2670.2 aus -AL 09-10-2007 11:03 Pagina 1 1 1.1 1.2 1.3 Important 3 Safety 3 Care of the screen 3 Recycling 3 2 2.1 2.2 Your TV 4 Television overview 4 Product highlights 5 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Getting started 5 Position the TV 5 Wall mounting 6 VESA 8 Remote control batteries 9 Antenna cable 9 Connect the mains 10 First time installation 10 4 4.1 4.2 4.3 4.4 4.5 4.
670.2 aus -AL 09-10-2007 11:03 2007 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
1 09-10-2007 11:03 Pagina 3 Important Read this user manual before you start to use this product. Pay attention to this section and closely follow the instructions. The warranty does not apply to damage caused by not taking into account the instructions. • Stationary images Avoid stationary images as much as possible. If you can not, reduce screen contrast and brightness to prevent damage to the screen. Stationary images are images that remain on the screen for a long time.
2670.2 aus -AL 2 09-10-2007 11:03 Pagina 4 Your TV This section gives you an overview of the controls and functions of this TV. 2.
2.2 09-10-2007 11:03 Pagina 5 Product highlights Your new TV is equipped with some of the most modern audio or video innovations. Your TV offers the following advantages ... Full High Definition LCD display (52PFL9432D) A full HD resolution of 1920x1080p, the highest resolution HD broadcast can transmit. It offers a brilliant flicker-free progressive scan picture with optimum brightness and superb colours.
2670.2 aus -AL 3.2 09-10-2007 11:03 Pagina 6 Wall mounting Only for 52PFL9432D/79 You can wall mount the TV with the supplied wall mount bracket. 3.2.1 Unmounting the TV stand The TV stand should be unmounted from the TV to allow the TV to be wall mounted. ‡ Unscrew the 2 screws that secure the stand to the TV. 3.2.2 Mounting the wall mount bracket ) Caution Wall mounting the TV requires special skills that should only be performed by qualified personnel.
09-10-2007 † Mount the 2 spacers at the back of the TV. 11:03 Pagina 7 on the 2 lower discs ‹ Connect all cables. See section 7 Connections. ENGLISH 2670.2 aus -AL ≈Lift the TV into the wall mount bracket. º Calculate your TV’s ideal position. 1290mm 320 835 mm 252 52" 2 42 kg Ú Secure the TV in the bracket by screwing in the 2 already fitted screws . ◊Position and level the wall mount bracket and fix the bracket firmly to the wall.
2670.2 aus -AL 3.3 09-10-2007 11:03 Pagina 8 VESA compliant mounting 3.3.1 32PFL9432D ) Caution Use a VESA compliant bracket that meets safety standards according to the TV’s weight. Closely follow the instructions that come with your VESA compliant bracket to mount the TV. Koninklijke Philips Electronics N.V. bears no responsibility for improper mounting or mounting that results in accident or injury. The TV is prepared for VESA compliant mounting. This bracket is not included.
3.4 09-10-2007 11:03 Pagina 9 Remote control batteries 3.5 Antenna cable ‡ Locate the antenna connection at the back of the TV. ® Insert the antenna cable tightly into the antenna socket x Antenna. ‡ Open the battery cover on the back of the remote control. ® Insert the 2 batteries supplied (Type AA-R61,5V). Make sure the + and - ends of the batteries line up correctly (inside of case is marked.) Ò Close the cover.
2670.2 aus -AL 3.6 09-10-2007 11:03 Pagina 10 Connect the mains cord ‡ Verify that your mains voltage corresponds with the voltage printed on the sticker at the back of the TV. Do not insert the mains cord if the voltage is different. ® Insert the mains cord tightly. The TV is never powered off completely unless the mains cord is physically unplugged. Therefore the mains plug must be accessible at all time. 3.
