Register your product and get support at 4503 series www.philips.
Contents 1 Get Support 1.1 Identify and Register your TV 3 1.2 TV Help and User Manual 3 1.3 On-line Help and User Manual 3 1.4 Consumer Care / Repair 3 2 Software 13 Specifications 4 4 5 3.1 Remote Control 5 3.2 IR sensor 6 3.3 Joystick - Local Control (if available) 3.4 Bluetooth connection (for 5703 series) 4 Setting Up 14 Troubleshooting 6 7 8 13 51 5.1 Connectivity guide 13 5.2 Antenna 13 5.3 Satellite (if available) 13 5.4 Video Device 14 5.5 Audio Device 16 5.
telephone number to contact us as well as answers to frequently asked questions (FAQs). In some countries, you can chat with one of our collaborators and ask your question directly or send a question by email. You can download new TV software or the manual to read on your computer. 1 Get Support 1.1 Identify and Register your TV For more TV troubleshooting and frequently asked questions (FAQs)... Identify your TV - TV model number and serial Go to http://philips-tvconsumercare.kxondemand.
2 Local Updates Software For dealers and expert users… (Home) > updates. 2.1 Update Software Search for Updates Settings > Update software > Local Look for OAD updates (Over-the-air Download) (Home) > Settings > Update software > Search for updates. Scan to search for an Over-the-air software update. You need a computer and a USB memory device to upload the software on the TV. Use a USB memory device with 256MB free space. Make sure that write protection is switched off.
3 Quick Guide 3.1 Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote control, the batteries might be empty. 1. Standby / On To switch the TV on or back to Standby. To replace the batteries, open the battery compartment on the back of the remote control. 2. Playback keys - Play , to playback - Pause , to pause playback - Stop , to stop playback - Rewind , to rewind - Fast forward , to go fast forward - Record , to record now 1.
5. BACK To switch back to the previous channel you selected. To close a menu without changing a setting. 3.2 6. EXIT To switch back to watching TV. The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV. IR sensor 7. OPTIONS To open or close the Options menu. 8. OK key To confirm a selection or setting. 9.
through the list of sources, including the tuner selection. The menu will disappear automatically. 3.4 Bluetooth connection (for 5703 series) Your TV has Bluetooth technology inside. The technology allows easy wireless connection between built-in Bluetooth sound station and Bluetooth devices, such as smartphones. So you can enjoy your favourite music wirelessly. To build Bluetooth connection, you need to pair (link) the sound station with your mobile device.
4 Setting Up 4.1 Read Safety Read the safety instructions first before you use the TV. To read the instructions, in chapter Safety and Care. User manual, see - Do not put bluetooth sound station on soft surface, that will impact the audio play effect. 4.2 TV Placement Tips on Placement - Position the TV where light does not shine directly on the screen. - Position the TV up to 15 cm away from the wall. - The ideal distance to watch TV is 3 times its diagonal screen size.
- 22PFS4022 - VESA MIS-F 75x75, M4 (Minimum 10 mm, Maximum 10.5 mm) - 24PHS40x2 - VESA MIS-F 75x75, M4 (Minimum 10 mm, Maximum 10.5 mm) - 32PHS4x32 - VESA MIS-F 100x100, M4 (Minimum 10 mm, Maximum 14 mm) according to the TVs weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.
Caution Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TVs weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.
plug, never pull the cable. Connect Power Cable (4022, 4032, 4132, 4203, 4503, 5303, 5503, 5703 series) - Insert the power cable into the POWER connector on the back of the TV. - Make sure the power cable is securely inserted in the connector. - Make sure that the power plug, in the wall socket, is accessible at all times. - When you unplug the power cable, always pull the plug, never pull the cable.
When the TV in standby, press on the remote control to switch the TV on. Switch to standby To switch the TV to standby, press on the remote control. Switch Off To switch the TV Off, press the power button on the top of the bluetooth sound station. The TV indicator light goes off. The TV is still connected to the mains power but consumes very little energy. To switch off the TV completely, disconnect the power plug. When disconnecting the power plug, always pull the power plug, never the cord.
5 Connections 5.1 Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu. 5.
* Network port is only for UK models * Network port is only for UK models ** Satellite port is only for xxPxSxxxx series ** Satellite port is only for xxPxSxxxx series Copy protection HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Bluray Disc. Also referred to as DRM (Digital Rights Management). 5.
