Register your product and get support at www.philips.
Informações Importantes Leia antes de ligar o aparelho 1. Leia e guarde estas instruções, tome cuidado com todos os alertas. 2. Não use este aparelho próximo à água, chuva ou umidade. 3. Limpe a tela e o gabinete com u mpano de algodão ou outro material que seja extremamaente macio, não utilize produtos quimicos. 4. Não toque, aperte ou esfregue a superfície da tela. 5. Limpe a tela imediatamente em caso de respingos ou condensação. 6. Não bloqueie qualquer uma das aberturas de ventilação.
INSTRUCCIONES DE SEGURIDAD IMPORTANTE Lea antes de operar el equipo 1. 2. 3. 4. 5. 6. 7. Lea estas instrucciones. Guarde estas instrucciones. Preste atención a todas las advertencias. Siga todas las instrucciones. No use este aparato cerca del agua. Límpielo solamente con un paño seco. No bloquee ninguno de los orificios de ventilación. Instálelo de acuerdo con las instrucciones de los fabricantes. 8.
Contents 1 Notice 3 2 Important 5 3 Your TV 7 7 8 9 TV controls Remote control Remote control usage 4 Use your TV Switch your TV on Switch your TV to standby Switch your TV off Switch channels Watch connected devices Adjust TV volume 5 Use more of your TV Access TV menus Add device to the home menu Rename devices from the home menu Remove devices from the home menu Change picture and sound settings Use the universal access menu Create and use list of favorite channels Use the Electronic Program Gu
1 Notice 2011 Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products.
2 Important Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
Risk of overheating! • Never install the TV in a confined space. Always leave a space of at least 4 inches or 10 cm around the TV for ventilation. Ensure curtains or other objects never cover the ventilation slots on the TV. Risk of injury, fire or power cord damage! • Never place the TV or any objects on the power cord. • Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable.
3 Your TV For xxPFL4xx6 Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your TV at www.philips.com/welcome. TV controls For xxPFL5xx6 1 a 2 3 4 +/-: Adjust volume. b (Power): Switch the TV on or off. c (Home): Access the home menu. d CH +/-: Switch channels. 1 2 3 4 For xxPFL3xx6 1 +/-: Adjust volume. a b (Home): Access the home menu. 2 c CH +/-: Switch channels. 3 d Power: Switch the TV on or off.
g Remote control • h +/• Adjust volume. 1 i 0-9 (Numeric buttons) • Select channels. 2 17 3 4 16 15 14 5 13 6 7 12 j EXIT • Exits a menu. k . (Dot) • Press the dot (.) for digital channels. l m • • 8 o 10 11 p • OPTIONS Access options for the current activity or selection. Return to the previous menu or exit a function. n OK • Confirm an entry or selection. 9 a Mute or restore audio. (Standby-On) Switch the TV on or to standby.
Remote control usage When you use the remote control, hold it close to the TV and point it at the remote control sensor. Make sure that the line-of-sight between the remote control and TV is not blocked by furniture, walls or other objects.
4 Use your TV For xxPFL3xx6 This section helps you perform basic TV operations. Switch your TV on • Press the power switch on the TV. »» There is a short delay before the TV responds. If the TV is in standby • Press (Standby-On) on the remote control. For xxPFL5xx6 Switch your TV to standby • Press (Standby-On) on the remote control again. »» The remote control sensor on the TV switches to red.
Switch your TV off • For xxPFL5xx6 and xxPFL4xx6 Press the power switch on the TV again. »» The remote control sensor on the TV switches off. »» For xxPFL5xx6, the TV no longer consumes energy. »» For xxPFL4xx6, xxPFL3xx6, and DesignLine Tilt, though the TV consumes very little power when in standby, energy continues to be consumed. When not in use for an extended period of time, disconnect the TV power cable from the power outlet or turn off the power switch.
Watch connected devices Adjust TV volume • Note Press +/- on the remote control. •• Before you select a device as a source, switch the device on. Select a device from the source list 1 2 3 Press SOURCE. • Press +/- on the TV. For xxPFL5xx6 and xxPFL4xx6 »» The source list appears. Press to select a device. Press OK to confirm your choice. »» The TV switches to the selected device. For xxPFL3xx6 To mute or unmute sound • • Press Press to mute the sound. again to restore the sound.
5 Use more of your TV Access TV menus 3 4 5 Menus help you to install channels, change picture and sound settings and access other features. Follow the onscreen instructions to add the device to the home menu. »» The device is displayed in the home menu. To watch the device, switch it on, then select it in the home menu. You can also select the device with the source button (see 'Select a device from the source list' on page 12). 1 Press . The menu screen appears.
