2702.1 en 20-09-2007 08:28 Pagina 1 1 1.1 1.2 1.3 Important 3 Safety 3 Care of the screen 3 Recycling 3 2 2.1 2.2 Your TV 4 Television overview 4 Product highlights 5 3 3.1 3.2 3.3 3.4 3.5 3.6 Getting started 5 Position the TV 5 Wall mounting - VESA 5 Remote control batteries 7 Antenna cable 7 Connect the mains 7 First time installation 7 4 4.1 4.2 4.3 4.4 4.5 4.6 4.
702.1 en 20-09-2007 08:28 2007 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
1 20-09-2007 08:28 Pagina 3 Important Read this user manual before you start to use this product. Pay attention to this section and closely follow the instructions. The warranty does not apply to damage caused by not taking into account the instructions. • Stationary images Avoid stationary images as much as possible. If you can not, reduce screen contrast and brightness to prevent damage to the screen. Stationary images are images that remain on the screen for a long time.
2702.1 en 2 20-09-2007 08:28 Pagina 4 Your TV This section gives you an overview of the controls and functions of this TV. 2.
2.2 20-09-2007 08:28 Pagina 5 Product highlights Your new TV is equipped with some of the most modern audio or video innovations. Your TV offers the following advantages ... Ambilight For a more relaxed viewing experience and improved perceived picture quality. Perfect Pixel HD Offers perfect picture quality from any source. 3 Getting started This section helps you with the positioning and the first time installation of the TV. 3.
2702.1 en 3.2 20-09-2007 08:28 Pagina 6 Wall mounting - VESA Unmount the TV stand ‡ Locate the 4 screws of the TV stand. ) Caution Consider the TV’s weight if you wall mount it. Improper mounting could result in severe injury or damage. Koninklijke Philips Electronics N.V. bears no responsibility for improper mounting or mounting that results in accident or injury. Your TV is prepared for VESA compliant wall mounting. This bracket is not included.
3.3 20-09-2007 08:28 Pagina 7 Remote control batteries 3.5 Connect the mains cord ‡ Verify that your mains voltage corresponds with the voltage printed on the sticker at the back of the TV. Do not insert the mains cord if the voltage is different. ® Insert the mains cord tightly. ‡ Open the battery cover on the back of the remote control. ® Insert the 2 batteries supplied (Type AA-R61,5V). Make sure the + and - ends of the batteries line up correctly (inside of case is marked.) Ò Close the cover.
2702.1 en 4 20-09-2007 08:28 Pagina 8 Use your TV Learn how to operate your TV for daily use. 4.1 Switch on or off - Standby To switch on the TV: • Press B Power at the right side of the TV if the standby led is off. • Press B on the remote control if the standby led in on. To switch to standby: • Press B on the remote control. B POWER - PRO To switch on from standby without remote control: • Press B Power at the side of the TV to switch off first and press B Power again to switch on.
4.2 20-09-2007 08:28 Pagina 9 Watch TV 4.3 4.2.1 Switch channels ‡ To switch TV channels: • Press a number (1 to 999) or press P+ or Pon your remote control. • Press Program/Channel - or + on the side controls of the TV. ® Press R to return to the previously viewed TV channel . Watch channels from a digital receiver ENGLISH 2702.1 en ‡ Switch on the digital receiver. The picture from your receiver might appear automatically on your screen.
2702.1 en 4.5 20-09-2007 08:28 Pagina 10 Watch a DVD 4.6 ‡ Insert a DVD disc in your player. ® Press Play π. The picture from your player appears automatically on your screen. Select a Teletext page Most TV channels broadcast information via Teletext. To watch Teletext: ‡ Press b. The main index page appears. If the picture does not appear: ‡ Press v on the remote control.
4.7 20-09-2007 08:28 Pagina 11 Change Ambilight mode ENGLISH 2702.1 en You can choose among four Ambilight modes: • Colour Sets Ambilight to a constant colour. • Relaxed Sets Ambilight to change soft and smoothly with the images on screen. • Moderate Sets Ambilight between Relaxed and Dynamic. • Dynamic Sets Ambilight to change quick and responsive. To change the Ambilight mode: ‡ Press Ambilight to switch on or off.
2702.1 en 5 20-09-2007 08:28 Pagina 12 Use more of your TV This section deals with the more advanced use of your TV: • how to use the menus • to adjust the picture, sound and Ambilight settings • more about Teletext • how to create favourite channel lists 5.1 Remote control overview • • • • the advantages of Electronic Programme Guide how to set locks and timers to set subtitles and select a subtitle language how you can view your photos or play your favourite music from a USB memory device.