Switch on EasyLink (Home) > Settings > General settings > EasyLink > EasyLink > On Operate HDMI CEC-compatible devices with TV remote control For 22"/24" (Home) > Settings > General settings > EasyLink > EasyLink remote control > On Note: - EasyLink might not work with devices from other brands. - The HDMI CEC functionality has different names on different brands. Some examples are: Anynet, Aquos Link, Bravia Theatre Sync, Kuro Link, Simplink and Viera Link.
For 22"/24" 5.5 Audio Device HDMI ARC Only HDMI 1 on the TV have Return Channel). HDMI ARC (Audio If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to HDMI 1 connection on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals.
Connect via Bluetooth Launch via Bluetooth button 1. Press Bluetooth button on the top of Bluetooth sound station. 2. Turn on Bluetooth on your Bluetooth devices, such as smartphones, tablets or even laptops. 3. Search Bluetooth sound station on your Bluetooth device, then select the item starts with "Philips TV ...". 3. The LED on Bluetooth sound station will light blue. 4. Bluetooth is connected and ready to play music from your Bluetooth device. 5.
Warning Do not put bluetooth sound station on soft surface, that will impact the audio play effect. 5.7 Computer * Network port is only for UK models HDMI - DVI ** Satellite port is only for xxPxSxxxx series If you still own a device that only has a DVI connection, you can connect the device to HDMI 2 connection with a DVI to HDMI adapter. VGA (if available) Use a DVI to HDMI adapter if your device only has a DVI connection. Use HDMI 2 connection and add an Audio L/R cable (mini-jack 3.
slot permanently. Ideal Settings (Home) > Advanced > Settings > Computer When you switch on the TV, it may take a few minutes before the CAM is activated. If a CAM is inserted and subscription fees are paid (subscription methods can differ), you can watch the scrambled channels supported by the CAM smart card. Picture > Set to On to have the ideal picture setting for use your TV as a computer monitor. The CAM and smart card are exclusively for your TV.
Warning The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer. USB Hard Drive 5.
4. Select Connect to network and press OK. 5. Select Wired and press OK. The TV constantly searches for the network connection. 6. A message will be shown when the connection is successful. If the connection fails, you can check the DHCP setting of the router. DHCP should be switched on. Network Settings (Home) > settings Settings > Network > View network You can view all current network settings here. The IP and MAC address, signal strength, speed, encryption method, etc.
6 Switch Source 6.1 Source List - To open the sources menu, press SOURCES . - To switch to a connected device, select the device with the arrows (up) or (down) and press OK. - To close the Source menu without switching to a device, press SOURCES again. 6.2 Rename Device - Only HDMI, VGA (if available), SCART (if available) sources can be renamed or replace device icon 1. Press SOURCES , and select HDMI or VGA (if available). 2. Press Edit and press OK. 3.
installlation > channels 7 Channels Search for channels > Update 7.1 Re-install all channels About Channels and Switch Channels (Home) > Settings > Antenna/cable installlation > Search for channels > Re-install channels 1. Select the country where you are now and press OK. 2. Select Antenna (DVB-T) or Cable (DVB-C) , and select one item you need to re-install. 3. Select Digital and analogue channels, Only digital channels, or Only analogue channels. 4. Select Start and press OK to update channels.
Symbol rate mode If your cable provider did not give you a specific symbol rate value to install the TV channels, leave the Symbol rate mode setting on Automatic. If you received a specific symbol rate value, select Manual. frequency, position the arrows on a number with and and change the number with and . To check the frequency, select Search and press OK. If you use DVB-C to receive channels, the option Symbol rate mode is available.
installation. This will speed up the installation. • Unicable - You can use a Unicable system to connect the antenna dish to the TV. You can select Unicable for 1 or for 2 satellites at the start of the installation. Satellite (if available) About Installing Satellites Up to 4 Satellites - LNB settings You can install up to 4 satellites (4 LNBs) on this TV. Select the exact number of satellites you wish to install at the start of the installation. This will speed up the installation.
new channels. Satellite Channel List (Home) > Settings > Satellite channel list - Polarisation - Select the polarisation you need. Satellite installlation > - Symbol rate mode - Select Manual to enter symbol rate. You can select your preferred satellite channel list when press LIST to open satellite channels. - Frequency - Enter the frequency for the transponer. Satellites can offer channel packages that bundle free channels (free-to-air) and offer a sorting that suits a country.
