Specifications

LCD Settings 57
200 Plus Series Console
• To exit without saving the changes press MENU.
DMX Patch (Associate an Address with a Channel)
This function allows you to associate a DMX address with a channel.
Use
SOFTKEY B "DMX Patch" to select the function. The LCD display will appear as shown in Figure 63.
Figure 63: DMX Patch (Associate an Address with a Channel) - LCD Display
•Use
SOFTKEY A "UP" and SOFTKEY B "Down" to raise or lower the value of the selected field.
•Use
SOFTKEY C ">" to move between the DMX and Channel fields.
•Use
SOFTKEY D "Enter" to save any changes you have made.
•Use
MENU to exit without saving any changes you have made.
• It is possible to rapidly change the value of a field by using the
FLASH LEVEL fader.
Default
This function will restore the DMX patch to a 1 to 1 basis. Channel Fader 1 will control DMX 1; Channel Fader 2
will control DMX 2 etc.
•Use
SOFTKEY C "Default" to enter this function.
• Set the default patch by using
SOFTKEY A "Yes" or exit without changing back to the default patch by using
SOFTKEY C "No".
2. LCD Settings
This allows you to set the brightness and contrast of the LCD Screen on the console.
• Access by using
SOFTKEY C "LCDSet".
•Use
SOFTKEY A "UP" or SOFTKEY B "Down" to change the setting.
•Use
SOFTKEY C ">" to switch between the Contrast and Backlight functions.
•Use
SOFTKEY D "Enter" to save the settings.
3. Updating Console Software
This function is available on the second page of the Setup Menus. You also need to insert the USB with the software
on it into the console.
You will need to insert the Password you have set for the console using the
FX Keys to enter the number. Use
SOFTKEY D "Enter" to input the password.
To access console software update:
1) Press
MENU key.
2) Press
SOFTKEY D "Next".
3) Press
SOFTKEY A "Update SW".
Menu
Release
DMX Base
FX
A
B
C
D
UP
Enter
Patch By Dimmer
D: >001 C: 01
Master: xxx
address Patch
Down
>