Register your product and get support at 4503 series www.philips.
Contents 1 Get Support 12.3 End of Use 3 13 Specifications 1.1 Identify and Register your TV 3 1.2 TV Help and User Manual 3 1.3 On-line Help and User Manual 3 1.4 Consumer Care / Repair 3 2 Software 4 4 3 Quick Guide 41 13.1 Power 41 13.2 Reception 41 13.3 Display Resolution 41 13.4 Display Input Resolution 13.5 Sound 42 13.6 Multimedia 42 13.7 Connectivity 42 4 2.1 Update Software 2.2 Software Version 40 5 14 Troubleshooting 3.1 Remote Control 5 3.2 IR sensor 6 3.
On the support site you can find your country's telephone number to contact us as well as answers to frequently asked questions (FAQs). In some countries, you can chat with one of our collaborators and ask your question directly or send a question by email. You can download new TV software or the manual to read on your computer. 1 Get Support 1.1 Identify and Register your TV For more TV troubleshooting and frequently asked questions (FAQs)...
2 Look for OAD updates (Over-the-air Download) Software Scan to search for an Over-the-air software update. 2.1 Update Software (Home) > Settings > Update software > for OAD updates. Search for Updates * The availability of OAD updates is dependent on your country. (Home) > Settings > Update software > Search for updates. 2.2 You need a computer and a USB memory device to upload the software on the TV. Use a USB memory device with 256MB free space.
3 Quick Guide 3.1 Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote control, the batteries might be empty. 1. Standby / On To switch the TV on or back to Standby. To replace the batteries, open the battery compartment on the back of the remote control. 2. Playback keys - Play , to playback - Pause , to pause playback - Stop , to stop playback - Rewind , to rewind - Fast forward , to go fast forward - Record , to record now 1.
5. BACK To switch back to the previous channel you selected. To close a menu without changing a setting. 3.2 6. EXIT To switch back to watching TV. The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV. IR sensor 7. OPTIONS To open or close the Options menu. 8. OK key To confirm a selection or setting. 9.
through the list of sources, including the tuner selection. The menu will disappear automatically.
4 Wall Mounting Setting Up 4304, 4354 series TV 4.1 Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . . Read Safety Read the safety instructions first before you use the TV. To read the instructions, in chapter Safety and Care. User manual, see 4.
the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV. Connect Power Cable - Insert the power cable into the POWER connector on the back of the TV. - Make sure the power cable is securely inserted in the connector. - Make sure that the power plug, in the wall socket, is accessible at all times. - When you unplug the power cable, always pull the plug, never pull the cable. Caution Wall mounting the TV requires special skills and should only be performed by qualified personnel.
Switch On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV. Switch On Press the power button on the side or the back of the TV. Switch to standby To switch the TV to Standby, press on the remote control. To switch off the TV completely, disconnect the power plug. When disconnecting the power plug, always pull the power plug, never the cord.
5 Connections 5.1 Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu. 5.
that prevents copying content from a DVD disc or Bluray Disc. Also referred to as DRM (Digital Rights Management). HDMI - DVI If you still own a device that only has a DVI connection, you can connect the device to HDMI 2 connection with a DVI to HDMI adapter. Use a DVI to HDMI adapter if your device only has a DVI connection. Use HDMI 2 connection and add an Audio L/R cable (mini-jack 3.5mm) to Audio In for sound, on the back of the TV. * Network port is only for UK models 5.
(Home) > Settings > General settings > EasyLink > EasyLink > 5.5 On Audio Device Operate HDMI CEC-compatible devices with TV HDMI ARC remote control Only HDMI 1 on the TV have Return Channel). (Home) > Settings > General settings > EasyLink > EasyLink remote control > On HDMI ARC (Audio If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to HDMI 1 connection on this TV.
Headphones VGA (if available) You can connect a set of headphones to the connection on the side of the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately. Use a VGA cable if your device only has a VGA connection. Use VGA connection and add an Audio L/R cable (mini-jack 3.5mm) to Audio In for sound, on the back of the TV. 5.
Contact a digital TV operator for more information on terms & conditions. Watch Channel on Smart Card You can watch channels which are installed from CI/CAM cards. 1. While watching a TV channel, press LIST to open the channel list. 2. Select: CI+ Channel list . Set Passwords and PIN Codes For some CAMs, you must enter a PIN code to watch its channels. When you set the PIN code for the CAM, we recommend you to use the same code you are using to unlock the TV.
Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. Formatting removes all files from the USB Hard Drive. Warning Make the connection The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost.
