2690.1 en 18-09-2007 16:50 Pagina 1 1 1.1 1.2 1.3 Important 3 Safety 3 Care of the screen 3 Recycling 3 2 2.1 2.2 Your TV 4 Television overview 4 Product highlights 5 3 3.1 3.2 3.3 3.4 3.5 3.6 Getting started 6 Position the TV 6 Wall mounting - VESA 7 Remote control batteries 8 Antenna cable 8 Connect the mains 9 First time installation 9 4 4.1 4.2 4.3 4.4 4.5 4.
690.1 en 18-09-2007 16:50 2007 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
1 18-09-2007 16:50 Pagina 3 Important Read this user manual before you start to use this product. Pay attention to this section and closely follow the instructions. The warranty does not apply to damage caused by not taking into account the instructions. • Stationary images Avoid stationary images as much as possible. If you can not, reduce screen contrast and brightness to prevent damage to the screen. Stationary images are images that remain on the screen for a long time.
2690.1 en 2 18-09-2007 16:50 Pagina 4 Your TV This section gives you an overview of the controls and functions of this TV. 2.1 Television overview Back connectors 1 32” / 80 cm (32PFL7862D) 2 3 4 B POWER - PROGRAM + MENU - VOLUME + Side controls 5-6 1 2 3 4 5 6 Volume up and down Menu Program or Channel up and down Power switch Led indicator (Blue: On; Red: Standby) Remote control sensor 42” / 107 cm (42PFL7862D) Side connectors To connect the antenna, DVD, VCR or other device.
18-09-2007 16:50 Pagina 5 2.2 Remote control B 1 Product highlights ENGLISH 2690.1 en Your new TV is equipped with some of the most modern audio or video innovations. Your TV offers the following advantages ... DVD STB TV VCR AUX i Pixel Plus Offers perfect picture quality from any source. b SELECT DEMO 2 a OPTION ® OK ® 3 ® 100Hz LCD Results in superior sharpness of motion reproduction, better black level, high contrast with a flicker-free, quiet image and a larger viewing angle.
2690.1 en 3 18-09-2007 16:50 Pagina 6 Getting started This section helps you with the positioning and the first time installation of the TV. 3.1 Position the TV ) Warning Carefully read the safety precautions in section 1.1 Safety before you position the TV. Large screen TVs are heavy. Carry and handle the TV with at least two persons. Connect your devices first before you position your TV or mount it on the wall. The ideal viewing distance for watching TV is three times its diagonal screensize.
18-09-2007 16:50 Pagina 7 Unmount the TV stand ‡ Locate the 4 screws of the TV stand. 3.2.2 42” / 107 cm (42PFL7862D) Your TV is prepared for VESA compliant wall mounting. This bracket is not included. Use a VESA compliant bracket with code VESA MIS-F, 600, 400 M8. ENGLISH 2690.1 en ç Warning Consider the TV’s weight if you wall mount it. Improper mounting could result in severe injury or damage. Koninklijke Philips Electronics N.V.
2690.1 en 18-09-2007 16:50 Pagina 8 Ò To remove the TV stand locate the 4 screws of the TV stand. 3.3 Remote control batteries ‡ Open the battery cover on the back of the remote control. ® Insert the 2 batteries supplied (Type AA-R61,5V). Make sure the + and - ends of the batteries line up correctly (inside of case is marked.) Ò Close the cover. † Unscrew the 4 screws. rNote Remove the batteries if you don’t use the remote control for a long time. 3.
18-09-2007 3.5 16:50 Pagina 9 Connect the mains cord ‡ Verify that your mains voltage corresponds with the voltage printed on the sticker at the back of the TV. Do not insert the mains cord if the voltage is different. ® Insert the mains cord tightly. 3.6 First time installation The first time, and only the first time, the mains cord is inserted, the installation procedures starts up automatically. Follow the instructions on screen. Menu language Please select your language...
2690.1 en 4 18-09-2007 16:50 Pagina 10 4.2 Use your TV Learn how to operate your TV for daily use. 4.1 Switch on or off - Standby Watch TV 4.2.1 Switch channels ‡ To switch TV channels: • Press a number (1 to 999) or press P+ or Pon your remote control. • Press Program/Channel - or + on the side controls of the TV. ® Press 0 to return to the previously viewed TV channel . ® To switch on the TV: • Press B Power at the right side of the TV if the standby led is off.
