Register your product and get support at www.philips.
Contents 12.1 What you need 29 12.2 Record a programme 29 12.3 Watch a recording 29 1 Your new TV 3 1.1 Pause TV and recordings 3 1.2 EasyLink 3 13 Settings 30 2 Setting up 4 2.1 2.2 2.3 2.4 2.5 13.1 13.2 13.3 13.4 Read safety 4 TV stand and wall mounting 4 Tips on placement 4 Power cable 4 Antenna cable 5 14 Specifications 35 14.1 14.2 14.3 14.4 14.5 14.6 14.7 14.8 3 Connections 6 3.1 Tips on connections 6 3.2 EasyLink HDMI CEC 7 3.3 Common interface - CAM 8 3.4 Set-top box - STB 8 3.
1 Your new TV 1.1 Pause TV and recordings If you connect a USB Hard Drive, you can pause and record a broadcast from a digital TV channel. Pause your TV and answer that urgent phone call or simply take a break during a sports match, while the TV stores the broadcast on the USB Hard Drive. You can start watching again later. 1.2 EasyLink With EasyLink you can operate a connected device, like a Bluray Disc player, with the remote control of the TV.
Maximum 14 mm) - 32PHT4100/60 - VESA MIS-F 100x100, M4 (Minimum 12 mm, Maximum 16 mm) - 40Pxx4100 - VESA MIS-F 200x200, M4 (Minimum 12 mm, Maximum 16 mm) - 48Pxx4100 - VESA MIS-F 200x200, M6 (Minimum 12 mm, Maximum 16 mm) 2 Setting up 2.1 Read safety - 32Pxx4200 - VESA MIS-F 100x100, M4 (Minimum 10 mm, Maximum 14 mm) - 40Pxx4200 - VESA MIS-F 200x200, M4 (Minimum 12 mm, Maximum 16 mm) Read the safety instructions first before you use the TV. In Help, go to Safety and care > Safety.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. 2.5 Antenna cable Insert the antenna plug firmly into the ANTENNA socket at the back of the TV. You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector. Use this antenna connection for DVB-T and DVB-C input signals.
3 EasyLink HDMI CEC Connections If your devices are connected with HDMI and have EasyLink, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched On on the TV and the connected device. 3.1 Tips on connections DVI to HDMI Use a DVI to HDMI adapter if your device only has a DVI connection. Use one of the HDMI connections and add an Audio L/R cable (mini-jack 3.5mm) to Audio In for sound, on the back of the TV.
respective owners. Audio Out - Optical Audio Out - Optical is a high quality sound connection. This optical connection can carry 5.1 audio channels. If your device, typically a Home Theatre System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In Optical connection on the HTS. The Audio Out - Optical connection sends the sound from the TV to the HTS.
If you want devices to communicate but you don't want to operate them with the TV remote control, you can switch off EasyLink remote control separately. You can control multiple HDMI-CEC compliant devices with your TV remote control. In the EasyLink settings menu, select EasyLink Remote Control and select Off. Use the Common Interface slot on the TV to insert the CAM card. With the front of the card facing to you, gently insert the CAM as far as it will go. Leave the card in the slot permanently.
3.5 Audio Out settings Home Theatre System - HTS Audio Out delay Connect HTS With a Home Theatre System (HTS) connected to the TV, the picture on TV and the sound from the HTS should be synchronised. Use an HDMI cable to connect a Home Theatre System (HTS) to the TV. You can connect a Philips Soundbar or an HTS with a built-in disc player. Alternatively, you can use a SCART cable if the device has no HDMI connection.
format. 3. Select Multichannel or Stereo. 4. Press , repeatedly if necessary, to close the menu. Audio Out levelling Use the Audio Out leveling setting to level the volume (loudness) of the TV and the Home Theatre System when you switch over from one to another. Volume differences can be caused by differences in sound processing. If the Blu-ray Disc player has EasyLink HDMI CEC, you can operate the player with the TV remote control. To level the difference in volume . . . 1.
2. Switch on the USB Hard Drive and the TV. 3. When the TV is tuned to a digital TV channel, press (Pause). Trying to pause will start the formatting. Follow the instructions on screen. 3.9 When the USB Hard Drive is formatted, leave it connected permanently. USB Hard Drive Warning What you need The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application.
