Specifications

Operations Manual
14 CONSOLE BASIC OPERATION
Example:
1) Make sure that the PRESET A MASTER and PRESET B MASTER faders are at the top.
2) Set PRESET A faders 1, 2 and 3 to 100%. (as you move these faders to 100% you will see the intensities of
these channels turn on)
3) Set PRESET B faders 10, 11, 12 to 100%. You will see no change in these channels intensities in real time.
4) Move the PRESET A MASTER and PRESET B MASTER fader to the bottom.
Note: As the PRESET MASTERS move to the bottom the intensity on channels 1,2 and 3 will fade to 0% and the
intensity on channels 10, 11 and 12 will fade to 100%.
Congratulations! You have just run your first lighting cue.
Timed Operation
Manual Fades
Use the PRESET A faders to set a scene. On the PRESET B faders set a different scene. Set the PRESET A
MASTER to full and the PRESET B MASTER to zero. This will output the channels set on the PRESET A faders.
To crossfade to the scene on PRESET B move the PRESET A MASTER to zero and the PRESET B MASTER to
full at the same time. The speed with which you move the master faders will control the time taken for the transition
between PRESET A and PRESET B. As the two master faders are moved the scene on the PRESET A faders will
fade out and the scene on the PRESET B faders will fade in.
A new scene can now be set up on the PRESET A faders without affecting the live outputs. To crossfade to the new
scene on PRESET A, move the PRESET A MASTER to full and the PRESET B MASTER to zero. As the two
master faders are moved the currently outputting scene set up on PRESET B faders will fade out and the scene set on
PRESET A faders will fade in.
Timed Fades
It is possible to set a fade time between scenes by using the STEP RATE fader. Make sure the FD/ST TIME button
is red by pressing the button as needed. When red, this indicates that the STEP RATE fader is in time mode. To apply
the time press the A and C soft buttons on the right of the LCD, the text will invert its colors to show the selection has
occurred. This will apply the time on the STEP RATE FADER to the PRESET A and PRESET B faders. Set the
time to the desired level. When you move the PRESET A and PRESET B faders the time will now be applied to the
transition. The LCD will show the time in the bottom Left window.
Figure 10: Timed Fades - LCD Display
The example below will show you how to set and apply Time to the Preset Master moves.
Example:
1) Make sure that the PRESET A MASTER and PRESET B MASTER faders are at the top.
2) Set PRESET A faders 1, 2 and 3 to 100%. (as you move these faders to 100% you will see the intensities of
these channels come on)