Remove devices from the home menu If a device is no longer connected to the TV, remove it from the home menu. 1 2 3 4 5 Press . Select a device to remove. Use smart picture Use smart picture to apply pre-defined picture settings. 1 2 3 OPTIONS. Press Select [Remove device], then press OK. Select [Remove], then press OK. »» The selected device is removed from the home menu. Change picture and sound settings Change picture and sound settings to suit your preferences.
• • • • • • • • 14 [Color temperature]: Adjust the color balance in an image. [Custom color temp]: Customize color temperature setting. (Only available if [Color temperature] > [Custom] is selected) [Digital Crystal Clear]/[Pixel Plus]/[Pixel Plus HD]: Fine-tune each pixel to match surrounding pixels. This setting produces a brilliant, high-definition image. • [HD Natural Motion]: (For Pixel Plus HD) Minimize juddering effects and enhance picture smoothness.
[Wide screen]: Scales 4:3 format to 16:9. [Unscaled]: For HD and PC mode only, and in selected models only. Allows maximum sharpness. Some distortion may be present due to the broadcaster's systems. Set your PC resolution to wide screen mode for best results. [16:9 stretch]: Shows widescreen format content unstretched. Manually adjust sound settings 1 2 3 • • • • • • • Use smart sound • Use smart sound to apply pre-defined sound settings. • 1 2 3 Press ADJUST. Select [Smart sound], then press OK.
Use the universal access menu You can activate the universal access menu during first time installation. Once enabled, you can quickly access the universal access menus when watching TV or external devices. 1 2 3 While you watch TV, press OPTIONS. »» The TV options menu appears. Select one of the following options, then press OK. • [Key beep]: Switch on audio feedback when buttons are pressed on the remote control or TV.
• Use the Electronic Program Guide The program guide is an on-screen guide available for digital channels. It allows you to: • View a list of digital programs being broadcast • View upcoming programs • Group programs by genre • Set reminders when programs start • Setup preferred program guide channels Switch on EPG 1 2 Press . Select [Program guide], then pressOK. »» The program guide appears displaying information about the scheduled programs.
Display the TV clock 1 2 3 While you watch TV, press OPTIONS. »» The options menu is displayed. Select [Clock]. »» The clock is displayed. Press OK. Automatically switch the TV to standby (sleep timer) Sleep timer switches the TV to standby after a pre-defined duration. Tip •• You can switch off your TV earlier or reset the sleep timer during the countdown. Note •• To disable the clock, repeat the procedure. Change the clock mode 1 2 3 Press .
Set age ratings Some digital broadcasters rate their programs according to age. You can set your TV to display only programs with age ratings lower than your child’s age. 1 2 3 4 5 Press . 4 5 Press Press 3 Repeat the process to lock or unlock more channels. To activate the locks, switch the TV on and off. »» When you switch channels with CH - or CH +, the locked channels are skipped. to exit. . Select [Setup] > [Channel settings] > [Child lock] > [Content ratings lock].
Customize the Scenea picture Change audio language You can load another picture as the wallpaper. You can choose an audio language if it is available from your broadcaster. For digital channels, multiple languages may be available. For analog channels, two languages may be available. Note •• When you load a new Scenea picture, it overrides the current Scenea picture. •• To use another picture as the wallpaper, you need a USB storage device that contains a picture that is less than 1 MB in size.
Play photos, music, and videos on USB storage devices Caution •• Philips is not responsible if the USB storage device is not supported, nor is it responsible for damage or loss of data from the device. Change slide show settings 1 2 Connect a USB storage device to play photos, music, or videos stored on it. 1 2 3 4 Switch on the TV. Connect the USB device to the USB port on the side of your TV. Press . Select [Browse USB], then press OK. »» The USB browser appears.
Change music settings • While you play music, press OPTIONS to access one of the following settings, then press OK. • [Stop playback]: Stop music. • [Repeat]/[Play once]: Play repeatedly or once. • [Shuffle on]/[Shuffle off] : Play sequence or at random. • [Show info]: Display the file name. Watch video 1 2 3 In the USB browser, select [Video], then press OK. Press OK to play. To control play, press the play buttons: • to play. • to pause. • or to play the previous or next video.
Step 2: Download and update the latest software version 1 2 3 4 5 6 7 Connect a USB storage device. Press Select [Setup] > [Update software]. • Follow the instructions to load a file onto your USB storage device. • Connect the USB storage device to your computer, then double-click the file. »» A Web page is launched. Follow the instructions in the Web page. • If the current software version matches the latest software update file, you do not need to update your TV software.
