radeon R7 260 3.3 Adaptive Sync • Adaptive Sync • • • • • • • • • PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image. This is called “tearing.
4. HDR 4. HDR(345B1CR) HDR Settings in Windows10 system. Steps 1. Right click on the desk top, enter to Display settings. STEP 5 2. Select the display/monitor. 3. Adjust resolution to 3440x1440 4. Turn the “HDR and WCG” to on mode. 5. Adjust Brightness for SDR content. Note Windows10 edition is required; always upgrade to the most updated version. Below linkage is for the further more information from mircrosoft official website. https://support.microsoft.
5. Designs to prevent computer vision syndrome 3. Ideal working posture 5. Designs to prevent computer vision syndrome (CVS) • Reposition your screen to appropriate height and angle according to your height. 4. Choose Philips monitor for easy-oneyes. Philips monitor is designed to prevent eye strain caused by prolonged computer use. • Anti-glare screen: Anti-glare screen efficiently reduces annoying and distracting reflections that caused eye fatigue.
6. PowerSensor™ detection signal for distances up to 120 cm or 47 inches. (Setting 4) 6. PowerSensor™ • How does it work? • PowerSensor works on principle of transmission and reception of harmless “infrared” signals in order to detect user-presence. • When the user is in front of the monitor, the monitor operates normally, at the predetermined settings that the user has set- i.e.
6. PowerSensor™ it will automatically turn ON if monitor is returned to its default Landscape position. Note A manually selected PowerSensor mode will remain operational unless and until it is readjusted or the default mode is recalled. If you find that the PowerSensor is excessively sensitive to nearby motion for some reason, please adjust to a lower signal strength. Keep sensor lens clean, if the sensor lens is dirty, wipe it with alcohol to avoid reducing of distance detection .
7. Technical Specifications 7.
7.
7.
7. Technical Specifications Note lease notice that your display works P best at native resolution of 3440x1440 @ 60Hz. For best display quality, please follow this resolution recommendation. 7.1 Resolution & Preset Modes Maximum Resolution 3440x1440 @ 100 Hz (digital input) Recommended Resolution 3440x1440 @ 60 Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720x400 70.09 31.47 640x480 59.94 35.00 640x480 66.67 37.86 640x480 72.81 37.50 640x480 75.00 35.16 800x600 56.
8. Power Management 8. Power Management If you have VESA DPM compliance display card or software installed in your PC, the display can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the display will 'wake up' automatically.
9. Customer care and warranty together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 9. Customer care and warranty 9.1 Philips’ Flat Panel Displays Pixel Defect Policy Philips strives to deliver the highest quality products.
9. Customer care and warranty Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel). Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
9.
9. Customer care and warranty 9.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center. For Warranty Period please refer to Warranty Statement in Important Information Manual.
10. Troubleshooting & FAQs 10. Troubleshooting & FAQs • Check to see if the display cable has bent pins. • Make sure the computer is turned on. 10.1 Troubleshooting Visible signs of smoke or sparks This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
10. Troubleshooting & FAQs “after-image” or “ghost image” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. • In the Windows Start Menu, select Settings/Control Panel. In the Control Panel Window, select the Display icon. Inside the Display Control Panel, select the 'Settings' tab. Under the setting tab, in box labelled 'desktop area', move the sidebar to 3440x1440 pixels.
10. Troubleshooting & FAQs Q4: How do I adjust the resolution? enter color setting, there are three settings as below. 1. Color Temperature: Native, 5000K, 6500K, 7500K, 8200K, 9300K and 11500K. With settings in the 5000K range the panel appears "warm, with a redwhite color tone", while a 11500K temperature yields "cool, bluewhite toning". Ans.: Your video card/graphic driver and display together determine the available resolutions.
10. Troubleshooting & FAQs Q11: What is Image Sticking, or Image Burn-in, or After Image, or Ghost Image in LCD panels? hold the button while the monitor is off and then press button to turn the monitor on. Ans.: Uninterrupted display of still or static images over an extended period may cause "burn in", also known as "after-imaging" or "ghost imaging", on your screen. "Burn-in", "afterimaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology.
10. Troubleshooting & FAQs Ans: It’s because the sub-windows video source is interlace timing( i-timing), please change subwindow signal source to be progressive timing( P-timing).
2019 © TOP Victory Investment Ltd. All rights reserved. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.