® 2690.1 en 18-09-2007 16:50 Pagina 11 ® ® ® AV v 4 5 6 7 8 9 AV 0 0 v Ò π ‡ † MHEG CANCEL ® FAV Ò Press OK. † Press Play π. 4.6 ENGLISH If the picture does not appear : ‡ Press AV v on the remote control. Select a Teletext page Most TV channels broadcast information via Teletext. To watch Teletext: ‡ Press b. The main index page appears. ® Press AV v repeatedly to select the device. Wait a few seconds until the picture appears. Ò Press OK.
2690.1 en 5 18-09-2007 16:50 Pagina 12 Use more of your TV This section deals with the more advanced use of your TV: • how to use the menus • to adjust the picture and sound settings • more about Teletext • how to create favourite channel lists • the advantages of Electronic Programme Guide 5.1 Remote control 5.1.
18-09-2007 16:50 Pagina 13 15 AV v To select a connected device. 16 Volume up or down V To adjust the volume. 17 Menu To switch the menu on or off. 18 Option To switch the Quick access menu on or off. 19 Demo To switch the Demo menu on and to get a demonstration of the features of the TV. 20 On screen information i To show channel or programme information if available. 5.1.2 Operate Philips Audio/Video devices This TV remote control can operate most of the Philips Audio/Video devices.
2690.1 en 5.2 18-09-2007 16:50 Pagina 14 TV menu overview With the on screen menus you install your TV, adjust picture and sound settings and access features. This section gives an overview of the menus and describes how to navigate. 5.2.2 Use of the menu Learn to use the menus with this example. ‡ Press Menu on the remote control. a OPTION ® ® ® BROWSE 5.2.1 The menu ‡ Press Menu on the remote control to show the main menu. ® Press Menu to quit the menu.
18-09-2007 16:50 Pagina 15 º Press navigation key right to enter the picture settings. Picture Contrast Contrast Brightness 90 47 Colour Hue 52 0 Sharpness 4 5.2.3 Quick access menu The Quick access menu gives direct access to some often needed menu items. When digital channels are installed and broadcasted the relevant digital options are shown in the menu. ‡ Press Option on the remote control. ® Press navigation key up or down to select an option. Ò Press OK to show the selected option menu.
2690.1 en 5.3 18-09-2007 16:50 Pagina 16 Picture and Sound settings This section describes how to adjust picture and sound in the menus. 5.3.1 Settings assistant Use the Settings assistant to guide you through basic picture and sound settings in an easy way. ‡ Press Menu on the remote control and select TV menu > TV settings > Settings assistant and press navigation key right to enter. ® Press OK. Ò Press the green key on the remote control to start the assistant.
18-09-2007 16:50 Pagina 17 • Pixel Plus Enables or disables Pixel Plus, the most ideal picture setting. • HD Natural Motion Reduces the field and line flicker and reproduces smooth movement especially in movies. Set the level to Minimum, Maximum or Off. • 100 Hz LCD Switches 100 Hz LCD on or off. • Dynamic contrast Enhances the contrast in the picture as the image on the screen changes. Set the level to Minimum, Medium, Maximum or Off. The level medium is recommended.
2690.1 en 18-09-2007 16:50 Pagina 18 5.3.5 Sound settings This section describes how to adjust all sound settings. ‡ Press Menu on the remote control and select TV menu > TV settings > Sound and press navigation key right to enter the list. ® Press navigation key up or down to select a setting. TV settings Sound Settings assistant Equalizer Volume Reset to standard Picture Sound Balance Audio language Dual I/II Mono/Stereo Surround mode Headphone volume e Auto volume level...
5.4 18-09-2007 16:50 Pagina 19 Teletext Your TV has a 1200 pages memory that stores broadcasted teletext pages and subpages to reduce waiting time. To select a teletext page see section 4.6 Select a Teletext page. 5.4.1 Select pagenumber subpages A teletext page number can hold several subpages. The pages are shown on a bar next to the main pagenumber. ‡ Press b. ® Select a teletext page. Ò Press navigation key left or right to select a subpage. 5.4.2 Select T.O.P. teletext broadcasts T.O.P.