3. Select Game (for gaming) or select Computer (for watching a movie) and press OK. 3.11 Camcorder 4. Press , repeatedly if necessary, to close the menu. Remember to set the Game or computer setting back to Computer when you stop playing the game. HDMI For best quality, use an HDMI cable to connect the camcorder to the TV. 3.13 Headphones (For 4000, 4100, 4200, 6300 TV models) You can connect a set of headphones to connection on the TV. The connection is a minijack 3.5mm.
4 Switch on 4.1 On or Standby (For 4100, 4200 TV models) Make sure you plugged in the mains power on the back of the TV before you switch on the TV. If the red indicator light is off, press the Joystick on the right side or on the back of the TV to put the TV in standby - the red indicator will light up. With the TV in standby, press onon the remote control to switch the TV on. Switch to standby To switch the TV to standby, press on the remote control.
3. INFO To open or close programme infomation. 5 Remote control 4. BACK To switch back to the previous channel you selected. To close a menu without changing a setting. 5.1 Key overview (For 4000, 4100, 4200, 5210 TV models) 5. HOME To open or close the home menu. 6. EXIT To switch back to watching TV. Top 7. OPTIONS To open or close the Options menu. 8. OK key To confirm a selection or setting. 9. Arrow / navigation keys To navigate up, down, left or right. 10.
5.2 IR sensor The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV. 5.3 Batteries 1. Slide the battery door in the direction shown by the arrow. 2. Replace the old batteries with 2 type AAA-LR03-1.5V batteries. Make sure the + and the - ends of the batteries line up correctly. 3. Reposition the battery door. 4. Slide it back until it clicks.
6 Channel list TV channels View all channel list 6.1 1. While watching a TV channel, press LIST to open the channel list. 2. Press OPTIONS to open Option menu. 3. Select List, then you can select All, Favourites, Radio, and New channels. Watching TV channels Switch channels (For 4000, 4100, 4200, 5210 TV models) Favourite channels To watch TV channels, press . The TV tunes to the TV channel you last watched.
1. Press and select Setup and press OK. 2. Select Channel settings > Child lock > Change code and press OK. 3. If a code is set already, enter the current Child lock code and then enter the new code twice. Rename channels You can rename channels in the channel list. 1. Select the channel you want to rename in one of the channel lists. 2. Press OPTIONS. 3. Select Rename and press OK. The new code is set. Forgotten your code? To override and enter a new child lock code in case you forget it, enter 8888.
4. To close Text, press again. Digital Text (UK only) Some digital broadcasters offer dedicated Digital Text or interactive TV on their digital TV channels. This includes normal Text using the number, colour and arrow keys to select and navigate. To close Digital Text, press . Select a Text page Text options To select a page . . . In Text, press OPTIONS to select the following . . . 1. Enter the page number with the number keys. 2. Use the arrow keys to navigate. 3.
and open Status in the Options menu. Subtitles and languages Subtitles (For 4000, 4100, 4200, 5210 TV models) Audio languages Switch subtitles on Digital TV channels can broadcast audio with several spoken languages for a programme. You can set a preferred primary and secondary audio language. If audio in one of these languages is available, the TV will switch to this audio. If none of the preferred audio languages is available, you can select another audio language which is available.
1. Press and select Setup and press OK. 2. Select TV settings > General settings > Reinstall TV and press OK. The installation may take a few minutes. Follow the instructions on screen. If new channels are found or if channels are updated or removed, a message is shown at TV start up. The TV must be in standby to automatically update channels. To switch off the message at start up . . . Factory settings 1. Press and select Setup and press OK. 2. Select Channel settings and press OK. 3.
Antenna (DVB-T) or Cable (DVB-C) and press OK. 4. Select the DVB setting you want. 5. Press , repeatedly if necessary, to close the menu. Upload channel list Upload a copied channel list DVB-C channel installation Depending on whether your TV is already installed or not, you must use a different way to upload a channel list. For ease of use, all DVB-C settings are set to automatic.
1. Press and select Setup and press OK. 2. Select Channel settings > Channel installation > Analogue : manual installation and press OK. Symbol rate With the Symbol rate mode set to Manual, you can enter the symbol rate value you received from your cable provider. To enter the value, use the number keys. - System To set up the TV system, select System and press OK. Select your country or the part of the world where you are now. - Search channel To find a channel, select Search channel and press OK.
day. Select Previous day, Today or Next day and press OK, to select the day of the schedule. 7 TV guide 7.1 Using the TV guide Search by genre What you need If the information is available, you can look up scheduled programmes by genre like movies, sports, etc. With the TV guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown.