6 Switch Source 6.1 Source List - To open the sources menu, press SOURCES . - To switch to a connected device, select the device with the arrows (up) or (down) and press OK. - To close the Source menu without switching to a device, press SOURCES again. 6.2 Rename Device - Only HDMI, VGA (if available), SCART (if available) sources can be renamed or replace device icon 1. Press SOURCES , and select HDMI or VGA (if available). 2. Press Edit and press OK. 3.
installlation > channels 7 Channels Search for channels > Update 7.1 Re-install all channels About Channels and Switch Channels (Home) > Settings > Antenna/cable installlation > Search for channels > Re-install channels 1. Select the country where you are now and press OK. 2. Select Antenna (DVB-T) or Cable (DVB-C) , and select one item you need to re-install. 3. Select Digital and analogue channels, Only digital channels, or Only analogue channels. 4. Select Start and press OK to update channels.
Symbol rate mode If your cable provider did not give you a specific symbol rate value to install the TV channels, leave the Symbol rate mode setting on Automatic. If you received a specific symbol rate value, select Manual. with and and change the number with and . To check the frequency, select Search and press OK. If you use DVB-C to receive channels, the option Symbol rate mode is available. For Symbol rate mode, select Automatic, unless your cable provider gave you a specific symbol rate value.
installation. This will speed up the installation. • Unicable - You can use a Unicable system to connect the antenna dish to the TV. You can select Unicable for 1 or for 2 satellites at the start of the installation. Satellite (if available) About Installing Satellites Up to 4 Satellites - LNB settings You can install up to 4 satellites (4 LNBs) on this TV. Select the exact number of satellites you wish to install at the start of the installation. This will speed up the installation.
new channels. Satellite Channel List (Home) > Settings > Satellite channel list - Polarisation - Select the polarisation you need. Satellite installlation > - Symbol rate mode - Select Manual to enter symbol rate. You can select your preferred satellite channel list when press LIST to open satellite channels. - Frequency - Enter the frequency for the transponer. Satellites can offer channel packages that bundle free channels (free-to-air) and offer a sorting that suits a country.
Channel List Copy select language and country. You can skip the channel search. Finish the installation. Introduction 2. Plug in the USB flash drive that holds the channel list of the other TV. Channel list copy is intended for dealers and expert users. 3. To start the channel list upload, press (Home) > Settings > General settings > Channel list copy > Copy to TV and press OK. Enter your PIN code if necessary.
Subtitles Status To switch on Subtitles, press SUBTITLE. Select Status to view technical information on the channel. You can switch subtitles Subtitle on or Subtitle off . Alternatively you can select Automatic. Clock Automatic Display time on the corner of the TV screen. If language information is part of the digital broadcast and the broadcasted programme is not in your language (the language set on TV), the TV can show subtitles automatically in one of your preferred subtitle languages.
- Press (green) key to enter with upper-case - Press (yellow) key to enter number and symbol - Press (blue) key to delete a character Create or Edit Favourites Channel List LIST > OPTIONS > Create favourites list Select a channel then press OK to add in a favourites channel list, once completed, press Done. LIST > OPTIONS > 4. Select Done when complete the editing. 5. Press LIST again to close the channel list. Edit favourites 7.
2. Select Antenna - Favourite channels , Cable Favourite channels or Satellite - Favourite channels*, and press OK. 3. Press a colour key to select a colour-coded subject at the bottom of the screen. Text sub-pages 3. Press OPTIONS , and select Reorder channels. 4. Select the channel to reorder and press A Text page number can hold several subpages. The subpage numbers are shown on a bar next to the main page number. To select a subpage, press or . OK. 5.
5. Press (left) repeatedly if necessary, to close the menu.
8 Change Day TV Guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go back to the previous day. 8.1 What You Need Alternatively, you can press OPTIONS and select Change day. With the TV guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown.
Set a Recording You can set a recording in the TV Guide. In the TV Guide, a programme set to be recorded is marked with . To see the recording list, press Recordings , a programme set to be recorded is marked with a (red dot) on the front of the programme name. To record a programme… 1. Press TV GUIDE and select a future or ongoing programme. 2. Press the colour key Record . To cancel a recording… 1. Press TV GUIDE and select the programme set for recording. 2.
9 reformatting for use with a computer. Recording and Pause TV Note: Recording function is only for digital TV broadcast. It is not possible to record content from external devices (e.g. HDMI). 9.1 9.2 What You Need Recording If you connect a USB Hard Drive, you can pause or record digital TV broadcasts (DVB broadcasts or similar). What You Need You can record a digital TV broadcast and watch it later.
To record a programme… With the USB Hard Drive connected and formatted, the TV continuously stores the TV broadcast you are watching. When you switch to another channel, the broadcast of the former channel is cleared. Also when you switch the TV to standby the broadcast is cleared. 1. Press TV GUIDE. 2. On the TV guide, select the channel and programme you wish to record. Press (Right) or (Left) to scroll through the programmes of a channel. 3.
