Register your product and get support at www.philips.
1 Caution 2 2 Important 3 Safety 3 3 Your TV 5 Remote Control 5 Remote control usage 6 4 Use your TV 7 Switch TV on or off 7 Switch channels 7 Adjust TV volume 8 5 Other uses of the TV 9 Accessing the TV menu 9 Change the picture and sound setup 9 Adjusting setup 10 Use timer 11 Adjusting VGA Setup 12 Playing media from USB devices 12 Updating the TV software 13 Restoring the factory setup 14 7 TV connections 16 Rear connections 16 Side connections 17 Connecting to a computer
1 Caution 2014© TP Vision Europe B.V. All rights reserved. Specifcations are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V or their respective owners. TP Vision Europe B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
Risk of overheating! • Never install the TV in a confined space. Always leave a space of at least 4 inches or 10 cm around the TV for ventilation. Ensure curtains or other objects never cover the ventilation slots on the TV. Risk of injury, fire or power cord damage! • Never place the TV or any objects on the power cord. • Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable.
3 Your TV Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your TV at www.philips.com/welcome. E n g l i sh Remote Control  Control Panel 3 2 1 4 5 a Volume-: Without the key menu, the volume-down function is available. b Volume+: Without the key menu, the volume-up function is available.
e (Home) Access or exit from the main menu and return to the previous menu. f INFO Display information about current activity. g (Navigation buttons) Navigate through menus and select items. h OK Confirm an entry or selection. i OPTIONS Access options for channels in the TV mode. j (Back) Return to the previous menu or exit from a certain function , and switch to the previous channel or signal source.
Switch channels E n g l i sh 4 Use your TV This section helps you perform basic TV operations. 3 2 1 Switch TV on or off 5 4  Standby indicator •  • • Press CH +/- on the remote control or the lower right part of the TV. Enter a channel number using the numeric buttons on the remote control. Press on the remote control to switch and return to the previous channel. View installed channel To switch on • Plug in the power plug.
Watch connected devices Adjust TV volume Note 3 •• Switch on the device before selecting it as an external signal source. 2 1 4 5 Use the Source button   1 2 3 8 Press SOURCE. »» The source list appears. Press to select a device. Press OK to select. »» The TV switches to the selected device. EN To increase or decrease volume • Press VOL +/-at the lower right part of the TV or the Volume Control+/- on the remote control. To mute or unmute sound • Press (Mute).
Adjusting the picture setup 1 2 • Accessing the TV menu The menu can help you to set up channels, change the picture and sound setup, and access other functions. 1 Press (Home) . »» Display menu screen. TV TV Guide VGA HDMI1 USB 2 3 4 5 AV HDMI2 Component HDMI3 Setup Select [Setup]. Press Choose from the following options: • [Picture] / [Sound] / [TV] (available only in TV mode) / [Settings] / [Parental] / [VGA Setting] (available only in PC mode) / [EasyLink].
• • [Dynamic Contrast]: Sets the contrast to maximum. (There are no advanced contrast functions in PC mode.) [Dynamic Backlight]: The contrast level will change with the brightness of the image. Adjusting the sound setup 1 2 10 Press ADJUST and select [Sound]. »» Displays the [Sound]menu. Press Select and adjust the setup: • [Smart Sound]: • [Standard]: Gives balanced, outstanding sound performance in the treble, mid and bass ranges.
1 2 1 2 Press Press to ADJUST and select [Settings]. select [Picture Format]. Use timer E n g l i sh Changing picture format You can set the timer to switch the TV to standby mode at a set time. Select a picture format. Tip Press OK to confirm. •• Before using the timer, please set the sleep timer. Summary of picture formats Configuration of the picture setup listed below.
4 Repeat this step to lock or unlock multiple channels. • [Channel Lock]: When channels are locked: • You need to enter the four digit password to enter the channel blocking menu. • You need to enter the four digit password to watch locked channels. • You need to enter the four digit password to enter the parental menu. • [Clear All]: This function will clear all the locked channels and signal sources that you have previously saved. • The default password is “0000”.
Watching video 1 1 2 Select a photo or folder, then press OK. The photo will be enlarged to fill the screen. »» The slide show starts playing from the selected photo. Press the following buttons to control photo playback: • or : Play or pause • CH- or CH+: See the last photo or the next photo. Changing slide show playback setup When you want to start playing a slide show, press (Home) and select one of the following options, then press OK. • [Repeat]: Set the playback mode.