2690.1 en 18-09-2007 16:50 Pagina 20 5.5 ‡ Press b. ® Press Menu. Teletext menu Reveal Off Cycle subpages Off Language Gr. II Ò Press navigation key up or down to select an option. † Press OK to change a setting. º Press Menu to quit the teletext menu. ◊Press b to switch off teletext. 5.4.7 Digital text services (UK only) Some digital TV broadcasters offer dedicated digital text or interactive services (for example BBC1) on their digital TV channels .
18-09-2007 16:50 Pagina 21 5.5.3 Select a channel from a favourite list ‡ Press OK. The last selected channel list appears. ® Use navigation key up or down to highlight a channel. Ò Press OK. The TV tunes to that channel. 5.6.1 Switch on EPG ‡ Press a. ENGLISH 2690.1 en DVD STB TV VCR AUX i SELECT a OPTION à Tip • Use -P+ to go through the TV channels of the selected favourite list. • With the number keys you can still select channels which are not marked as favourite.
2690.1 en 18-09-2007 16:50 Pagina 22 5.6.2 More on ‘7 or 8 day’ EPG Search by genre, scheduled reminders, etc. are managed in the Programme guide menu. ‡ Press a on the remote control. ® Press Menu. The Programme guide menu appears. Programme guide What's on What's on 12:30 South Today 11:50 Working Lunch Search by genre Preferred EPG ch... 13:00 In aller Freund Acquire EPG data Ò Press navigation key up or down to select a menu option. † Press navigation key right to enter.
18-09-2007 16:50 Pagina 23 Did you forget your code ? ‡ Select Change code. ® Press navigation key right. Ò Enter the overriding code 8-8-8-8. † Enter a new personal code. º Confirm your new entered code. The previous code is erased and the new code is stored. 5.7.
2690.1 en 18-09-2007 16:50 Pagina 24 5.8.2 Activate or deactivate subtitling ‡ Press Menu on the remote control and select TV menu > Features > Subtitle and press navigation key right to enter the list. TV menu Features TV settings Features Subtitle Subtitle language Installation Sleeptimer Software update Child lock Set/Change code On timer 5.9 View and play: photos, MP3, ... Watch pictures or listen to music stored on a USB device (not supplied with the TV).
Afrika_2001 Afrika_2001 Paris_2005 My_car.jpg Jean.jpg Kenya.jpg Congo.jpg Victoria.jpg Mary.jpg Cairo.jpg Afrika_2001 Pagina 25 Afrika_2001 Kenya.jpg Congo.jpg Victoria.jpg Dakar.jpg Kenya.jpg Cairo.jpg † Press OK to view the picture or to start a slideshow of the pictures in the album. º Press OK to pause the slideshow. Press again to restart. ◊Press one of the colour keys on the remote control to perform the corresponding function shown at the bottom of the screen.
90.1 en 18-09-2007 16:50 Pagina 26 5.10 Listen to radio channels 5.11 Software update If digital broadcasting is available, digital radio channels will be installed during installation. To listen to a digital radio channel: ‡ Press OK on the remote control. The All channels menu is displayed. ® Use the number keys to select a radio channel available from channel number 400 onwards. To reorder see section 6.3.3 Reorder the channels. Ò Press OK. Philips continuously tries to improve its products.
18-09-2007 16:50 Pagina 27 5.11.2 Software download from the PC to the USB device ‡ Insert the USB memory device into a PC linked to the internet. ® Locate and open the file “update.htm” on your USB device. Ò Read the instructions on screen and click on the Send ID button. The software update is downloaded on the USB memory device. † Remove the USB memory device from your PC. ENGLISH 2690.1 en USB The update is finished when the message ‘Operation successful’ appears on the screen. 5.11.
2690.1 en 18-09-2007 16:50 Pagina 28 ‹The TV switches back on again.The update is done. 5.11.4 Verify the current software version Updating software is only possible if the version of the new available software is different from the current one.You can verify your current software version. ‡ Select Software update in the TV menu. ® Press navigation key right. Ò Press navigation key up or down to select Current software info. The version and the description of the current software appears. 5.11.