Channel List Copy To not installed TVs Introduction Depending on whether your TV is already installed or not, you must use a different method to upload a channel list. Channel list copy is intended for dealers and expert users. To a TV that is not yet installed With Channel list copy, you can copy the channels installed on one TV onto another Philips TV of the same range. With Channel list copy, you avoid the time-consuming channel search by uploading a predefined channel list on a TV.
1. While watching a channel, press OPTIONS. 2. Press OPTIONS again to close. press (right). 3. Select Mono or Stereo and press OK. 4. Press (left) repeatedly if necessary, to close the menu. Subtitles To switch on Subtitles, press SUBTITLE. Status You can switch subtitles Subtitle on or Subtitle off . Alternatively you can select Automatic. Select Status to view technical information on the channel.
7. Select Done when complete the editing. 8. Press LIST again to close the channel list. keyboard. Use navigation keys to select a character, then press OK.
Reorder Channels Text / Teletext You can reorder, reposition channels in the Favourite channel list. Text Pages 1. While watching a TV channel, press LIST > OPTIONS > list. To open Text/Teletext press TEXT, while you are watching TV channels. To close Text, press TEXT again. Select channel Select a Text page 2. Select Antenna - Favourite channels , Cable Favourite channels or Satellite - Favourite channels*, and press OK. 3. Select the channel to reorder and press To select a page . . . 1.
Text Setup Text language Some digital TV broadcasters have several Text languages available. To set your primary and secondary Text language . . . 1. Press , select Setting > General settings and press (right) to enter the menu. 2. Select Languages and press (right) to enter the menu. 3. Select Primary teletext or Secondary teletext , and press OK. 4. Select the language you need and press OK. 5. Press (left) repeatedly if necessary, to close the menu. Text 2.5 If available, Text 2.
8 Change Day TV Guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go back to the previous day. 8.1 What You Need Alternatively, you can press OPTIONS and select Change day. With the TV guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown.
Set a Recording You can set a recording in the TV Guide. In the TV Guide, a programme set to be recorded is marked with . To see the recording list, press Recordings , a programme set to be recorded is marked with a (red dot) on the front of the programme name. To record a programme… 1. Press TV GUIDE and select a future or ongoing programme. 2. Press the colour key Record . To cancel a recording… 1. Press TV GUIDE and select the programme set for recording. 2.
The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer. 9 Recording and Pause TV 9.1 What You Need 9.
9.3 Schedule a Recording Pause TV You can schedule a recording of an upcoming programme for today or a few days from today (maximum of 8 days away). The TV will use the data from the TV Guide to start and end the recording. What You Need You can pause a digital TV broadcast and resume watching it a bit later. To record a programme… 1. Press TV GUIDE. 2. On the TV guide, select the channel and programme you wish to record. Press (Right) or (Left) to scroll through the programmes of a channel. 3.
10 Photo Options Videos, Photos and Music With a photo on screen, press OPTIONS to… Start slideshow, Stop slideshow Start or stop slideshow. Slideshow transitions Set the transition from one picture to the next. 10.1 From a USB Connection Slideshow frequency Select the display time for each photo. You can view your photos or play your music and videos from a connected USB flash drive or USB Hard Drive. Repeat, Play once View the pictures repeatedly or once only.
folder. Music Options Options for playing music... Video Options Repeat, Play once Play songs repeatedly or once. During the video playback, press OPTIONS to… Subtitles Display the subtitles if available, select On, Off, or On during mute. Shuffle on, Shuffle off Play songs in sequence or at random. Subtitle language Play the subtitle language if available. Charater set Select one of system for charater. Audio language Play the audio language if available.
11 11.3 Open TV Setting Menus Quick Settings and All Settings 11.1 Press SETUP key on the remote control to find frequently used settings in Quick settings menu. Quick settings menu: Home Menu Overview - Picture style: Select one of preset picture styles for ideal picture viewing. Press (Home) to select one of below menus, then press OK. - Picture format: Select one of preset picture format which fits the screen.
- Movie - Ideal for watching movies - Game - Ideal for gaming Adjust the colour enhancement Custom a style Select Maximum, Medium, or Minimum to set the level of the colour intensity and the details in bright colours. (Home) > Advanced > You can adjust and stored picture settings in in the currently selected picture style, like Colour, Contrast or Sharpness.
Not available for below cases: - (Home) > Settings > Picture > Advanced > Computer > On - (Home) > Settings > Picture > > Game. Gamma (Home) > Settings > Picture > Advanced > Contrast > Gamma Press the arrows (up) or (down) to set a nonlinear setting for picture luminance and contrast.
- Original - Most neutral sound setting - Movie - Ideal for watching movies - Music - Ideal for listening to music - Game - Ideal for gaming - News - Ideal for speech Advanced Sound Settings Volume Control Auto volume levelling (Home) > Settings > Auto volume levelling Custom a style Sound > Advanced > Select On to automatically level out sudden volume differences. Typically when you are switching channels.
- If you have a Home Theatre System (HTS) with multichannel sound processing capabilities, set Digital out format to Multichannel. With Multichannel, the TV can send the compressed multichannel sound signal from a TV channel or connected player to the Home Theatre System. (Home) > Settings > Eco settings > Screen off - If you have a Home Theatre System without multichannel sound processing, select Stereo.
Region and Language Settings Operate HDMI CEC-compatible devices with TV remote control Language (Home) > Settings > General settings > EasyLink > EasyLink remote control > On. (Home) > Settings > language > Language Change the language of the TV menu and Note: messages - EasyLink might not work with devices from other brands. (Home) > Settings > Region and language > Language > Menu language - The HDMI CEC functionality has different names on different brands.
UTC - Coordinated Universal Time information. access > Hearing impaired > On - If the clock is not correct, you can set the TV clock to Country dependent. - Some digital TV channels broadcast special audio and subtitles adapted for the hard of hearing or deaf people. - Switched on, the TV automatically switches to the adapted audio and subtitles, if available.
CAM PIN (Home) > Settings > Child lock > CAM PIN Set CAM PIN for recording.
Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. 12 Environmental 12.1 European Energy Label The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is, the lower the energy it consumes.
13 For PxS series TV Specifications - Aerial input : 75 ohm coaxial (IEC75) - Tuner bands : Hyperband, S-Channel, UHF, VHF - DVB : DVB-T2, DVB-C (cable) QAM - Analogue video playback : SECAM, PAL - Digital video playback : MPEG2 SD/HD (ISO/IEC 13818-2), MPEG4 SD/HD (ISO/IEC 14496-10), HEVC* - Digital audio playback (ISO/IEC 13818-3) - Satellite aerial input : 75 ohm F-type - Input frequency range : 950 to 2150MHz - Input level range : 25 to 65 dBm - DVB-S2 QPSK, symbol rate 2 to 45M symbols, SCPC and MCP
13.
MPEG1, MPEG2, MPEG4, WMV9/VC1, HEVC 4022 series TV - Subtitle: SRT, SMI, SSA, SUB, ASS, TXT - Output power (RMS) : 6W - Dolby Audio - DTS 2.0+ Digital out ™ 13.8 Connectivity 4032 series TV 4022, 4032 series TV (22 inch, 24 inch) - Output power (RMS) : 24" - 6W, 32" - 16W - Dolby Audio - DTS 2.0+ Digital out ™ For PxS4xx2 TV Rear - HDMI 1 ARC: HDMI Audio Return Channel - HDMI 2 - DIGITAL AUDIO OUT: SPDIF - VGA - AUDIO IN (DVI/VGA): Stereo 3.
- CI: Common Interface - USB - Headphones: Stereo 3.5mm mini-jack For xxPxT4203, 32PHT4503, xxPFT5503 TV Rear - HDMI 1 ARC: HDMI Audio Return Channel - HDMI 2 - DIGITAL AUDIO OUT: SPDIF - AUDIO IN (DVI): Stereo 3.5mm mini-jack - TV ANTENNA: 75 ohm coaxial (IEC) - Network LAN - RJ45 (for Freeview HD)* TV Side - CI: Common Interface - USB - Headphones: Stereo 3.
- If the standby light on TV is on, the TV might not respond to the remote control. 14 Troubleshooting Creaking sound at startup or switch off When you are turning the TV on, off or to standby, you hear a creaking sound from the TV chassis. The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance. 14.
