Flat Panel Television User Manual

17
Summary of picture formats
The following picture settings can be
con gured.
Note
Depending on the format of the picture
source, some picture settings are not available.
•
[Super zoom] (Not for HD
and PC mode.) Removes
the black bars on the side
of 4:3 broadcasts. There is
minimal distortion.
[4:3] Shows the classic 4:3
format.
[Subtitle zoom] (Not
for HD and PC mode.)
Displays 4:3 pictures over
the full area of the screen,
with sub-titles visible. Part
of the top of the picture is
clipped off.
[Movie expand 14:9] (Not
for HD and PC mode.)
Scales 4:3 format to 14:9.
[Movie expand 16:9] (Not
for HD and PC mode.)
Scales 4:3 format to 16:9.
[Wide screen] Stretches
the classic 4:3 format to
16:9.
[Unscaled] For HD and PC
mode only, and in selected
models only. Allows
maximum sharpness.
Some distortion may
be present due to the
broadcaster’s systems.
Set your PC resolution to
wide screen mode for best
results.
[Dynamic backlight] Adjusts the
brightness of the TV backlight to
match lighting conditions.
[MPEG artifact reduction] Not
available in all models. Smoothes out
transitions on digital pictures. You
can switch this feature on or off.
[Colour enhancement] Makes
colours more vivid and improves the
resolution of details in bright colours.
You can switch this feature on or off.
[PC mode] Adjusts picture settings
when a PC is connected to the TV.
[Light sensor] Dynamically adjusts
picture settings to match lighting
conditions.
[Picture format] Changes the picture
format.
[Horizontal shift] Adjusts the picture
horizontally for PC-VGA or HD
input.
[Vertical shift] Adjusts the picture
vertically for PC-VGA or HD input.
Change picture format
1 Press FORMAT .
A picture format bar appears.
2 Press to select a picture format.
The selected picture format is
previewed.
•
•
•
•
•
•
•
•
»
»
English
EN