Specifications

12
TPS1.1L LA
5. Service Modes, Error Codes and Fault Finding
5.2 Factory Mode
It can enter Factory Mode
1. Press" Menu in normal operation mode to enter OSD.
2. Press "062596+Menu on the button (RC) remote control in OSD.
3. The screen will appear "FAC" in the bottom, choose it and press the right key.
"
"
"
"
OSD behavior:
Before press number key change OSD item
Now remove previous function, press number key then press OK will change value
Item Description Range method of operation
//Action Items
0ExitFactory press OK.
1 AutoColor
PC: any pattern has black and white
YPbPr:SMPTEbar(color bar), any timing.
press OK. when autocolor, the OSD disappear, when
finished. OSD appear.
//Switch Items
2PowerOn On/Off
3 AGING MODE turn<On> and no signal input On/Off
//ADC Gain & Offset
(values different by VGA and YPbPr)
AutoColor changes those items
4 ADC_GAIN_R 0~255 Press Left and Right to change value
5 ADC_GAIN_G 0~255
6 ADC_GAIN_B 0~255
7 ADC_OFFSET_R 0~127
8 ADC_OFFSET_G 0~127
9 ADC_OFFSET_B 0~127
//Color Temperature (values different by AV,VGA,DTV,YPbPr)
10 CLR_TEMP_R Back-End Scaler R G B Gain 0~255 Press Left and Right to change value
11 CLR_TEMP_G 0~255
12 CLR_TEMP_B 0~255
//Tuner & Panel Id
13 EEPROM ID value different by type
The below pictures is for your reference:
Step1: press MENU+062596 in user mode.
Step2: choose F3 98 V1.77.74.3,press the right key, then
enter the factory mode.
The factory content: