Specifications

Operations Manual
44 CONSOLE ADVANCED OPERATION
• SOFTKEY D "Run!" will start the rainbow.
• To change the number of colors, the color size or the speed
SOFTKEY A "Item Set" allows you to select the rele-
vant field. The FX keys can then be used to enter a value of between 1 and 10 for the Color Number or size. The
Speed can be set using the
STEP RATE fader.
• Once you have started the Rainbow running
SOFTKEY D "Stop!" will halt the Rainbow.
•
Softkey C "Color Set" allows you to set the colors that you want to use in the Rainbow.
To set the colors in Rainbow:
1) Press
Softkey C.
2) You can now use the Red, Green and Blue faders to set the level required or you can select from the pre-
recorded colors stored on the console. Refer to Figure 49.
Figure 49: Setting Colors in Rainbow - LCD Display
3)
SOFTKEYS A, B and C can be used to navigate through the 57 predefined colors.
4)
SOFTKEY D "Enter" is used to select a color for use in the Rainbow. You can store up to 10 Colors for use
in the Rainbow.
It is possible to store the Rainbow into a Scene or a Chase as follows:
1) To access
RECORD you will need to use the MENU key to return to the main LCD menu screen.
2) Press
RECORD.
3) Press the flash button for the fader in which you want to store the Rainbow effect.
4) Press the Flash button a second time to store the Scene. (The LCD will show a scene has been recorded)
5) Press
RECORD to store the effect.
6) You will need to use
SOFTKEY C "Shape", SOFTKEY A "Rainbow" and then SOFTKEY D "Stop!" to
halt the Rainbow effect.
7) It is now possible to play back the Rainbow effect by raising the fader in which you have stored it.
The other color effects work in the same manner.
KnightRider
This effect will use two colors only. It will run from Fixture 1 through Fixture 24 (Fixtures 1 to 12 on the 12/24
version). Each fixture will change color in sequence. Once all the fixtures have changed color the effect will run in
the opposite direction.
Chase
This effect will use two colors only. The Color Size setting will set the spacing for the chase steps. Setting Color Size
to 1 means all the odd fixtures will be the first color and all the even fixtures will be the second color.
The best way to understand the effects is to apply them to your LEDs and play with the settings.
Menu
Release
DMX Base
FX
A
B
C
D
Back
Enter
1 : Aqua
2 : Aqua Marine
3 : Bastard Amber
ColorLib [01]
R255 G000 B000
Master : XXX
Color Select
Next
More