4 09-10-2007 11:03 Pagina 11 Use your TV Learn how to operate your TV for daily use. 4.1 Switch on or off - Standby ENGLISH 2670.2 aus -AL To switch on the TV: • Press B Power at the left side of the TV if the standby led is off. • Press B on the remote control if the standby led in on. To switch to standby: • Press B on the remote control.
2670.2 aus -AL 4.2 09-10-2007 11:03 Pagina 12 Watch TV 4.3 Watch channels from a digital receiver ® 4.2.1 Switch channels ‡ To switch TV channels: • Press a number (1 to 999) or press P+ or Pon your remote control. • Press Program/Channel - or + on the side controls of the TV. ® Press 0 to return to the previously viewed TV channel . ® ® ® ® MENU b + + V ¬ - ‡ Switch on the digital receiver. The picture from your receiver might appear automatically on your screen.
4.5 09-10-2007 11:03 Watch a DVD Pagina 13 4.6 ® ‡ Insert a DVD disc in your player. ® Press Play π. The picture from your player appears automatically on your screen. ® ® ® Select a Teletext page Most TV channels broadcast information via Teletext. To watch Teletext: ‡ Press b. The main index page appears. If the picture does not appear : ‡ Press AV v on the remote control. ® ® 4 5 6 7 8 9 0 0 ENGLISH 2670.
2670.2 aus -AL 09-10-2007 11:03 Pagina 14 5 Use more of your TV This section deals with the more advanced use of your TV: • how to use the menus • to adjust the picture and sound settings • more about Teletext • how to create favourite channel lists 5.1 Remote control 5.1.1 Remote control overview • • • • 1 Standby B To switch the TV on or back to standby.
09-10-2007 11:03 Pagina 15 17 Menu To switch the menu on or off. 18 Option To switch the Quick access menu on or off. 19 Demo To switch the Demo menu on and to get a demonstration of the features of the TV. 20 On screen information i To show channel or programme information if available. 5.2 TV menu overview ENGLISH 2670.2 aus -AL With the on screen menus you install your TV, adjust picture and sound settings and access features.
2670.2 aus -AL 09-10-2007 11:03 Pagina 16 5.2.2 Use of the menu Learn to use the menus with this example. ‡ Press Menu on the remote control. º Press navigation key right to enter the picture settings. Picture a OPTION ® ® ® BROWSE OK ® Contrast Contrast Brightness 90 47 Colour Hue 52 0 Sharpness 4 ® BROWSE MENU MENU b Tint + + P ... The main menu appears on the screen. ◊Press navigation key down to select Brightness.
2670.2 aus -AL 09-10-2007 11:03 Pagina 17 5.3 ‡ Press Option on the remote control. ® Press navigation key up or down to select an option. Ò Press OK to show the selected option menu. † Press navigation key up, down, left, right to adjust the settings in the menu. º Press Option to quit the menu. 5.3.1 Settings assistant Use the Settings assistant to guide you through basic picture and sound settings in an easy way.
2670.2 aus -AL 09-10-2007 11:03 Pagina 18 5.3.3 Picture settings This section describes how to adjust all picture settings. ‡ Press Menu on the remote control and select TV menu > TV settings > Picture and press navigation key right to enter the list. ® Press navigation key up or down to select a setting.
09-10-2007 11:03 Pagina 19 5.3.4 Widescreen picture format Avoid black bars on the sides or on top and bottom of the picture. Change the picture format to a format that fills the screen. ‡ Press Menu on the remote control and select TV menu > TV settings > Picture > Picture format and press navigation key right to enter the list. ® Press navigation key up or down to select an available picture format. Ò Press navigation key up to shift the picture upwards to make partly covered subtitles visible.
2670.2 aus -AL 09-10-2007 11:03 Pagina 20 • Audio language A list of audio languages for the current programme may be available when digital channels are installed and broadcasted. See also section 5.2.3 Quick access menu. To permanently change the audio language, see section 6 Channel installation. • Dual I/II If broadcasted, you can choose between two different languages. • Mono/stereo If stereo broadcasting is available, you can select Mono or Stereo per TV channel.
