English About this handbook _ This is a handbook to help you with the installation and operation of your new menu TV, With a menu TV, menus can be called up on the screen. These menus provide information dither about operations to be carried out or about functions you can select. This handbook consists of two parts © Operation After you have stored the TV channels in the installation part, you can ¢all them up on the screen. You can adjust the picture and sound via the main menu.
Preparation Place the TV on a solid surface. For ventilation, leave a space of at least § om free all around the set. This TV requires a mains voltage of 220V 240 V. Insert the aerial plug tightly into the aerial socket ™1™ at the back of the TV with an aerial cable of good quality. CABLE = Insert the mains plug in the wall socket.
= . Switching TV on T GEEING vveviarsvvarsiesenss Press the switch (D on the front of your TV set. A green or red lamp lights up on the front of your TV set. OF fed orsmmcrnnsisnssnssis Installation The TV is switched on. The TV is switched an but the screen stays The screen lights up. dark. Your TV is on standby, @ Press a digit key on the remote control. & The green lamp lights up and blinks every time you press a key on the remote control. Pontoon. > The TV switches on. The screen lights up. Pontoon.
/1 -r cove Searching for and storing TV channels After you have switched on your TV and selected your menu languages, you can search for and store your TV channels. This can be done in two different ways : automatically or manually, or Autocratic installation Manual installation .c.cuauaramarosmnioas All TV channels are searched for and stored automatically.
step -t step C d 0 Installation Manual TV installation © Press the green key b in the menu TV INSTALLATION. MANUAL TV INSTALLATION ¥ The MANUAL TV INSTALLATION Menu appears. o om Rem . o = programmer 4 me stirs select:-x ad 03 menu off Selecting the TV system Television pictures are not broadcast in the same way in all countries. We speak of different television systems (PAL, SEAM, BACKLOG, SCENT. Now you must select the TV system yourself. | © Press the red key a.
a step gJ Entering the programmer number Now assign a number of your choice to the TV channel you have located. In this way you decide the order of all your TV channels. With the assigned programmer number you can call up your TV channel again later. o Press the yellow key ¢. . > Hold down the key or use the digit keys on the remote control until the desired programmer number appears in the menu. Go contested. c step L.
Entering or modifying a programmer name It is possible to change the name transmitted by the broadcaster or to assign a name to the TV channels which have not yet been entered. A name with a maximum of 5 letters or numbers can be given to the programmer numbers 0 to 99. For example SUPER, BBC, Press the yellow key ¢. The PROGRAMMER NAME menu and the programmer list appear, Also the frequency of the current TV channel is displayed.
ra Q Modifying the programmer list According to your preference you can modify the programmer list of the stored TV channels by swapping, deleting or inserting certain TV channels. @ Press the blue key d. © The PROGRAMMER SORT MENU appears. a. swap PROGRAMMER SORT With the swap-function you can modify the allocation of the stored Bi heme B e TV channels. Press the red key a. > FIRST SELECTION lights up.
./ Pres election preferences evolve Installation Ali the stored TV channels have automatically been placed into the programmer list. in the PRES ELECTION PREFERENCES men you should indicate for each stored TV channel if you want to keep that programmer number as a favorite. ‘You can also do this for a programmer number reserved for the TV INSTALLATION automatic manual programmer name programmer sort presentation preferences suave SERER selective weeny off programmers yous receive from your decoder.
10 Operation Every time you press a key an the remote control, the green lamp on the front of your TV set blinks. Switching TV on © Press (D on the front of your TV, B A green Jap lights up. PR appears briefly and possibly also the programmer name. & Does a red lamp light up ? Your TV is on standby. Read on. Standby With the standby key () at the top of the remote control you can temporarily switch the TV off, The red Jap on the TV lights up. Press a digit key in order to turn the TV on again.
continua The main menu is split into 2 menus and you can; . adjust picture and sound according to personal preference . call up a programmer list with an overview of the TV channels stored . select from among various special features . select recording sources for your video recorder . enter the system installation menu. © Press MENU. B The MAIN MENU 1 appears. © Press off to switch off each menu. Adjusting the picture Press MENU. Press the corresponding color key for PICTURE.
° o cove oY o ° cove v vyYovw Adjusting the sound Press MENU. SOUND Press the corresponding color key for soup. o The SOUND 1 menu appears. ¢ W table d m bass s Sweet s ream off Volume, balance, treble, bass Press one of the color keys to select the adjustment you want to SOUND ] change. 5w splotch The selected adjustment lights up. Z : Press MENU order to alter the selected adjustment. A e Press a color key again to select another adjustment.
oo o o Operation Sound mode Press the corresponding color key for SOUND MODE in the SOUND menu. SOUND MODE lights up. if the TV channel which you are now watching transmits stereo or digital sound and if your set is equipped with Ni cam, you can choose between : ~ stereo ar man if the TV channel transmits stereo sound digital or analogue if the TV channel transmits digital sound. Select analogue or mono in case of weak digital or stereo sound signals. Press MENU OF +.
Special features Press MENU. SPECIAL FEATURES 1 kid lock suppertime Press the corresponding color key for SPECIAL FEATURES, paresis The SPECIAL FEATURES 1 menu appears. Press a ca lour key in order to choose between child lock, steep timer, pp store, demonstration or pip size (for the sets with the picture in sweetmeat men off picture adaption. Your choice lights up. Press once more on a color key to make another choice.
Operation Recording Source if you want to record a programmer, then first read Peripherals, Re carding, p, 27, System Installation You tan also enter the System Installation menu via the Main Menu 2 to select your menu language and to locate and to store your TV channels. © Press MENU. © Press the corresponding color key for SYSTEM INSTALLATION. # The SYSTEM INSTALLATION menu appears on the screen. © Now follow very closely and step by step the instructions as described on page 3 and following.