10 Photo Options Videos, Photos and Music With a photo on screen, press OPTIONS to… Start slideshow, Stop slideshow Start or stop slideshow. Slideshow transitions Set the transition from one picture to the next. 10.1 From a USB Connection Slideshow frequency Select the display time for each photo. You can view your photos or play your music and videos from a connected USB flash drive or USB Hard Drive. Repeat, Play once View the pictures repeatedly or once only.
2. Select USB Flash Drive and press (right) to select the USB device you need. 3. Select Videos and select one of video, you can press OK to play the selected video or press Play all to play all video files in the video folder. Music Options Options for playing music... Repeat, Play once Play songs repeatedly or once. Shuffle on, Shuffle off Play songs in sequence or at random.
11 11.3 Open TV Setting Menus Quick Settings and All Settings 11.1 Press SETUP key on the remote control to find frequently used settings in Quick settings menu. Quick settings menu: Home Menu Overview - Picture style: Select one of preset picture styles for ideal picture viewing. Press (Home) to select one of below menus, then press OK. - Picture format: Select one of preset picture format which fits the screen.
- Movie - Ideal for watching movies - Game - Ideal for gaming Adjust the colour enhancement Custom a style Select Maximum, Medium, or Minimum to set the level of the colour intensity and the details in bright colours. (Home) > Advanced > You can adjust and stored picture settings in in the currently selected picture style, like Colour, Contrast or Sharpness.
Screen Edges Gamma (Home) > Settings > Picture > Format and edges > Picture format > Screen edges (Home) > Settings > Picture > Advanced > Contrast > Gamma With Screen edges, you can slightly enlarge the picture to hide distorted edges. Press the arrows (up) or (down) to set a nonlinear setting for picture luminance and contrast.
volume of a connected headphone separately. Clear Sound (Home) > Settings > Sound > Advanced > Clear sound Surround Sound (Home) > Settings > Sound > Select On to improve the sound for speech. Ideal for news programmes. Surround mode Select the surround sound effect for the internal TV speakers. Digital Output Settings Digital output settings are available for optical and HDMI ARC sound signals.
the sound of the TV picture. You can set the value in steps of 5ms. Maximum setting is 60ms. CAM Operator Profile (Home) > Settings > Operator Profile General settings > CAM To switch on operator profile for CI+/CAM for easy channel installation and updates. Eco Settings HDMI-CEC Connection - EasyLink Set energy saving level (Home) > saving Settings > Eco settings > Energy Connect HDMI CEC-compatible devices to your TV, you can operate them with the TV remote control.
Redo full TV installation , and set TV status back to Clock the first time you switch on (Home) > Settings > settings > Reinstall TV (Home) > Settings > language > Clock General Enter PIN code and select Yes, the TV will reinstall completely. All settings will be reset and installed channels will be replaced. The installation can take a few minute Correct clock automatically (Home) > Settings > Region and language > Clock > Auto clock mode - The standard setting for the TV clock is Automatic.
the current code use 8888 and enter a new code. Universal Access Settings (Home) > Settings > Universal access Lock for Programme With Universal Access switched on, the TV is prepared for use for the deaf, hard of hearing, blind or partially sighted people. (Home) > Settings > Child lock > Parental rating Set a minumum age to watch rated programmes. Switch on universal access settings (Home) > Settings > Universal access > Universal access > On.
12 12.3 Environmental End of Use Disposal of your old product and batteries 12.1 Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. European Energy Label The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is, the lower the energy it consumes.
13 13.3 Specifications Display Resolution 13.1 4304, 4354 series TV Power Diagonal screen size - 24PHx43x4 : 60 cm / 24 inch Product specifications are subject to change without notice. For more specification details of this product, see www.philips.com/TVsupport Display resolution - PHx43x4: 1366x768 Power - Mains power : AC 220-240V +/-10% - Ambient temperature : 5°C to 35°C 4504 series TV For power consumption information, see chapter Product Fiche.
- Subtitle: SRT, SMI, SSA, SUB, ASS, TXT For PFx series TV Video formats 13.7 Resolution — Refresh rate Connectivity - 480i - 60 Hz - 480p - 60 Hz - 576i - 50 Hz - 576p - 50 Hz - 720p - 50 Hz, 60 Hz - 1080i - 50 Hz, 60 Hz - 1080p - 24 Hz, 25 Hz, 30 Hz 4304, 4354, 5304 series TV For 24PHS43x4, 22PFS5304 TV Rear - HDMI 1 ARC: HDMI Audio Return Channel - HDMI 2 - DIGITAL AUDIO OUT: SPDIF - VGA - AUDIO IN (DVI/VGA): Stereo 3.