6 18-09-2007 16:50 Pagina 29 Channel installation The first time you switched on your TV you’ve selected the language of the TV menus and all the available channels have been installed. This chapter will help you if you find it necessary to re-do the initial installation or if you want to tune in a new analogue TV channel. rNotes: - You do not have to follow every step described if it is not necessary.
2690.1 en 18-09-2007 16:50 Pagina 30 6.2 Analogue: Manual installation You can tune-in analogue TV channels channel by channel manually with Manual installation. 6.2.1 Select the system ‡ Press Menu on the remote control and select TV menu > Installation > Channel installation > Analogue: Manual installation. ® Press navigation key right to enter the Manual installation menu. System is highlighted. Ò Press navigation key right to enter the System list.
18-09-2007 16:50 Pagina 31 6.3.2 Uninstall or reinstall a channel To uninstall a stored channel so that it is no longer possible to tune to. Reinstall an earlier uninstalled channel. ‡ Press Menu on the remote control and select TV menu > Installation > Channel installation > Rearrange. ® Press navigation key right to enter the channel list. Ò Press navigation key up or down in the channel list to select the channel you want to uninstall or reinstall.
2690.1 en 18-09-2007 16:50 Pagina 32 7 Connections 7.1 Connection overview 7.1.1 32” / 80 cm (32PFL7862D) 3 2 1 USB Y 16 Pb 15 14 13 Pr AUDIO L/R EXT 3 EXT 2 L VIDEO EXT 1 12 4 5 L R COMMON INTERFACE AUDIO OUT DISPLAY SYNCHRONIZED 6 7 8 9 HDMI 1 HDMI 2 S-VIDEO 10 11 OUT IN DIGITAL AUDIO Back connectors 1 EXT1 Scart connector for DVD,VCR, digital receiver, game console, etc. 2 EXT2 Second scart connector.
18-09-2007 7.1.2 16:50 Pagina 33 42” / 107 cm (42PFL7862D) 3 2 ENGLISH 2690.1 en 1 12 Y 13 14 Pb Pr VIDEO L AUDIO R AUDIO L/ R EXT 3 S-VIDEO 15 EXT 2 EXT 1 USB 16 4 5 L R COMMON INTERFACE AUDIO OUT DISPLAY SYNCHRONIZED 6 7 9 HDMI 1 HDMI 2 10 11 OUT IN DIGITAL AUDIO HDMI 3 SERVICE UART ANTENNA DISPLAY SYNCHRONIZED. Back connectors 1 EXT1 Scart connector for DVD,VCR, digital receiver, game console, etc. 2 EXT2 Second scart connector.
2690.1 en 7.2 18-09-2007 16:50 Pagina 34 About connecting Learn here how to make the best connection for your device. Six connections are ready to use at the back of the TV - EXT1, EXT2, EXT3, HDMI1, HDMI2 and HDMI3. Connect your device with the highest possible quality connection. Look for the highest quality connection on your device. Use that connection to your TV. Connection set up When connecting is done the TV needs to know what connections you made, which device is connected to which connector.
18-09-2007 16:50 Pagina 35 7.2.4 Scart - Good quality ★★★ One cable combines video and audio signals. Scart connectors can handle RGB video but no HD TV signals. 7.2.7 Display synchronised audio out For the best match of image and sound in speech on screen, connect a Home Theatre System to Audio Out L/R or Digital Audio output (if present). See diagrams 7.3.4 and 7.3.8. Do not connect the audio signal of a DVD player, digital receiver or other audio/video device directly to the Home Theatre System.
2690.1 en 7.3 18-09-2007 16:50 Pagina 36 Connect your devices The connections shown in this section are recommendations for the most used cases. Other solutions may be possible. 7.3.1 DVD player Use a scart cable to connect the device to the EXT1 input at the back of the TV. Y Pb Pr AUDIO L/ R EXT 3 L R AUDIO OUT EXT 2 EXT 1 OUT IN DIGITAL AUDIO HDMI 1 HDMI 2 HDMI 3 ANTENNA DVD Player 7.3.2 DVD Recorder or Digital Receiver Use a scart cable and 2 antenna cables.