6 Install channels The first time you setup your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). Afterward, you can re-install and fine tune channels. Automatically install channels You can search and store channels automatically. 1 2 3 4 5 6 Press . Select [Setup] > [Search for channels], then press OK. Select [Reinstall channels], then press OK. Select a connection, then press OK. »» The channel installation guide begins.
Test digital reception You can check the quality and signal strength of digital channels. This allows you to reposition and test your antenna or satellite dish. 1 2 3 4 5 Press . Select [Setup] > [Channel settings] > [Channel installation] >[Digital: Reception test] , then press OK. Enter the channel to test, then press OK. Select [Search], then press OK. When the channel is found, select [Store], then press OK.
7 Connect devices This section describes how to connect devices with different connectors. For the location of these connectors on your TV, see the quick start guide. More examples of connections with other devices are provided in the Quick Start Guide. Note •• You can use different types of connectors to connect a device to your TV. Tip •• After connection, for easy access to your device, add it to the home menu: press device].
Underside connectors a CVI 2 (Y Pb Pr and AUDIO L/R) Analog audio and video input from analog or digital devices such as DVD players or game consoles. c HDMI 2 (for selected models) Digital audio and video input from highdefinition digital devices such as Blu-ray players. Connections via DVI or VGA require an additional audio cable (see 'Connect a computer' on page 29). d ANTENNA Signal input from an antenna or cable.
Side connector a USB Data input from USB storage devices. c HDMI Digital audio and video input from highdefinition digital devices such as Blu-ray players. Connections via DVI or VGA require an additional audio cable (see 'Connect a computer' on page 29). b AV IN (VIDEO and AUDIO L/R) Analog audio and video input from analog or digital devices such as DVD players, satellite receivers and VCRs. Connections via DVI or VGA require an additional audio cable (see 'Connect a computer' on page 29).
DVI-HDMI cable • Use Philips EasyLink AUDIO IN LEFT/RIGHT VGA/DVI DVI HDMI cable and HDMI-DVI adaptor • Get the most out of your HDMI-Consumer Electronic Control (CEC) compliant devices with Philips EasyLink enhanced control features. If your HDMI-CEC compliant devices are connected through HDMI, you can control them at the same time with your TV remote control.
Use one-touch play control If you connect multiple HDMI-CEC devices that support this setting, all such devices respond to the play control buttons on this TV remote control. 1 2 3 Caution •• This is an advanced setting. Devices that do not support this setting will not respond to the TV remote control. 1 2 3 Press . Select [Setup] > [TV settings] > [EasyLink] > [EasyLink remote control]. Select [On] or [Off], then press OK.
Maximize display for subtitled video 4 Some subtitles can create a separate subtitle bar under the video, which limits the video display area. After you switch on auto subtitle shift, the subtitles display over the video image, which maximizes the video display area. 1 2 Press . Select [Setup] > [TV settings] > [EasyLink] > [Auto subtitle shift] > [On], then press OK.
8 Product information Product information is subject to change without notice. For detailed product information, go to www.philips.com/support.
Before you mount, perform these steps: 1 2 3 To prevent damage to cables and connectors, leave a clearance of at least 2.2 inches or 5.5cm from the back of the TV. For selected models, remove the wall mount plugs from the back of the TV.
9 Troubleshooting This section describes commonly encountered issues and accompanying solutions. General TV issues The TV does not switch on: •• Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. •• Check that the power cable is securely connected. The remote control is not working properly: •• Check that the remote control batteries are correctly inserted according to the +/orientation. •• Replace the remote control batteries if they are flat or weak.
There is poor picture quality from connected devices: •• Check that the devices are connected properly. •• Check that the picture settings are correctly set. The TV did not save your picture settings: • Check that the TV location is set to the home setting. This mode offers you the flexibility to change and save settings. The picture does not fit the screen; it is too big or too small: •• Try using a different picture format.
10 Index E A analog channels closed captions language, change audio language C care channels antenna connection, select ca favourites hide or unhide install (automatic) rename switch update child lock clock closed captions computer, see PC connect connect device connect, PC connect, USB controls D demo devices add watch digital channels closed captions language, change dimensions display, wallpaper 36 EN 21 21 21 6 25 25 17 17 25 25 11 25 19 18 21 29 27 29 22 7 24 13 12 21 21 34 20 EasyLink con
M multimedia multimedia, play files mute TV speakers P PC, display resolutions picture format picture settings Pixel Plus link position the TV power R recycle reinstall TV remote control onscreen rename channels S Scenea, see screen saver Scenea, switch on screen care screen saver settings assistant picture sound shop mode sleeptimer smart picture smart sound software USB update version sound settings specifications standby switch switch TV on or off 22 22 31 T troubleshoot 35 U universal acces
38 EN EN 5
