Specifications

Operations Manual

10 INTRODUCTION

Step 2. Connect DC connector from power supply to DC IN on console.

Figure 5: 200 Plus Series Control Console Power Connection

Step 3. Connect power supply to AC supply source.

Step 4. Turn on console at Console On / Off Switch.

Note: You must connect the console to the lighting system via DMX512 before it is capable of providing control. See

"Connecting DMX512" on page 10 for more information.

Connecting DMX512

The console provides two standard, female XLR 5-pin connector for connecting to DMX512 devices. DMX512 is for

outputting to a universe of DMX devices for your primary output. This can include dimmers, LEDs, and moving

lights. The port labeled DMX BASE is for outputting to a universe of LED devices. For more information on DMX

BASE, refer to "DMX Base" on page 7.

Figure 6: 200 Plus Series Control Console DMX512 Connection

Note: For more information on DMX512, refer to "Additional Resources for DMX512" on page 1.

200 Plus Series Console Rear Panel

9 to 12 Volts DC

0.5 Amps (min.)

Power Input

Connector Pinout

Console On / Off Switch

Power Input Connector

200 Plus Series Console Rear Panel

DMX512

Connectors Pinout

Pin Signal

1 Ground

2Data -

3Data +

4 No Connection

5 No Connection

DMX512 Input

NOTES:

(1) DMX BASE is an advanced DMX512 port for the DMX BASE feature in the console. Please see

"Update DMX Base" on

page 58

for details.

(2) The DMX512 connection is the primary DMX512 port.

DMX BASE

(1)

DMX512

(2)