Other functions . pep ggo: % Movie compress Movies and other new programmed in the future are broadcast in the Wide Noreen format. D-MAC satellite programmed in the Wide Screen format recorded on 2 video recorder or prerecorded Wide Screen tapes can be reproduced on a normal TV serene in a conventional picture format. Open the door of the remote control. Press {3, The picture is compressed. There are black bars at the top and bottom of the screen. Press §08 again to switch off movie compress.
e o groovy PP key With the green PP-key you can call up the picture and sound adjustments which have been stored with the PP store in the Special Features menu, p. 14, Open the door of the remote control. Press PP, Information on screen After the selection of a TV channel the following information appears briefly on your screen : « the programmer number and name of the selected TV channel DIGITAL SOUND Available if the TV-channel transmits digital sound .
18 Pip Picture in Picture ™ 0o Switching pip on and off Open the door of the remote control. Press (M. v oo screen, For TV sets with the Picture in Picture option. With pip, picture in picture, you san call up a little screen within the main TV screen. Thus at the same time you can watch a programmer from other equipment, connected with a revocable, The picture in the small screen has no sound.
Switching screens © Press (3, & The main screen and the pip serene exchange places. If the TV channel is only in the pip screen and not in the main screen, then use the pip keys in order to change your TV channel in the pip screen. Still Picture Press (8. & The picture in the pip screen stands still.
Teletext Most TV channels broadcast information via teletext. Each channel which broadcasts teletext transmits a page with information on how to use its teletext system. Look for the teletext page with the index {usually page 100}, TV programmed are sometimes subtitled for the hard of hearing. Depending on the TV channel, teletext is transmitted in different systems: W8T, ~ TOP, FLOG. The system utilized can be recognized by the options line at the bottom of the screen.
o Operation Selecting a Teletext Page With the digit keys -.OF With the options line... Enter the desired page number with the © Select with the color keys, corresponding digit keys. to the loured options at the bottom of the The page counter seeks the page or the page appears immediately when the page number has been stored in the memory. A message appears when you have entered B> pages a not existing or an incorrect page number.
Special teletext functions Open the door of the remote control. Hals You can stop the page counter from seeking when you have entered 8 wrong page number ot when the page is not available. Press &3, S appears in the first information line. The page counter stops seeking the entered page number. Enter another page number. B disappears. Reveal Some pages contain concealed information, such as solutions to riddles and puzzles. Press ? to call up concealed information.
° ‘ Peripheral —Equipment Peripheral Equipment There is a wide range of electronic equipment that can be connected to your TV, The following connection diagrams show you where the different equipment should be connected at the back or the front of the TV, TV and video recorder Connect the aerial cables 1 and 2 as shown opposite, Butler picture quality can be obtained if you also connect a euro cable 3. S-VHS video recorder Do you have a $-VHS video recorder with S-VHS .
video recorder 1 and one or more peripherals Connect the aerial cables 1, 2 and 3 as shown alongside. Lefter picture quality can be obtained if you also connect educable 4 to EXTERNAL 1 or 3 and euro cable 5 to EXTERNAL, Look for the test signal of your peripheral in the same way as you do for a video recorder. [f you have more peripherals, they can also be connected to each other with an extra aerial cable 6 and an additional euro cable 7.
Peripheral Equipment Headphone I . Insert the plug into the headphone socket §} at the QED front of the TV. : Press 8% on the remote control. Adjust the volume with The internal loudspeakers of your TV are switched off. The headphone socket has an impedance of between & and 4000 Ohm and is of the 6.3 mm jack type. Decoders Cable TV offers you a wide choice of programmed. Most of them are free, others are o be paid for by the viewer.
26 Reproducing Picture and Sound T 808 /@ a. from equipment connected only with an aerial cable © Switch your TV on, o With the digit keys select the programmer number under which you have stored the test signal. o Switch on your equipment. {See the handbook for your equipment.) & The picture and/or sound is reproduced. if you want to watch TV again o Enter the programmer number of the TV channel which you want to watch with the digit keys. b.from equipment connected with a euro cable o Switch your TV on.
o convoy Recording with your video recorder Recording a TV programmer only using an aerial cable Select the programmer number on your video recorder, Set your video recorder te record. {See the handbook for your video recorder.) using 8 revocable connected to the BUFCCONNBCIGT EXTERNAL 2 Select the programmer number on the TV. Peripheral Equipment using a euro cable connected to the euro connector EXTERNAL 1 < Select the programmer number on the TV, Press MENU. . < Set your video recorder to record.
28 53 ° Operating the video recorder with the TV remote control Most of the audio and video equipment from our range of products can be operated with the remote control. Keep the VCR key pressed and press one of the video recorder keys of the remote control at the same time. VCR + » for play VCR + @ for record VCR + M for stop.
Tips Paar Picture Have you selected the correct TV stern ? is your TV set or house aerial located too close to audio equipment or neon lights, ete. ? Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the outside aerial. is the picture or is the teletext unrecognizable 7 Check if you have entered the correct frequency or adjust the frequency by fine tuning. See Installation, n.
30 Index child dock. color. connections contrast. decoder. delete demonstration digital... connectors fine tuning ., frequency. headphone. info on screen, insert... installation menu main menu manual mono, movie compress... permanent programmer number. personal preference key personal preferences. pip picture in picture oo pres election preferences programmer Programmer Name programmer sort recording recording rouse: S-VHS. searching for TV channels. selecting TV system sharpness sleep timer. sound...