20-09-2007 08:28 Pagina 13 17 Volume up or down V To adjust the volume. 18 Menu To switch the menu on or off. 19 Option To switch the Quick access menu on or off. 20 Demo To switch the Demo menu on and to get a demonstration of the features of the TV. 21 Subtitles j To activate or deactivate the subtitle mode. 22 MHEG cancel (only for UK) To cancel only Digital text or Interactive services. 5.2 TV menu overview ENGLISH 2702.
2702.1 en 20-09-2007 08:28 Pagina 14 5.2.2 Use of the menu Learn to use the menus with this example. ‡ Press Menu on the remote control. a OPTION OK LIST MENU MENU b BROWSE BROWSE The main menu appears on the screen. Television TV menu Channel list Programme guide Multimedia ® Press π to enter the TV menu. º Press π to enter the picture settings.
2702.1 en 20-09-2007 08:28 Pagina 15 5.3 ‡ Press Option on the remote control. ® Press o or œ to select an option. Ò Press OK to show the selected option menu. † Press o, œ, p, π to adjust the settings in the menu. º Press Option to quit the menu. 5.3.1 Settings assistant Use the Settings assistant to guide you through basic picture, sound and Ambilight settings in an easy way. ‡ Press Menu on the remote control and select TV menu > TV settings > Settings assistant and press π to enter. ® Press OK.
2702.1 en 20-09-2007 08:28 Pagina 16 5.3.3 Picture settings This section describes how to adjust all picture settings. ‡ Press Menu on the remote control and select TV menu > TV settings > Picture and press π to enter the list. ® Press o or œ to select a setting. TV settings Picture Settings assistant Reset to standard Contrast Brightness Picture Colour Sound Hue Ambilight Sharpness Tint Perfect Pixel HD HD Natural Motion 100 Hz Clear LCD Dynamic contrast Noise reduction MPEG artefact red.
20-09-2007 08:28 Pagina 17 Unscaled (Only for HD and PC.) Maximum sharpness. Distortion may appear on borders. Black bars may appear with pictures from your PC. 5.3.4 Widescreen picture format Avoid black bars on the sides or on top and bottom of the picture. Change the picture format to a format that fills the screen. ‡ Press q to switch on the Picture format menu. v q j MHEG CANCEL b q DEMO GUIDE a OPTION ENGLISH 2702.1 en rNote Do not forget to name the connection in the Connection menu.
2702.1 en 20-09-2007 08:28 Pagina 18 • Audio language A list of audio languages for the current programme may be available when digital channels are installed and broadcasted. See also section 5.2.3 Quick access menu. To permanently change the audio language, see section 6 Channel installation. • Dual I/II If broadcasted, you can choose between two different languages. • Mono/stereo If stereo broadcasting is available, you can select Mono or Stereo per TV channel.
20-09-2007 08:28 Pagina 19 TV standby with Ambilight When the TV is standby, you can switch Ambilight on. In this case Ambilight is only available as constant colour. ‡ Press Ambilight on the remote control when the TV is in standby. ® Press Mode repeatedly to select an available colour. i Ambilight 5.5 0 Ambilight MODE 5.5.3 Dual screen teletext (Not available for channels with Digital text services. View the TV channel and teletext next to each other. ‡ Press b for Dual screen teletext.
2702.1 en 20-09-2007 08:28 Pagina 20 5.5.6 Teletext menu With the options in the teletext menu you can reveal hidden info, let cycle subpages automatically and change the character setting. • Reveal Hide or unhide hidden information on a page, such as solutions to riddles or puzzles. • Cycle subpages If subpages are available for the selected page, you can make subpages cycle automatically. • Language Some languages use a different set of characters. Switch to the other group to show the text correctly.
20-09-2007 08:28 Pagina 21 5.6.2 To set up a favourite list Create or modify your own favourite list. ‡ Press OK. The last selected list appears. ® Press the red key to show all favourite lists. Ò Press o or œ to select a list. † Press OK. º Press the green key to enter the Edit mode. The selected list brings up a full channel list. ◊Press o or œ to highlight a channel. ‹ Press OK to mark (or unmark) the highlighted channel. The channel is added to (or removed from) the selected list.
2702.1 en 20-09-2007 08:28 Pagina 22 Or ‘7 or 8 day’ EPG It may take some time to receive the EPG data. The list of TV programmes will show Programme guide 09:55 Next BBC ONE 07:50 Commonwealth 12:30 Commonwealth BBC TWO 09:50 Tweenies 10:15 Something Special five 09:00 The Wright Stuff 10:30 Trisha Goddard 12:00 This is BBC THREE BBC THREE 05:32 This is BBC THREE BBC FOUR 05:32 This is BBC FOUR abc1 09:20 Moonlighting Watch 12:00 This is BBC FOUR 10:15 Daddio Jump to ...