TV Side - CI: Common Interface - USB - TV ANTENNA: 75 ohm coaxial (IEC) For 32PHT4504 TV Rear - HDMI 1 ARC: HDMI Audio Return Channel - HDMI 2 - Headphones: Stereo 3.
- If the standby light on TV is on, the TV might not respond to the remote control. 14 Troubleshooting Creaking sound at startup or switch off When you are turning the TV on, off or to standby, you hear a creaking sound from the TV chassis. The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance. 14.
14.4 Picture position is incorrect Channels - Picture signals from some devices may not fit the screen correctly. Check the signal output of the connected device. No digital channels found during the installation Computer picture is not stable See the technical specifications to make sure that your TV supports DVB-T or DVB-C in your country. Make sure that all cables are properly connected and that the correct network is selected.
behaviour is normal. 14.8 USB Photos, videos and music from a USB device do not show - Make sure that the USB storage device is set to Mass Storage Class compliant, as described in the storage device's documentation. - Make sure that the USB storage device is compatible with the TV. - Make sure that the audio and picture file formats are supported by the TV.
15 care to avoid injury or damage. Safety and Care Risk of damage to the TV ! Before you connect the TV to the power outlet, ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different. 15.1 Safety Important Risk of Injury to Children Read and understand all safety instructions before you use the TV. If damage is caused by failure to follow instructions, the warranty does not apply.
to adjust earlier supplies accordingly. Low Temperatures The written material packaged with the TV and the manual stored in the memory of the TV or downloaded from the Philips website www.philips.com/TVsupport are believed to be adequate for the intended use of the system. If the TV is transported in temperatures below 5°C or 41°F, unpack the TV and wait until the TV temperature reaches room temperature before connecting the TV to the power outlet.
products. TP Vision is committed to developing, producing and marketing products that cause no adverse health effects. TP Vision confirms that, as long as its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. TP Vision plays an active role in the development of international EMF and safety standards, enabling TP Vision to anticipate further developments in standardisation for early integration in its products.
16 16.4 Copyrights Other Trademarks 16.1 All other registered and unregistered trademarks are the property of their respective owners. HDMI The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 16.2 Dolby Audio Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. 16.3 DTS 2.
Source: http://www.denx.de/wiki/U-Boot 17 Open Source vmlinux (3.1.10) 17.1 linux kernel Open Source Software Source: http://git.kernel.org/cgit/linux/kernel/git/stable/linuxstable.git This television contains open source software. TP Vision Europe B.V. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences. busybox (v1.23.
freetype (2.5.3) openssl-0.9.8 (1.0.0) FreeType is a freely available software library to render fonts. OpenSSL is a robust, commercial-grade, and fullfeatured toolkit for the Transport Layer Security (TLS) and Secure Sockets Layer (SSL) protocols. Source: http://www.freetype.org/license.html Source: http://www.openssl.org/source/license.html libc (2.16) sqlite (3.7.11) The GNU C Library is used as the C library in the GNU systems and most systems with the Linux kernel.
icu (4.2.1) ICU is a mature, widely used set of C/C++ and Java libraries providing Unicode and Globalization support for software applications. Source: http://site.icu-project.org/home pixman (0.19.6) Pixman is a low-level software library for pixel manipulation, providing features such as image compositing and trapezoid rasterization. Source: http://www.pixman.org/ pango (1.28.1) Pango is a library for laying out and rendering of text, with an emphasis on internationalization. Source: https://www.pango.
Index Headphone Volume 35 Hearing Impaired 39 Help Menu 3 Home Menu 33 A Add Satellite 20 Advanced Picture Contrast Settings 34 Advanced Picture Settings 34 Antenna Connection 11 Audio Description 39 Audio Effects 39 Audio Language 38 Auto Clock Mode 38 Auto Volume Levelling 36 I Identify TV 3 Install Channel 18 Install Channel - Antenna 18 Install Channel - Cable 18 Install Channel - Satellite 20 B L Bass 35 Batteries 5 Language Settings 38 M C Menu Language 38 Mixed Volume 39 MPEG Artefact Reduct
Speakers or Headphones 39 Standby Mode 10 Subtitle Language 38 Super Resolution 35 Surround Sound 36 Switching On 10 T Teletext 25 Text 25 Text Language 38 Time 38 Time Settings 38 Time Zone 38 Troubleshooting 44 TV placement 8 U Universal Access 39 Update Satellite Channels 20 Update Software 4 Update Software - Local Updates 4 Update Software - OAD 4 USB Flash Drive 15 USB Hard Drive 15 USB Hard Drive, Format 37 User Manual 3 Utilities Menu 33 V VGA Connection 14 Video Contrast 34 Videos, Photos and Mu
Powered by TCPDF (www.tcpdf.
