Specifications

Operations Manual

32 CONSOLE ADVANCED OPERATION

Recording Groups

To record a Group follow this sequence:

1) Select the fixture you want put it into the group using the fixture select buttons.

2) Press

MENU button, then Press SOFTKEY C "Record Group".

3) The

Flash Buttons 1~24 (1-12 on the 12/24 version) will flash blue to indicate that no groups is stored in

that button. If the button is not lit it means there is a group already stored in it.

4) Press the flash button where you wish to store the group.

5) When you have stored the group press the

MENU key to leave the record group function.

Note: It is possible to overwrite groups if you desire.

Selecting a Group

To select a group while in ML mode use

SOFTKEY B "Recall Group". Buttons 1 to 24 (1 to 12 on the 12/24

version) will now be the group select keys. If a button is lit blue it means there is a group stored in it.

Press the button associated with the group you wish to select. The moving lights are selected and the relevant Fixture

select button(s) are lit.

If you decide you do not wish to select a group press the

SOFTKEY B again and this will exit Group select.

Focus

This function allows commonly used colors, gobos and positions to be stored as part of the Moving Lights fixture

library. It makes recalling a predefined color a simple task.

There are 10 Master Focus Groups. Each group can have up to 10 palettes associated with it. To access the Focus

function while in moving light mode, press

SOFTKEY A. You will then have a list of the Focus Master Groups as per

the LCD display as shown in Figure 34.

Figure 34: Focus - LCD Display

Release

DMX Base

01.

Color

More.

Pan: 127

Tilt: 127

Color: Open

Dimmer: 255

Gobo: Open

PL: 01 S000 T000

ML Palette

02.

Shutter

03.

Gobo