Specifications

FX Programming Tools 51

200 Plus Series Console

Copying a Scene

It is possible to copy a scene from one scene to another in an FX stack.

1) To access this function press

RECORD and then the FX you wish to work with. The FX button will flash

blue.

2) Select the scene you wish to copy by holding down the flash button associated with it. The LCD screen will

appear as shown in Figure 53.

Figure 53: Copying a Scene - LCD Display

3) Press

SOFTKEY A "Copy To".

4) Now press the flash button where you wish to copy the scene to.

5) Use

SOFTKEY.

6) Exit by pressing

SOFTKEY C "Record FXBase" to update the FX stack.

Note: This is a useful tool if you wish to use a look you have previously created in a new cue.

Inserting a Cue

It is possible to insert a scene into an FX stack provided you have not used all the scenes available for the FX

stack.

1) To access this function press

RECORD and then the FX where you wish to work. The FX button will flash

blue.

2) Select the scene where you wish to insert a scene by holding down the flash button associated with it. The

LCD screen will display as shown in Figure 54.

Figure 54: Inserting a Cue - LCD Display

3) Press

SOFTKEY B "Insert".

4) The scene will move up 1 leaving you a blank scene you can add a look to.

Release

DMX Base

Copy

Cover

Master: xxx

Record FXBase

Insert

Delete