Flat Panel Television User Manual

24
Note
The TV restarts after the software update is
complete.
•
Change TV preferences
The [Preferences] menu allows you to
customise various features and functions.
1 Press ( Home ).
2 Select [Setup] > [Installation] >
[Preferences] .
[Location] Optimises TV settings for
your location - home or shop.
[Volume bar] Displays the volume
bar when adjusting the volume.
[Channel info.] Displays information
about the TV channel every time you
switch channels.
[EasyLink] Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
[Pixel Plus Link] Overrides the
settings of connected devices and
uses the settings of the TV.
[E-sticker] For shop mode only. Sets
the location of the e-sticker.
Start a TV demo
You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
When a demo is available, it is displayed in the
menu list.
1 Press DEMO .
2 Press or to select a demo.
3 Press OK to start the demo.
•
•
•
•
•
•
4 Follow the on-screen instructions to
download the TV identi cation  le to the
USB storage device.
Step 2 Download the latest software
1 Connect the USB storage device to a
computer with internet connection.
2 Locate and open the  le update.htm on
your USB storage device.
3 Read the on-screen instructions and click
the Send ID button.
If a new software is available, the update
is downloaded to the USB storage device.
4 Disconnect the USB storage device.
Step 3 Update the TV software
Caution
Do not disconnect the USB storage device
from the TV during the software update.
If a power failure occurs during the update, do
not remove the USB storage device from the
TV. The TV will continue the update as soon
as power comes back.
•
•
1 Connect the USB storage device to the
TV.
An on-screen message prompts you to
update your TV software.
2 Select [Update] .
3 Select [Start] .
4 Follow the on-screen instructions to
update the TV software.
Update using a USB device
Connect your USB device to the USB port at
the side of your TV.
1 If the software update screen does not
appear automatically, select [Setup] >
[Software update] > [Local updates]
> [USB] to update the TV software
manually.
2 Follow the on-screen instructions to
complete the update.
»
EN