Specifications

Assign Externals 69
200 Plus Series Console
Unlocking the Console
To unlock the console:
1) Press
MENU or RECORD. The LCD display will appear as shown in Figure 82.
Figure 82: Memory Unlock - LCD Display
2) Use
SOFTKEY A "Unlock Memory". You will be prompted to enter your password (See “Change
Password” on page 67 for more information).
3) Once you have successfully entered your password the console will be unlocked.
14. Assign Externals
There are two keys EXT 1 and EXT 2 that can have remote DMX512 devices like smoke/fog/haze machines, strobes,
etc., assigned to them. This is done as part of the normal patch process.
This function allows you to set the keys as
Momentary or Latch.
•
Momentary will output the DMX as long as the key is pressed.
•
Latch will turn the device on and leave it on until the key is pressed again.
This function is on the fourth page of the menu screens.
To access Assign Externals:
1) Press MENU.
2) Press SOFTKEY D "Next" four times.
3) Press SOFTKEY A "Assign EXT".
Assign External Options:
• You can now use SOFTKEY A to toggle EXT 1 between Momentary and Latch.
• You can now use SOFTKEY B to toggle EXT 2 between Momentary and Latch.
15. Software Version
This will show you which version of software the console is currently running.
To determine what version software the console is using:
1) Press
MENU.
2) Press
SOFTKEY D "Next" four times.
3) The software version will be shown next to
SOFTKEY B.
Menu
Release
DMX Base
FX
A
B
C
D
Unlock
Memory
Exit
Memory Locked
GM xxx
Memory Lock