Restoring the factory setup You can restore your TV’s default picture and sound setup. Saved channel setup will not be affected. 1 2 3 14 Press Press to ADJUST. Select [Settings] > [Reset]. Select [Confirm] and press OK. If you want to cancel, please select [Cancel] and press OK.
3 This chapter explains how to reconfigure and fine-tune channels. Swapping channels Setting up channels automatically Automatically finds and saves channels. 1 2 3 Press ADJUST. Press Select [TV] > [Channels] > [Channel Scan]. Press OK. »» The TV will automatically start searching for channels. Updating channels 1 2 3 Press ADJUST. Press Select [TV] > [Channels] > [Update Scan]. Press OK. »» The TV will start to update the channels.
7 TV connections b AV input This chapter explains how to connect devices with different interfaces. Video L Pr L R Note •• You can use different connection types to connect devices to the TV. Rear connections a Component signal input Audio and video input from DVD players, game consoles and other analog or digital devices Y / AV Pb R c Antenna/ cable TV Input for an antenna, cable or satellite signal.
c USB Data input from a USB storage device. E n g l i sh e SPDIF Transmit sound to digital audio signal, then connected audio device can play digital audio sound. USB SPDIF  Side connections a Headphones q Stereo sound output for headphones. Note •• The TV speakers will automatically be muted when headphones are plugged in.
Connecting to a computer • Before connecting the computer to the TV: • Set the computer screen refresh rate to 60Hz. • Select a supported resolution on the computer. Connect to the computer using one of the following connections:  HDMI cable and HDMI-DVI adapter AUDIO Notes •• A separate audio cable is required when connecting with DVI or VGA.
Make full use of your Philips EasyLink HDMICEC-compatible device to improve the control features and obtain the maximum benefit. HDMI-CEC-compatible devices connected with an HDMI connection can be controlled using the TV remote control. If you want to turn Philips EasyLink on, you must: • Connect two or more HDMI-CECcompatible devices using HDMI connections. • Confirm that each HDMI-CEC-compatible device is operating normally. • Switch to EasyLink.
8 Product information Product information is subject to change without notice. For detailed product information, please visit www.philips.com/support. Display resolutions Computer Formats • Resolution - refresh rate: • 640 x 480 - 60Hz • 800 x 600 - 60Hz • 1024 x 768 - 60Hz • 1360 x 768 - 60Hz • 1920 x 1080 - 60Hz (Not supported on 32-inch TVs) Video Formats • Resolution - refresh rate: • 480i - 60Hz • 480p - 60Hz • 576i - 50Hz • 576p - 50Hz • 720p - 50Hz, 60Hz • 1080i - 50Hz, 60Hz • 1080p - 50Hz, 60Hz.
E n g l i sh Supported TV mounts To mount the TV, please purchase a Philips TV mount or any TV mount compliant with the VESA standard. To prevent damage to cables and connectors, be sure to leave a clearance gap of at least 2.2 inches or 5.5cm between the back of the TV to the wall. Warning •• Please follow all instructions provided with the TV mount. TP Vision Europe B.V. bears no responsibility for improper TV mounting that results in accident, injury or damage. Model No.
9 Troubleshooting This section covers common problems and their accompanying solutions. General issues The TV cannot be switched on: •• Disconnect the power cable from the power outlet. Wait for one minute before reconnecting it. •• Check that the power cable is securely connected. The remote control is not working properly: •• Check that the remote control batteries are correctly inserted according to the +/orientation. •• Replace the remote control batteries if they are flat or weak.
HDMI connection issues There are problems with HDMI devices: •• Please note that HDCP (High-bandwidth Digital Content Protection) support can delay the time taken for a TV to display content from a HDMI device. •• If the TV does not recognise the HDMI device and no picture is displayed, please try switching the signal source to another device before switching it back again. •• If there are intermittent sound disruptions, please check that output settings from the HDMI device are correct.
Environmental Protection Use Period This logo labelled on the product itself indicates that the Environmental Protection Use Period thereof is 10 years. The Environmental Protection Use Period of electrical information products refers to the time period during which the toxic and hazardous substances or elements contained within the product will not leak or suddenly spoil, and users of such products will not cause any serious environmental pollution or serious damage to human and property.
© 2014 TP Vision Europe B.V. All rights reserved. Document order number: Philips and the Philips' shield emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.
