Specifications

11
TPS1.1L LA
5. Service Modes, Error Codes and Fault Finding
5. Service Modes, Error Codes and Fault Finding
index of this chapter:
5.1 CSM
5.2 Factory Mode
5.
3 Repair Flow Chart
About error code,Please refer to the table below.
Error code Event
0x01 DDR error
0x02 IIC bus error
0x03 Tuner error
0x04 Demod error
5.1 CSM
It can display CSM windows message when press Menu+123654 on the button (RC) remote control in normal operation mode.
Then choose The following information is displayed on screen:
CSM Item Contents Remark
1: Set Type 32TA2800/55 Project name
2: Production code 01234567890123 14 digit production-code(serial number)
3: SW-naming main-
processor MST96889LD-LF SW-naming of Mstar/Trident
4: Code 1 0 0 0 0 0 Error codes in NVM/EEPROM (5 last logged errors)
5: Code 2 0 0 0 0 0 Error codes in NVM/EEPROM (5 first logged errors)
6: Key (HDCP) Enabled HDMI information whether HDCP-key is valid
7: NVM-naming 24C32-Without-BDS Contents per display-type
The real picture as below:
55