Flat Panel Television User Manual

23
Upload a wallpaper picture from a
USB device
Before performing this procedure, be sure to
have available a USB storage device containing
the picture you intend to use as wallpaper.
1 Connect the USB storage device to the
TV.
The home menu appears with
[Browse USB] already highlighted.
2 Press OK.
3 Press to select a picture.
4 Press SCENEA to set the picture as
personalised wallpaper.
Update the TV software
Philips continuously tries to improve its
products and we recommend that you update
the TV software when updates are available.
Check www.philips.com/support for availability.
Update software (analogue
broadcasts)
Before performing this procedure be sure to:
Set aside some time to complete the
entire update.
Have available a USB storage device with
at least 64MB of storage space.
Have access to a computer with a USB
port and internet access.
Step 1 Download the TV identi cation  le
1 Press ( Home )
2 Select [Setup] > [Software update] >
[Update assistant] > [Action] .
3 Select [Start] .
»
•
•
•
Watch video from a USB device
1 In the USB content browser, press to
enter the [VIDEO] folder.
2 Press to select a video.
3 Press OK to play the video.
Use Scenea to display a
picture as TV wallpaper
You can use the Scenea feature to display a still
picture as wallpaper on your TV. This feature is
for home mode only.
Activate Scenea
Single-picture wallpaper
Press SCENEA on your remote control.
The default or pre-loaded picture is
displayed.
Note
To deactivate the wallpaper, press any remote
control button except , SOUND , and
PICTURE .
The wallpaper is also deactivated when you
connect a USB storage device to the TV or
start an EasyLink-compliant device through
one-touch play.
•
•
Wallpaper slide show
Make sure the wallpaper is not yet activated.
1 Connect a USB storage device to the TV.
2 Press SCENEA .
All pictures in the USB storage device
are displayed.
Note
The wallpaper display duration is determined
by the pre-de ned sleeptimer settings (see
‘Automatically switch the TV to standby
(sleeptimer)’ on page 19 ) . When sleeptimer is
off, the wallpaper is displayed for a maximum
of 120 minutes.
•
»
»
English
EN