09-10-2007 11:03 Pagina 21 † Press OK to search a page which holds the highlighted word or number. º Press navigation key up until no word or number is highlighted to quit Search. 5.4.5 Enlarge teletext pages For a more comfortable reading, you can enlarge the teletext page. ‡ Press b and select a teletext page. ® Press Option on the remote control to enlarge the top part of the page. Ò Press Option again to view the enlarged lower part of the page.
2670.2 aus -AL 5.5 09-10-2007 11:03 Pagina 22 Create favourite channel lists View the All channels list or set up a Favourite list of your own with your preferred TV channels and radio stations. For example, each member of your family can create his or her own favourite list. 5.5.1 Select a favourite list Learn how to select one of the favourite channel lists. ‡ Press OK. The first time after you have finished the installation, the All channels list is shown.
5.6 09-10-2007 11:03 Pagina 23 Electronic Programme Guide - EPG - The Electronic Programme guide is an on screen guide to scheduled digital TV programmes. You can navigate, select and view programmes by time, title or genre. There are two types of EPG, ‘Now and Next’ and ‘7 or 8 day’ EPG. When digital channels are installed and broadcasted, EPG is available. ‘Now and Next’ is always available but the ‘7 or 8 day’ EPG is only available in some countries. With the EPG menu you can ...
2670.2 aus -AL 5.7 09-10-2007 11:03 Pagina 24 Timers and locks This section describes how to switch the TV on or off at a specified time and to lock or unlock the TV. 5.7.1 Automatically switch to standby Sleeptimer switches the TV to standby after a time. ‡ Press Menu on the remote control and select TV menu > Features > Sleeptimer and press navigation key right to enter the sleeptimer bar. ® Press navigation key up or down to set the time up to 180 minutes in steps of 5 minutes.
09-10-2007 11:03 Pagina 25 Lock one or more channels and connected devices ‡ Select Custom lock. ® Press navigation key right to enter. Ò Press navigation key up or down to select Channel lock. † Press navigation key right. º Press navigation key up or down to select the channel(s) you want to lock or unlock. ◊Each time press OK to lock or unlock the channel. Set an age rating to a digital programme Some digital broadcasters have their programmes rated (depending on your country).
70.2 aus -AL 09-10-2007 11:03 Pagina 26 ‡ Press Menu on the remote control and select TV menu > Features > Subtitle language and press navigation key right to enter the list of available languages. ® Press navigation key up or down to select a subtitle language. Ò Press OK. 5.9 View and play: photos, MP3, ... à Tip Select the Subtitle language menu directly with Option on the remote control. See section 5.2.3 Quick access menu.
Pagina 27 Ò Press navigation key up or down to select a picture or a picture album on the USB device. Picture Afrika_2001 Afrika_2001 Paris_2005 My_car.jpg Jean.jpg Kenya.jpg Congo.jpg Victoria.jpg Mary.jpg Cairo.jpg Afrika_2001 Afrika_2001 Kenya.jpg Congo.jpg Victoria.jpg Dakar.jpg Kenya.jpg 5.9.4 Thumbnails View the pictures of a selected album in an overview. ‡ Select a picture album. ® Press navigation key right to enter the picture list. Ò Press the green key.
2670.2 aus -AL 09-10-2007 11:03 Pagina 28 5.10 Listen to radio channels If digital broadcasting is available, digital radio channels will be installed during installation. To listen to a digital radio channel: ‡ Press OK on the remote control. The All channels menu is displayed. ® Use the number keys to select a radio channel. To reorder see section 6.3.3 Reorder the channels. Ò Press OK.
