Specifications

Operations Manual
36 CONSOLE ADVANCED OPERATION
Note: To unlock the console either press the MENU or RECORD keys. This will prompt you to enter the password
and unlock the console.
2. LED Mode
It is possible to control up to 12 LEDs on the 12/24 console and 24 LEDs on the 24/48 console.
A maximum of 20 Playbacks (8 Playbacks on the 12/24 version) can be recorded. Each playback can have a
maximum of 99 steps. Each step can have an individual fade time and wait time.
It is also possible to combine LEDs with Moving Lights and with generic fader channels and save these into the FX
stacks.
Setting up LED Lights
Before using LEDs they need to be set up on the console.
Press the
LED button to enter LED mode. The button will change to Blue to show it is selected.
Press the
MENU SOFTKEY. It will be lit red to show menu is selected. The LCD screen will show the options
available for the setting up of LEDs Lights.
Figure 38: LED Menu Options - LCD Display
The first function we will consider is Channel SetUp.
Channel SetUp
Used to set the range of DMX channels for use with Dimmers, LEDs and MLs.
•
SOFTKEY A "UP" will raise the value
•
SOFTKEY B "Down" will lower the value
•
SOFTKEY C ">" is used to navigate between fields.
• To rapidly change values, hold down the Softkey or use the
SOLO fader to change the values extremely quickly.
Menu
Release
DMX Base
FX
A
B
C
D
LED
Patch
Next.
:
Master: xxx
Led Menu Mode
Channel
SetUp
Record
Group
Menu
Release
DMX Base
FX
A
B
C
D
UP
Enter
Start End
Dim:>001 052
LED: 053 153
ML: 154 512
Master: xxx
Channel Set Up
Down
>