8 8.3 Sources EasyLink With EasyLink you can operate a connected device with the TV remote control. EasyLink uses HDMI CEC to communicate with the connected devices. Devices must support HDMI CEC and must be connected with an HDMI connection. 8.1 Sources list In the list of connections - the Source menu - you can find the devices connected to the TV.From this Source menu, you can switch to a device. Sources menu To open the Sources menu, press SOURCES.
3. Press , repeatedly if necessary, to close the menu. 9 Timers and clock 9.1 Sleep timer With the sleep timer, you can set the TV to switch to standby automatically after a preset time. To set the sleep timer . . . 1. Press and select Setup and press OK. 2. Select TV settings > General settings > Sleep timer. With the slider bar you can set the time to up to 180 minutes in increments of 5 minutes. If set to 0 minutes, the sleep timer is switched off.
View the pictures repeatedly or once only. 10 Your photos, videos and music - Shuffle off, Shuffle on View the pictures in sequential order, or at random. - Rotate image Rotate photo. 10.1 - Show info Display the picture name, date, size and next picture in the slide show. From a USB connection What you need To close Browse USB, press and select another activity. You can view your photos or play your music and videos from a connected USB flash drive or USB Hard Drive.
To close Browse USB, press and select another activity.
11 Pause TV 11.1 Pause TV You can pause a TV broadcast and resume watching it later. Only digital TV channels can be paused. You must connect a USB Hard Drive to buffer the broadcast. You can pause a broadcast for a maximum time span of 90 minutes. Pause or resume a broadcast To pause a broadcast, press (Pause). A progress bar appears briefly on screen. To call up the progress bar, press (Pause) again. To resume watching, press (Play).
12 List of recordings Recording To view the list of recordings and scheduled recordings, press , select Recordings and press OK. 12.1 In this list, you can select a recording to watch, remove recorded programmes, adjust the end time of an ongoing recording or check the free disc space. What you need To record a TV programme you need . . .
13 Picture settings Settings Backlight contrast 13.1 With Backlight contrast, you can adjust the brightness of the display backlight. Picture To adjust the level . . . 1. Press and select Setup and press OK. 2. Select TV settings > Picture > Backlight contrast. 3. Press (right) and adjust the value with (up) or (down). 4. Press , repeatedly if necessary, to close the menu. Picture style For easy picture adjustment, you can select a preset setting with Picture style. 1.
To reduce the MPEG artefact . . . 1. Press and select Setup and press OK. 2. Select TV settings > Picture > MPEG artefact reduction. 3. Press (right) and select On or Off. 4. Press , repeatedly if necessary, to close the menu. make the Custom tint menu available. Custom tint is a setting intended for expert users. To set a custom colour temperature . . . 1. Press and select Setup and press OK. 2. Select TV settings > Picture > Advanced > Custom tint. 3. Press (right). 4.
4. Press , repeatedly if necessary, to close the menu. You can adjust a Sound style . . . 1. Select the style and press OK. 2. Press and select Setup and press OK. 3. Select TV settings, navigate to the individual setting and adjust it. 4. Press to close the menu to store your setting. 13.3 Format and edges To return to the original Sound style values . . . 1. Press and select Setup and press OK. 2. Select TV settings > Sound > Restore style.
3. Press (up) or (down) to adjust the volume. 4. Press , repeatedly if necessary, to close the menu. or off. To switch on or off . . . 1. Press and select Setup and press OK. 2. Select TV settings > Sound > Advanced > Clear sound. 3. Press (right) and select On or Off. 4. Press , repeatedly if necessary, to close the menu. Advanced sound settings Auto volume levelling With Auto volume leveling, you can set the TV to automatically level out sudden volume differences.
- If you select EasyLink autostart, the TV will switch on the audio device, send the TV sound to the device and switch off the TV speakers. With EasyLink or EasyLink autostart selected, you can still switch to TV speakers if necessary. To set the TV speakers . . . 1. Press and select Setup and press OK. 2. Select TV settings > Sound > Sound output. 3. Press (right) and select Off, TV speakers, EasyLink or EasyLink autostart. 4. Press , repeatedly if necessary, to close the menu.
14 European energy label Specifications The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is, the lower the energy it consumes. On the label, you can find the energy efficiency class, the average power consumption of this product in use and the average energy consumption for 1 year. You can also find the power consumption values for this product on the Philips website for your country at www.philips.com/TV 14.
