Specifications

3
TPS1.1L LA
1. Technical Specifications,Connections,and Chassis Overview
1.3 Chassis Overview
D-sub Pin assignment
PIN
No.
SINGNAL
PIN
No.
SINGNAL
1 Red video input 9 DDC +5V
2 Green video input /SOG 10 Logic ground
3 Blue video input 11 GND
4 GND 12 Serial data line (SDA)
5 GND- cable detect 13 H. Sync / H+V
6 Red video ground 14 V. Sync
7 Green video ground 15 Data clock line (SCL)
8 Blue video ground
S-Video with S terminal (Video, Audio input) Specification
Video - Y : 1Vpp , C : 300 mV pp
-Impedance : 75W
Audio L/R input (share with Composite Audio input)
Nominal : 0.5 V rms.
Maximum : 1.5 V rms. Impedance > 10 kW
Note : the input will be overloaded when the signal > 1.5 V rms.
Support : PAL, NTSC and SECAM colour system
Composite with S terminal (Video, Audio input) Specification
Video - : 700mV Video, 300 mV -Sync
Impedance : 75W
Audio L/R input (share with Composite Audio input)
- Nominal : 0.5 V rms.
Maximum : 1.5 V rms, Impedance > 10 kW
Note : the input will be overloaded when the signal > 1.5 V rms.
Support : PAL, NTSC and SECAM colour system
Key board
Power board
P
K
S
Scaler board
IR board
SideAV board
IR
AV
AV
No. 1
No. 2
No. 19
No. 18
Type A Connector
PIN
No.
SIGNAL
1 TMDS Data2+
2 TMDS Data2 shield
3 TDMS Data2-
4 TMDS Data1+
5 TMDS Data1 shield
6 TMDS Data1-
7 TMDS Data0+
8 TMDS Data0 shield
9 TMDS Data0-
10 TMDS Clock+
11 TMDS Clock Shield
12 TMDS Clock-
13 CEC
14 Reserved (N.C. on device)
15 SCL
16 SDA
17 DDC/CEC Ground
18 +5V Power
19 Hot Plug Detect
TV video input /output connectors
A. HDMI for digital Video / Audio interface with pin assignment
as follows: