32PHS4012 42PFS4012 43PFS4012 50PFS4012
Safety and Screen care Safety Risk of electric shock or fire! Risk of shor t circuit or fire! Risk of injur y or damage to the TV! Risk of injur y to children! Risk of swallowing batteries! Risk of overheating! Risk of injur y, fire or power cord damage! Risk of hearing damage! Low temperatures Screen care 4 4 4 4 4 4 4 4 4 4 4 4 INITIAL SETUP 5 Read safety 5 TV stand installation and wall mounting instructions 5 TV stand installation 5 Wall mounting instructions 5 Tips on placement 5 Power cable 5 Antenn
Recording and Time-shift Recording What you need Record a programme Open the list of recording Time-shift What you need Use Time-shift for a programme Replay 15 15 15 15 15 15 15 15 15 Sources Switch a device signal From standby EasyLink 15 15 15 15 Time Time settings Sleep timer Time Zone Auto Standby OSD Timer Summer Time 16 16 16 16 16 16 16 LOCK System Lock Set Password Channel Lock Parental Guidance Key Lock 16 16 16 16 16 16 SETTING General Settings Language TTX Language Audio Language Subtitl
Risk of swallowing batteries! Safety and Screen care • The product/remote control may contain a coin-type batter y, which can be swallowed. Keep the batter y out of reach of children at all times! Risk of overheating! Safety Risk of electric shock or fire! • Never expose the TV to rain or water. • Never place liquid containers, such as vases, near the TV. If liquid was spilt on or into the TV, disconnect the TV from the power outlet immediately.
Tips on placement INITIAL SETUP • Position the TV where light does not shine directly on the screen. • Position the TV up to 15cm away from the wall. • The ideal distance to watch TV is 3 times its diagonal screen size. When seated your eyes should be level with centre of screen. Read safety Please read the safety instructions first before you use the TV. In Help, go to Safety and Screen care.
HDMI ports Connecting Your Devices About connection Connectivity guide Always connect a device to the TV with the highest quality connection Available. Also use good quality cables to ensure a good transfer of picture and sound. If you need help to connect several devices to the TV, you can visit the Philips TV connectivity guide. The guide offers information on how to connect and which cables to use. Go to www.connectivityguide.philips.com.
Y Pb Pr - Audio L R CVBS-Composite video is a high quality connection. Next to the CVBS signal is the Audio left and right for sound. COMPONENT Leave the card in the slot permanently. It may take a few minutes before the CAM is activated. Removing the CAM will deactivate the broadcast ser vice on the TV. If a CAM is inser ted and subscription fees are paid,(connection method can differ), you can watch the TV broadcast. The inser ted C AM is exclusively for your TV.
Home Theatre System Connect with HDMI ARC Home Theatre HDMI (ARC) TV while the TV is switch on. The TV detects the flash drive and show a window with a tips to whether you can browse the USB flash drive. If the tips is disappeared, you can press SOURCE key, select MULTIMEDIA and press OK key to enter. Computer Use an HDMI cable to connect a Home Theatre System (HTS) to the TV. You can connect a Philips Soundbar or an HTS with a built-in disc player.
Power off To switch the TV off completely, press the hard Switch or unplug the power cord, and then the power indicator will be extinguished. If you do not use the TV for a long time, please unplug the power cord. Keys on TV If you lost the remote control or its batteries are empty, you can still do some basic TV operations. View the control buttons as below: 32PHS4001/32PHT4001/42PFS4012 CH+ CH - ②.
Remote Control 1. Key overview (4001 series) Top view 1 4 2 1. MENU - Turn on/off the menu. 2. INFO - Display the program information when it is available. 3. BACK - Return to the previous channel. 4. SOURCE - To open or close the Source menu- the list of connected devices. 5. OPTION - Select an item of option settings for the TV. 6. OK - In menu mode: confirm the input or selection. 7. Arrow/ navigation keys, to navigate up, down, left or right. 8. EXIT - Press this key to exit menu. 9.
2. Key overview (4012 series) Top view 1 4 2 3 5 TV GUIDE SETUP FORMAT 6 1. Standby/ on: - To switch the TV on or back to Standby. , , 2.Play back keys , , - Shor tcut keys in USB mode: STOP, PAUSE, REWIND, START, FAST FORWARD. 3. TV GUIDE - An Instant access to TV program guide. - Availability of electronic program guide (EPG) is dependent on broadcasters or operators. 4. Recording - To record TV program, press ( Record) on the remote control.
IR sensor The TV can receive commands from a remote control that uses IR(infrared) to send commands. If you use such a remote control, hold it close to the TV and make sure you point the remote control at the infrared sensor on the front of the TV. Make sure that the line-of-sight between the remote control and TV is not blocked by furniture, walls or other objects. Batteries 1 . Slide the batter y door in the direction shown by the arrow. 2 . Inser t two type AAA-LR03-1.
enter into channel list. 3. In channel list, you can press / key to select your channel, long press key on the remote control to set your favourite channel, and long press key again to cancel it. 4. Press BACK key to return the current channel, you can long press key to show the Favourite list. Rename channel 1. While you entering ATV channel, press MENU key and select CHANNEL, press OK key to enter. 2. In channel menu, select Channel Edit and press OK key to enter into channel list. 3.
Band: Press / navigation key to select desired option. 2. Press key on remote control to enter Edit menu. The operations of Edit menu are the same as Add menu. 3. Press key on the remote control to enter Scan menu. Press / navigation key to select your desired item. Press / navigation key to set Channel Search ,such as: Scan Mode, Channel Type and Ser vice Type. 4. Press key on the remote control to delete the selected satellite.
Recording and Time-shift quit time-shift function. When you leave program for a shor t time, time-shift function can suspend and cache the playing program to U disk. When you resume playing, the program can continue to be played. Replay Recording What you need You can record a digital TV broadcast and watch it later. To record a TV programme you need... 1. A connected USB Hard Drive formatted on this TV. 2. Digital TV channels installed on this TV. 3.
Time SETTING Time settings General Settings Sleep timer Language With the sleep timer, you can set the TV to switch to standby automatically after a preset time. To set the sleep timer… 1. Press MENU key on the remote control, then press / key to select TIME on the screen, press OK key to enter the TIME menu. 2. Press / key select Sleep Timer, then press / key to adjust the value of standby time: Off, 15minute, 30minutes, 45minutes, 60minutes, 90minutes, 120 minutes, 240 minutes.
PICTURE Picture Setting Press MENU key to show main menu, select Picture icon and press OK key to enter. Picture Mode: press / key to set the picture display mode such as: Personal, Vivid, Standard, Mild. Contrast: press / key to adjust contrast value of picture (0~100). Brightness: press / key to adjust brightness value of picture (0~100). Colour: press / key to adjust colour value of picture (0~100). Tint: press / key to adjust Tint value of picture (it is available only in NTSC system).
TEXT Music In the multimedia menu, press / key to select Music, and press OK key enter. You can select the music in the File folder, and press START(►) key to play on the remote control. Music player menu options: The text menu options is same as Photo, please refer to photo options. In the multimedia menu, press / key to select TEXT, and press OK key enter. You can select the TEXT in the File folder, and press START(►) key to play on the remote control. 1. Press / key to select the last page. 2.
Dimensions and weights 32PHS4001 / 32PHT4001 Without base Dimension (W×H×D) : 732×430×76(mm) Weight: 4.4Kg With base Dimension (W×H×D): 732×474×193(mm) Weight: 4.5Kg 32PHS4012 Without base Dimension (W×H×D) : 732×432×76(mm) Weight: 4.0Kg With base Dimension (W×H×D): 732×492×183(mm) Weight: 4.0Kg 42PFS4012 Without base Dimension (W×H×D) : 947×553×78(mm) Weight: 6.6Kg With base Dimension (W×H×D): 947×610×226(mm) Weight: 6.7Kg 43PFS4001 / 43PFT4001 Without base Dimension (W×H×D): 970×564×75(mm) Weight: 8.
Software Software update It might be necessar y to update the TV software. You need a computer and a USB memor y device to upload the software on the TV. Use a USB memor y device with 256MB free space. Make sure that write protection is switched off. 1. Start the update on TV. To start the software update.... Press MENU key, select SETTING and press OK key. Select Software Update (USB), press OK key to star t update the software. Identify the TV.
Poor TV reception from the antenna connection: • Check that the antenna is properly connected to the TV. • Loudspeakers, unear thed audio devices, neon lights, high buildings and other large objects can influence reception quality. If possible, you tr y to improve the reception quality by changing the antenna direction or moving devices away from the TV. • If the reception on one par ticular channel is poor, please fine tune this channel.
7