09-10-2007 11:03 Pagina 29 5.11 Software update 5.11.2 Software download from the PC Philips continuously tries to improve its products. It may be recommended for you to update the TV’s software. To update your TV software you need a USB Memory device (not supplied). ‡ Insert the USB memory device into a PC linked to the internet. ® Locate and open the file “update.htm” on your USB device. Ò Read the instructions on screen and click on the Send ID button.
2670.2 aus -AL 09-10-2007 11:03 Pagina 30 Ò The update process starts automatically. Please wait. ◊The TV switches off.The screen stays black for about 10 seconds. Please, wait. USB The update is finished when the message ‘Operation successful’ appears on the screen. Pr ‹The TV switches back on again.The update is done. g Operation Successful! Re USB † Remove the USB memory device from the TV. 5.11.
6 09-10-2007 11:03 Pagina 31 Channel installation The first time you switched on your TV you’ve selected the language of the TV menus and allthe available channels have been installed. This chapter will help you if you find it necessary to re-do the initial installation or if you want to tune in a new analogue TV channel. rNotes: - You do not have to follow every step described if it is not necessary.
2670.2 aus -AL 09-10-2007 11:03 Pagina 32 6.2 Analogue: Manual installation You can tune-in analogue TV channels channel by channel manually with Manual installation. 6.2.1 Select the system ‡ Press Menu on the remote control and select TV menu > Installation > Channel installation > Analogue: Manual installation. ® Press navigation key right to enter the Manual installation menu. System is highlighted. Ò Press navigation key right to enter the System list.
09-10-2007 11:03 Pagina 33 6.3.2 Uninstall or reinstall a channel To uninstall a stored channel so that it is no longer possible to tune to. Reinstall an earlier uninstalled channel. ‡ Press Menu on the remote conrol and select TV menu > Installation > Channel installation > Rearrange. ® Press navigation key right to enter the channel list. Ò Press navigation key up or right in the channel list to select the channel you want to uninstall or reinstall.
2670.2 aus -AL 09-10-2007 11:03 Pagina 34 7 Connections 7.1 Connection overview 3 2 1 12 Y USB 13 14 Pb Pr AUDIO L/R R AUDIO L 15 EXT 3 EXT 2 VIDEO EXT 1 S-VIDEO 16 4 5 L R COMMON INTERFACE AUDIO OUT DISPLAY SYNCHRONIZED 6 7 8 9 HDMI 1 HDMI 2 11 OUT IN DIGITAL AUDIO HDMI 3 SERVICE UART ANTENNA DISPLAY SYNCHRONIZED. Back connectors 1 EXT1 Scart connector for DVD,VCR, digital receiver, game console, etc. 2 EXT2 Second scart connector.
7.2 09-10-2007 11:03 Pagina 35 About connecting Learn here how to make the best connection for your device. Six connections are ready to use at the back of the TV - EXT1, EXT2, EXT3, HDMI1, HDMI2 and HDMI3. Connect your device with the highest possible quality connection. Look for the highest quality connection on your device. Use that connection to your TV. Connection set up When connecting is done the TV needs to know what connections you made, which device is connected to which connector.
2670.2 aus -AL 09-10-2007 11:03 Pagina 36 7.2.4 Scart - Good quality ★★★ One cable combines video and audio signals. Scart connectors can handle RGB video but no HD TV signals. 7.2.6 Video - Basic quality ★ Use a Video (cinch) cable together with an Audio L/R (cinch) cable. Match the cable colours when you connect Scart cable Combined Video - yellow and Audio L/R cable - red and white Use the supplied scart to cinch adaptor with the switch in the IN position to connect devices to EXT 1 or 2.
2670.2 aus -AL 11:03 Pagina 37 Connect your devices ENGLISH 7.3 09-10-2007 The connections shown in this section are recommendations for the most used cases. Other solutions may be possible. 7.3.1 DVD player Use a scart cable to connect the device to the EXT1 input at the back of the TV. Y Pb Pr AUDIO L/ R EXT 3 L EXT 1 OUT R AUDIO OUT EXT 2 IN DIGITAL AUDIO HDMI 1 HDMI 2 HDMI 3 ANTENNA DVD Player 7.3.2 DVD Recorder or Digital Receiver Use a scart cable and 2 antenna cables.