2690.1 en 18-09-2007 16:50 Pagina 37 DVD Recorder and Home Theatre System Use a scart cable, 2 antenna cables and 1 digital audio (cinch) cable. ENGLISH 7.3.4 Y Pb Pr AUDIO L/ R DIGITAL AUDIO OUT L EXT 2 EXT 1 OUT R AUDIO OUT EXT 3 IN DIGITAL AUDIO HDMI 1 HDMI 2 HDMI 3 ANTENNA OUT DIGITAL AUDIO IN IN DVD Recorder Home Theatre System 7.3.5 DVD Recorder and DVD Home Theatre System Use 2 scart cables, 2 antenna cables and 1 digital audio (cinch) cable.
2690.1 en 18-09-2007 16:50 Pagina 38 7.3.7 HD Digital receiver / HD satellite receiver Use a HDMI cable and 2 antenna cables. Y Pb Pr AUDIO L/ R EXT 3 L R AUDIO OUT EXT 2 EXT 1 HDMI OUT OUT IN OUT IN DIGITAL AUDIO HDMI 1 HDMI 2 HDMI 3 ANTENNA HD Digital receiver / HD Satellite receiver 7.3.8 DVD-R, Home Theatre System and Digital receiver Use 3 scart cables, 3 antenna cables and 1 audio (cinch) cable.
18-09-2007 16:50 Pagina 39 7.3.10 Game console The most practical connection for a game console is at the side of the TV. More qualitative connections are at the back of the TV. 32” / 80 cm (32PFL7862D) ENGLISH 2690.1 en R AUDIO L VIDEO Connected at the side of the TV Use the Video and Audio L/R (cinch) connectors.
2690.1 en 18-09-2007 16:50 Pagina 40 Add an audio cable with a Stereo mini jack for sound. Connect the Stereo mini jack to EXT3 on the TV. 32” / 80 cm (32PFL7862D) EXT 3 - AUDIO L/R HDMI DVI AUDIO OUT DVI AUDIO OUT HDMI 42” / 107 cm (42PFL7862D) EXT 3 - AUDIO L/R HDMI 7.4 Connections setup When all devices have been connected the TV needs to know what connections you have made, which device is connected to which connector. 7.4.
18-09-2007 16:50 Pagina 41 7.4.3 Naming your devices Name the connected devices for easy selection and best signal handling. Assign the type of device (DVD, VCR, Game ...) to the connector you use for that device. ‡ Press Menu on the remote control and select TV menu > Installation > Connections > EXT1. ® Press navigation key right to enter the list. Ò Press navigation key up or down to select the type of device. † Press Menu to quit the menu.
2690.
9 18-09-2007 16:50 Pagina 43 Troubleshooting Television and remote control The TV does not switch on • Verify the mains cord connection. • Verify if the batteries of the remote control are flat or weak. Verify their + / - orientation. You can use the keys on the TV to switch the TV on. • Unplug the mains cord, wait for one minute and plug in the mains again. The TV does not react on the remote control • Verify if the batteries of the remote control are not empty or weak. Verify their + / - orientation.
2690.1 en 18-09-2007 16:50 Pagina 44 The picture position on screen is not correct • Some picture signals from some devices do not fit the screen correctly. You can shift the picture with the navigation key on the remote control. Check the signal output of the device. Sound There is a picture but no sound • Verify the volume is not set to 0. • Verify the sound has not been muted with the ¬ key. • Verify if all cables are connected properly.
2690.
2690.1 en 18-09-2007 16:50 N Naming devices 40 Noise reduction 17 O OK key 12 On timer 22 Pagina 46 Standby 12,22 Super zoom 17 Stationary images 3 Stereo 18 Subtitle 23 Switch on 10 T P Pixel Plus 17 Personal Computer connect 39 display resolutions 42 Photo viewer 24 Picture format 17 menu 16 Position the TV 5 Power 10 Programme up/down 12 Table of Pages T.O.P 19 Technical data 42 Teletext 19 teletext 2.