20-09-2007 08:28 Pagina 23 Did you forget your code ? ‡ Select Change code. ® Press π. Ò Enter the overriding code 8-8-8-8. † Enter a new personal code. º Confirm your new entered code. The previous code is erased and the new code is stored. 5.8.
2702.1 en 20-09-2007 08:28 Pagina 24 5.9.2 Activate or deactivate subtitling ‡ Press Menu on the remote control and select TV menu > Features > Subtitle and press π to enter the list. TV menu Features TV settings Features Subtitle Subtitle language Installation Sleeptimer Software update Child lock Set/Change code On timer 5.10 View and play: photos, MP3, ... Watch pictures or listen to music stored on a USB device (not supplied with the TV).
Afrika_2001 Afrika_2001 Paris_2005 My_car.jpg Jean.jpg Kenya.jpg Congo.jpg Victoria.jpg Mary.jpg Cairo.jpg Afrika_2001 Pagina 25 Afrika_2001 Kenya.jpg Congo.jpg Victoria.jpg Dakar.jpg Kenya.jpg 5.10.4 Thumbnails View the pictures of a selected album in an overview. ‡ Select a picture album. ® Press π to enter the picture list. Ò Press the green key. † Press o or œ, p or π to highlight a picture. º Press OK to view the picture. ◊Press p to return to the thumbnail overview.
2702.1 en 20-09-2007 08:28 Pagina 26 5.11 Listen to radio channels If digital broadcasting is available, digital radio channels will be installed during installation. To listen to a digital radio channel: ‡ Press OK on the remote control. The All channels menu is displayed. ® Use the number keys to select a radio channel available from channel number 400 onwards. To reorder see section 6.3.3 Reorder the channels. Ò Press OK. 5.12 Software update Philips continuously tries to improve its products.
20-09-2007 08:28 Pagina 27 ® The TV switches off. The screen stays black for about 10 seconds. Wait and do not use the power switch B on the TV. rNote Do not press more than once and do not use the Power B switch on the TV. ENGLISH 2702.1 en ◊The TV switches off.The screen stays black for about 10 seconds. Please, wait. Ò The update process starts automatically. Please wait. ‹The TV switches back on again.The update is done.
2702.1 en 6 20-09-2007 08:28 Pagina 28 Channel installation The first time you switched on your TV you’ve selected the language of the TV menus and allthe available channels have been installed. This chapter will help you if you find it necessary to re-do the initial installation or if you want to tune in a new analogue TV channel. rNotes: - You do not have to follow every step described if it is not necessary.
20-09-2007 08:28 Pagina 29 6.2 Analogue: Manual installation You can tune-in analogue TV channels channel by channel manually with Manual installation. 6.2.1 Select the system ‡ Press Menu on the remote control and select TV menu > Installation > Channel installation > Analogue: Manual installation. ® Press π to enter the Manual installation menu. System is highlighted. Ò Press π to enter the System list. † Press o or œ to select your country or part of the world where you are now located.
2702.1 en 20-09-2007 08:28 Pagina 30 6.3.2 Uninstall or reinstall a channel To uninstall a stored channel so that it is no longer possible to tune to. Reinstall an earlier uninstalled channel. ‡ Press Menu on the remote control and select TV menu > Installation > Channel installation > Rearrange. ® Press π to enter the channel list. Ò Press o or œ in the channel list to select the channel you want to uninstall or reinstall. † Press the green key to uninstall or reinstall the channel.
2702.1 en 20-09-2007 08:28 Pagina 31 Connections 7.1 Connection overview 3 2 ENGLISH 7 1 USB Y 16 Pb 15 14 13 Pr AUDIO L/R EXT 3 EXT 2 L VIDEO EXT 1 12 4 5 L R COMMON INTERFACE AUDIO OUT DISPLAY SYNCHRONIZED 6 7 8 9 HDMI 1 HDMI 2 S-VIDEO 10 11 OUT IN DIGITAL AUDIO Back connectors 1 EXT1 Scart connector for DVD,VCR, digital receiver, game console, etc. 2 EXT2 Second scart connector.
2702.1 en 7.2 20-09-2007 08:28 Pagina 32 About connecting Learn here how to make the best connection for your device. Six connections are ready to use at the back of the TV - EXT1, EXT2, EXT3, HDMI1, HDMI2 and HDMI3. Connect your device with the highest possible quality connection. Look for the highest quality connection on your device. Use that connection to your TV. Connection set up When connecting is done the TV needs to know what connections you made, which device is connected to which connector.
