Specifications
LED Mode 43
200 Plus Series Console
Recording Groups
To record a Group, follow this sequence:
1) Select the LEDs you want put it into the group using the fixture select buttons.
2) Press
MENU button, then Press SOFTKEY C "Record Group".
3) The
Flash Buttons 1~24 (1-12 on the 12/24 version) will flash blue to indicate that no groups are stored in
a button. If any button is not lit, it means there is a group already stored in it.
4) Press the flash button where you wish to store the group.
5) When you have stored the group press the
MENU key to leave the record group function.
Note: It is possible to overwrite groups if you desire.
Selecting a Group
To select a group while in LED mode use
SOFTKEY B "Recall Group". Buttons 1 to 24 (1 to 12 on the 12/24
version) will now be the group select keys. If a button is lit blue it means there is a group stored in it.
Press the button associated with the group you wish to select. The LEDs stored in that group are selected and the
relevant Fixture buttons are lit.
Note: If you decide you do not wish to select a group press the SOFTKEY B again and this will exit Group select.
Shape
The console comes with some built in color effects for LEDs. To access these you need to press
SOFTKEY C
"Shape"
on the LCD Screen.
Once you access the Shape function you can select a
Rainbow, Knight Rider or Chase.
Rainbow
A Rainbow effect can be used to change colors across all the LEDs on the console. It is possible to define the colors
to be used and the transition steps between each color. The speed of the transition can also be set.
To program a Rainbow:
1) Select
SOFTKEY C "Shape".
2) Select
SOFTKEY A "Rainbow".
3) The LCD display will appear as shown in Figure 48.
Figure 48: Rainbow Shape Selection - LCD Display
• You can adjust the number of colors in the Rainbow; in Figure 48 example, 2 colors have been selected.
• You can adjust the number of transitions between each color. In the above example there will be one step.
• The speed is the rate at which the transitions will happen.
• Direction can be set so that the Rainbow will run from the left or from the right using
SOFTKEY B.
Menu
Release
DMX Base
FX
A
B
C
D
Item
Set
Run!
1 : ColorNumb [02]
2 : ColorSize [01]
3 : Speed : 1.00
4 : Direct : Left
Master : XXX
Led Shape
DirBy
Set
Color
Set