2670.2 aus -AL 09-10-2007 11:03 Pagina 38 7.3.4 DVD Recorder and Home Theatre System Use a scart cable, 2 antenna cables and 1 digital audio (cinch) cable. Y Pb Pr AUDIO L/ R DIGITAL AUDIO OUT L R AUDIO OUT EXT 3 EXT 2 EXT 1 OUT IN DIGITAL AUDIO HDMI 1 HDMI 2 HDMI 3 ANTENNA OUT DIGITAL AUDIO IN IN DVD Recorder Home Theatre System 7.3.5 DVD Recorder and DVD Home Theatre System Use 2 scart cables, 2 antenna cables and 1 digital audio (cinch) cable.
2670.2 aus -AL 09-10-2007 11:03 Pagina 39 HD Digital receiver / HD satellite receiver Use a HDMI cable and 2 antenna cables. ENGLISH 7.3.7 Y Pb Pr AUDIO L/ R EXT 3 L EXT 1 HDMI OUT OUT IN OUT R AUDIO OUT EXT 2 IN DIGITAL AUDIO HDMI 1 HDMI 2 HDMI 3 ANTENNA HD Digital receiver / HD Satellite receiver 7.3.8 DVD-R, Home Theatre System and Digital receiver Use 3 scart cables, 3 antenna cables and 1 audio (cinch) cable.
2670.2 aus -AL 09-10-2007 11:03 Pagina 40 7.3.10 Game console The most practical connection for a game console is at the side of the TV. More qualitative connections are at the back of the TV. Connected at the back of the TV Use a HDMI or the YPbPr (EXT3) input for HD quality. Connected at the side of the TV Use the Video and Audio L/R (cinch) connectors. 7.3.12 Personal Computer The best connection for a PC is at the back of the TV.
7.4 09-10-2007 11:03 Pagina 41 Connections setup When all devices have been connected the TV needs to know what connections you have made, which device is connected to which connector. 7.4.1 Digital Audio In (if present) If you use the Digital Audio In connection, assign this connection, in the menu, to the device from where the sound comes from. ‡ Press Menu on the remote control and select TV menu > Installation > Connections > Digital Audio In. ® Press navigation key right to enter the list.
2670.
9 09-10-2007 11:03 Pagina 43 Troubleshooting Television and remote control The TV does not switch on • Verify the mains cord connection. • Verify if the batteries of the remote control are flat or weak. Verify their + / - orientation. You can use the keys on the TV to switch the TV on. • Unplug the mains cord, wait for one minute and plug in the mains again. The TV does not react on the remote control • Verify if the batteries of the remote control are not empty or weak. Verify their + / - orientation.
2670.2 aus -AL 09-10-2007 11:03 Pagina 44 The picture position on screen is not correct • Some picture signals from some devices do not fit the screen correctly. You can shift the picture with the navigation key left, right or up,down on the remote control. Check the signal output of the device. Sound There is a picture but no sound • Verify the volume is not set to 0. • Verify the sound has not been muted with the ¬ key. • Verify if all cables are connected properly.
2670.
2670.2 aus -AL 09-10-2007 N Naming devices 41 Noise reduction 18 O OK key 14 On timer 24 P Perfect Pixel HD 18 Personal Computer connect 40 display resolutions 42 Photo viewer 26 Picture format 18 menu 18 Pixel Plus 18 Position the TV 5 Power 11 Programme up/down 14 11:03 Pagina 46 Standby 24 Super zoom 19 Stationary images 3 Stereo 20 Subtitle 25 shift 19 Switch on 11 T Table of Pages T.O.P 21 Technical data 42 Teletext 21 teletext 2.