20-09-2007 08:28 Pagina 33 7.2.4 Scart - Good quality ★★★ One cable combines video and audio signals. Scart connectors can handle RGB video but no HD TV signals. 7.2.7 Display synchronised audio out For the best match of image and sound in speech on screen, connect a Home Theatre System to Audio L/R or Digital Audio outputs. See diagrams 7.3.4 and 7.3.8. Do not connect the audio signal of a DVD player, digital receiver or other audio/video device directly to the Home Theatre System. Scart cable 7.2.
2702.1 en 7.3 20-09-2007 08:28 Pagina 34 Connect your devices The connections shown in this section are recommendations for the most used cases. Other solutions may be possible. 7.3.1 DVD player Use a scart cable to connect the device to the EXT1 input at the back of the TV. Y Pb Pr AUDIO L/ R EXT 3 L R AUDIO OUT EXT 2 EXT 1 OUT IN DIGITAL AUDIO HDMI 1 HDMI 2 HDMI 3 ANTENNA DVD Player 7.3.2 DVD Recorder or Digital Receiver Use a scart cable and 2 antenna cables.
2702.1 en 20-09-2007 08:28 Pagina 35 DVD Recorder and Home Theatre System Use a scart cable, 2 antenna cables and 1 digital audio (cinch) cable. ENGLISH 7.3.4 Y Pb Pr AUDIO L/ R DIGITAL AUDIO OUT L EXT 2 EXT 1 OUT R AUDIO OUT EXT 3 IN DIGITAL AUDIO HDMI 1 HDMI 2 HDMI 3 ANTENNA OUT DIGITAL AUDIO IN IN DVD Recorder Home Theatre System 7.3.5 DVD Recorder and DVD Home Theatre System Use 2 scart cables, 2 antenna cables and 1 digital audio (cinch) cable.
2702.1 en 20-09-2007 08:28 Pagina 36 7.3.7 HD Digital receiver / HD satellite receiver Use a HDMI cable and 2 antenna cables. Y Pb Pr AUDIO L/ R EXT 3 L R AUDIO OUT EXT 2 EXT 1 HDMI OUT OUT IN OUT IN DIGITAL AUDIO HDMI 1 HDMI 2 HDMI 3 ANTENNA HD Digital receiver / HD Satellite receiver 7.3.8 DVD-R, Home Theatre System and Digital receiver Use 3 scart cables, 3 antenna cables and 1 audio (cinch) cable.
20-09-2007 08:28 Pagina 37 7.3.10 Game console The most practical connection for a game console is at the side of the TV. More qualitative connections are at the back of the TV. Connected at the side of the TV Use the Video and Audio L/R (cinch) connectors. USB R AUDIO L VIDEO S-VIDEO 7.3.12 Personal Computer The best connection for a PC is at the back of the TV. A more practical connection, but only for viewing photos and films from your PC, is the connection at the side of the TV.
2702.1 en 7.4 20-09-2007 08:28 Pagina 38 Connections setup When all devices have been connected the TV needs to know what connections you have made, which device is connected to which connector. 7.4.1 Digital Audio In (if present) If you use the Digital Audio In connection, assign this connection, in the menu, to the device from where the sound comes from. ‡ Press Menu on the remote control and select TV menu > Installation > Connections > Digital Audio In. ® Press π to enter the list.
7.5 20-09-2007 08:28 Pagina 39 Preparing for digital services ENGLISH 2702.1 en Scrambled digital TV channels can be decoded with a Conditional Access Module (CAM) and a Smart card provided by a digital TV service operator. The CAM may enable several services depending on the operator you choose (e.g. Pay TV). Contact your digital TV service operator for more information and terms. 7.5.1 Insert a Conditional Access Module CAM ) Warning Switch off your TV before inserting a CAM.
2702.
9 20-09-2007 08:28 Pagina 41 Troubleshooting No digital channels found during installation • Verify if the TV supports DVB-T in your country. See the list of countries on the TV typeplate. Television and remote control Picture The TV does not switch on • Verify the mains cord connection. • Verify if the batteries of the remote control are flat or weak. Verify their + / - orientation. You can use the keys on the TV to switch the TV on.
2702.1 en 20-09-2007 08:28 Pagina 42 Sound There is a picture but no sound • Verify the volume is not set to 0. • Verify the sound has not been muted with the ¬ key. • Verify if all cables are connected properly. • If no sound signal is detected, the TV automatically switches off the sound. This is proper operation and does not indicate malfunction. The sound is poor • Verify if the sound is set to Stereo. • Verify the Equalizer settings.
2702.
2702.