14.4 Picture position is incorrect Channels - Picture signals from some devices may not fit the screen correctly. Check the signal output of the connected device. No digital channels found during the installation Computer picture is not stable See the technical specifications to make sure that your TV supports DVB-T or DVB-C in your country. Make sure that all cables are properly connected and that the correct network is selected.
behaviour is normal. 14.8 USB Photos, videos and music from a USB device do not show - Make sure that the USB storage device is set to Mass Storage Class compliant, as described in the storage device's documentation. - Make sure that the USB storage device is compatible with the TV. - Make sure that the audio and picture file formats are supported by the TV.
15 care to avoid injury or damage. Safety and Care Risk of damage to the TV ! Before you connect the TV to the power outlet, ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different. 15.1 Safety Important Risk of Injury to Children Read and understand all safety instructions before you use the TV. If damage is caused by failure to follow instructions, the warranty does not apply.
to adjust earlier supplies accordingly. Low Temperatures The written material packaged with the TV and the manual stored in the memory of the TV or downloaded from the Philips website www.philips.com/support are believed to be adequate for the intended use of the system. If the TV is transported in temperatures below 5°C or 41°F, unpack the TV and wait until the TV temperature reaches room temperature before connecting the TV to the power outlet.
standards applicable at the time of producing the products. TP Vision is committed to developing, producing and marketing products that cause no adverse health effects. TP Vision confirms that, as long as its products are handled properly for their intended use, they are safe to use according to scientific evidence available today.
16 16.4 Copyrights Other Trademarks 16.1 All other registered and unregistered trademarks are the property of their respective owners. HDMI The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 16.2 Dolby Audio Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. 16.3 DTS 2.
17 busybox (v1.23.2) Open Source BusyBox combines tiny versions of many common UNIX utilities into a single small executable. It provides replacements for most of the utilities you usually find in GNU fileutils, shellutils, etc. The utilities in BusyBox generally have fewer options than their full-featured GNU cousins; however, the options that are included provide the expected functionality and behave very much like their GNU counterparts.
libtinycompress (1.1) libfreetype (2.6.3) A library to handle compressed formats like MP3 etc. FreeType is a freely available software library to render fonts. Source: http://git.alsaproject.org/?p=tinycompress.git;a=summary It is written in C, designed to be small, efficient, highly customizable, and portable while capable of producing high-quality output (glyph images) of most vector and bitmap font formats. Gstreamer (V1.0) Source: http://www.freetype.
the library size can be less than 500KiB, depending on the target platform and compiler optimization settings. Source: https://sqlite.org/ libpng (1.6.16) libpng is the official PNG reference library. It supports almost all PNG features. Source: http://libpng.org/pub/png/libpng.html libstbci-openssl.a (1.0.2g) OpenSSL is an open source project that provides a robust, commercial-grade, and full-featured toolkit for the Transport Layer Security (TLS) and Secure Sockets Layer (SSL) protocols.
Index Headphone Volume 41 Hearing Impaired 44 Help Menu 3 Home Menu 38 A Add Satellite 25 Advanced Picture Contrast Settings 39 Advanced Picture Settings 39 Antenna Connection 13 Audio Description 44 Audio Effects 44 Audio Language 43 Auto Clock Mode 43 Auto Volume Levelling 41 I Identify TV 3 Install Channel 23 Install Channel - Antenna 23 Install Channel - Cable 23 Install Channel - Satellite 25 B L Bass 41 Batteries 5 Language Settings 43 M C Menu Language 43 Mixed Volume 44 MPEG Artefact Reduct
Speakers or Headphones 44 Standby Mode 11 Subtitle Language 43 Super Resolution 40 Surround Sound 41 Switching On 11 T Teletext 30 Text 30 Text Language 43 Time 43 Time Settings 43 Time Zone 43 Troubleshooting 51 TV placement 8 U Universal Access 44 Update Satellite Channels 25 Update Software 4 Update Software - Local Updates 4 Update Software - OAD 4 USB Flash Drive 19 USB Hard Drive 20 USB Hard Drive, Format 42 User Manual 3 Utilities Menu 38 V VGA Connection 18 Video Contrast 39 Videos, Photos and Mu
Powered by TCPDF (www.tcpdf.