- Analogue video playback : NTSC; SECAM; PAL - Digital video playback : MPEG2 SD/HD (ISO/IEC 13818-2); MPEG4 SD/HD (ISO/IEC 14496-10) - Digital audio playback (ISO/IEC 13818-3) 576i - 50 Hz 576p - 50 Hz 720p - 50Hz, 60 Hz 1080i - 50Hz, 60 Hz 1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60 Hz 14.3 * For certain sets only. Display 14.
Width 1235 mm - Height 776.7 mm - Depth 279 mm - Weight ± 20.5 kg 32PFx4100, 32PHx4100/12, 32PHx4100/88, 32Pxx4200 - without TV stand: Width 726.5 mm - Height 425.4 mm - Depth 76.8 mm - Weight ± 4.82 kg 14.6 Connectivity for Pxx4100, Pxx4200 - with TV stand: Width 726.5 mm - Height 464.4 mm - Depth 181 mm - Weight ± 5.06 kg 32PHT4100/60 For PxK4100, PxK4200 - without TV stand: Width 732.5 mm - Height 428.1 mm - Depth 76.8 mm - Weight ± 5.
Pxx4200: 16W (RMS @ 10% THD) Pxx6300: 20W (RMS @ 15% THD) 14.8 Multimedia Note: Multimedia file names must not exceed 128 characters. Supported multimedia connections - USB 2.0 (FAT / FAT 32 / NTFS): only connect USB devices that consume 500 mA of power or less. Supported image files - JPEG: *.jpg, *.jpeg - PNG: *.png.jpg Supported audio files - MPEG1: *.mp3 Supported video files - *.avi, *.mp4, *.mov, *.mkv, *.mpg, *.
15 15.2 Software Software version To view the current TV software version . . . 15.1 1. Press and select Setup and press OK. 2. Select Software settings and press OK. 3. Select Current software info and see Release Version. 4. Press , repeatedly if necessary, to close the menu. Software update Update from USB It might be necessary to update the TV software. You need a computer and a USB memory device to upload the software on the TV. Use a USB memory device with 256MB free space.
libsqlite3 (3.7.14) libdirectfb (1.4.11) SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. DirectFB is a thin library that provides hardware graphics acceleration, input device handling and abstraction, integrated windowing system with support for translucent windows and multiple display layers, not only on top of the Linux Framebuffer Device. Source: http://linuxappfinder.
libexpat Expat is an XML parser library written in C. It is a stream-oriented parser in which an application registers handlers for things the parser might find in the XML document (like start tags). Source: http://expat.sourceforge.net/ libdrm libdrm provides core library routines for the X Window System to directly interface with video hardware using the Linux kernel's Direct Rendering Manager (DRM). Source: http://dri.freedesktop.org/libdrm/ FFMpeg (0.
then the TV returns to standby mode. This is normal behaviour. When the TV is disconnected and reconnected to the power supply, the startup screen is displayed at the next startup. To switch on the TV from standby, press on the remote control or the TV. 16 Troubleshooting and support The standby light keeps on blinking 16.1 Troubleshooting Disconnect the power cable from the power outlet. Wait 5 minutes before you reconnect the power cable. If the blinking reoccurs, contact Philips TV Consumer Care.
Select a non 'Auto' picture format. - Make sure that the USB storage device is set to Mass Storage Class compliant, as described in the storage device's documentation. - Make sure that the USB storage device is compatible with the TV. - Make sure that the audio and picture file formats are supported by the TV. Picture position is incorrect Picture signals from some devices may not fit the screen correctly. Check the signal output of the connected device.
16.5 Consumer Care / Repair For support and repair, call the Consumer Care hotline in your country. Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/support . TV model number and serial number You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV. Warning Do not attemp to repair the TV yourself.
17 Risk of injury or damage to the TV Safety and care - Two people are required to lift and carry a TV that weighs more than 25 kg or 55 lbs. 17.1 - If you mount the TV on a stand, only use the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can support the weight of the TV and the stand. Safety Important - When wall mounted, ensure that the wall mount can safely bear the weight of the TV set.
Lightning storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time.
consumers which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field (EMF) standards applicable at the time of producing the products. Philips is committed to develop, produce and market products that cause no adverse health effects.
Kensington Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world. Other trademarks All other registered and unregistered trademarks are the property of their respective owners.
Powered by TCPDF (www.tcpdf.
