Register your product and get support at www.philips.com/support EN User Manual ES Manual del Usuario 32PFL3509 EN For further assistance, call the customer support service in your country. To obtain assistance, contact Philips Customer Care Center at • México D.F.
.English Contents 1 Notice ......................................................................................................................... 5 2 Important ................................................................................................................ 6 Positioning the TV Regulatory Notices Environmental Care Preparing to Move/Ship the Unit 6 6 6 6 3 Getting Started ...............................................................................................
.English Know these safety symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear or bottom of the cabinet.
Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
1 Notice 5 .English Copyright All other registered and unregistered trademarks are the property of their respective owners. Trademarks are the property of Koninklijke Philips N.V. or their respective owners. P&F Mexicana reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
2 Important 6 .English Environmental Care Positioning the TV • • • • • • • • • • • • Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV. Make sure to hold the upper and bottom frames of the Unit firmly as illustrated. Install the Unit in a horizontal and stable position. Do not install the Unit in direct sunlight or in a place subject to dust or strong vibration. Depending on the environment, the temperature of this Unit may increase slightly.
3 Getting Started 7 .English Supplied Accessories Quick Start guide User Manual Features ● DTV / Analog TV / CATV You can use your Remote Control to select channels which are Broadcast in Digital format and conventional Analog format. Also, Cable and Satellite subscribers can access their TV channels. ● Information display Remote Control and Batteries (AAA, 1.5V x 2) You can display the Title, contents (DTV only) and other information of the current program on the TV screen.
.English Attaching the Base You must attach the base to the Unit to have it as a table top Unit. Be sure the front and rear of the base match the proper direction. For large screen TVs, at least 2 people are required for these steps. 1 2 1 2 ×3 Note(s) ● ● ● ● ● Make sure to use a table which can support the weight of this Unit and is larger than this Unit. Make sure the table is in a stable location.
.English a B (POWER) Turns the TV On from Standby or Off to Standby. b EasyLink (HDMI CEC) buttons Remote Control a b q p o c d e f n g h m i K : Begins or Restarts the Disc Playback. F : Pauses the Disc Playback. C : Stops the Disc Playback. E/D : Searches Backward or Forward through the Disc. Note(s) ● You must set On in the Master EasyLink ( L p. 30) to operate the above functions. c SAP Selects Audio mode (MONO / STEREO / SAP) / Audio language. d Q (MENU) Displays the main menu.
.English Control Panel g a b f c d e a VOL J / K Adjusts the Volume. VOL J : Volume Down VOL K : Volume Up In the Menu screen, moves the Cursor Left ( J ) / Right ( K ). b CH H / I Selects a Channel in the Memorized Channel Ring (Low to High or High to Low). In the Menu screen, moves the Cursor Up ( H ) / Down ( I ). c MENU Opens the Main On-screen Menu. d SOURCE Selects Connected Devices. e B (POWER) Turns the TV On and Off (Standby mode).
.English Connecting Antenna or Cable / Satellite / IPTV Box Be sure your Antenna or another Device is connected properly before plugging in the AC Power Cord. If connecting a Set-top Box through Component Video Input If the TV is connected to a cable / satellite set-top box via Component Video Input, make sure you select the correct Component Video Source by using S SOURCE.
.English Plugging in the AC Power Cord Make sure All the Necessary Connections are made before the AC Power Cord is plugged into an AC outlet. Caution ● Do Not connect the AC Power Cord to an AC Power Supply outside the indicated voltage of this Unit (120V AC). ● Connecting the AC Power Cord to a Power Supply outside of this range may result in Unit failure, degradation or electrical shock.
.English Connecting your Devices Component Analog Video Connection Component Analog Video Connection offers Better Picture quality for Video Devices connected to the Unit. HDMI Digital Connection HDMI Connection offers the Highest Picture quality. HDMI (High-Definition Multimedia Interface) transports high definition Digital Video and multi-channel Digital Audio through a single cable.
.English PC Connection Note(s) HDMI Connection This Unit can be connected to your PC that has an HDMI terminal. Use an HDMI cable for this Digital Connection. ● Please purchase the VGA cable or HDMI-DVI Conversion Cable that has a ferrite core. ● The following operations may reduce noise. ● OUT IN HDMI cable PC HDMI-DVI Connection This Unit can be connected to your PC that has a DVI Terminal. Use an HDMI-DVI Conversion Cable for this Video Digital Connection and it requires Stereo mini 3.
.English These Operations are accessible by Remote Control. Some may also be accessible by the Main Unit's Control Panel. 4 Use H I to select the desired Location setting, then press OK. Initial setup Initial Setup Retail This section will guide you through the Unit’s Initial setting which includes selecting a Language for your On-screen Menu and Autoprogram, which Automatically scans and memorizes viewable channels. Before you begin: Location Home is recommended for normal home use.
.English 7 Press OK to finish Settings assistant. Settings assistant You have set up your viewing preferences. Store ● ● Back Exit When the initial setup is completed, the lowest memorized channel with the confirmation message of the location setting will be displayed on the TV screen. You must set Home in step 4. Otherwise, Picture and Sound settings you adjusted will not be memorized after the unit goes into Standby mode.
4 Use your TV 17 .English Switching Channels Switching on your TV and putting it in Standby mode TV Remote Control TV Remote Control To Turn the TV On from Standby or Off to Standby Press B on the Front panel or the Remote Control. ● Note(s) ● Energy Consumption contributes to air and water pollution. When the AC Power Cord is plugged in, your TV consumes energy with a very low standby Power Consumption.
.English Watching Channels from an External Device Switching Audio Mode Switching Each Input Mode can easily switch with the Remote Control between TV (DTV or Analog TV) and External Devices when they are connected to the Unit. 1 Turn On a Set-top Box or the Connected Device. The picture from the Set-top Box or the Connected Device might appear Automatically on the TV screen.
.English Normal EasyLink options 4:3 If you have our brand products such as Blu-ray Disc player or DVD recorder that are compatible with EasyLink functions, connect them to this Unit via an HDMI cable so you can simply operate various items from this Unit’s Remote Control. Before you begin: Movie expand You must set On in Device control and EasyLink control. L p. 30 Otherwise, LINK does not work even if you connected our brand devices to this unit.
.English TV Screen information You can display the currently selected channel or other information such as the aspect ratio on the TV screen. In the Digital mode, the detailed broadcasting information for the current off the air channel, such as Program title, are displayed. 1 Press T INFO. Digital TV Operation a b A Day of Memories Rating information: US TV : TV-MA US TV : TV-14 US TV : TV-PC US TV : TV-G c KABC US movie : X US movie : NC-17 US movie : R US movie : PG-13 11.
5 Making more use with your TV 21 .English 2 This section describes the overview of the Main Menu displayed when you press Q. The Main Menu consists of the function setting items below. Use H I to select the desired Menu and an item, then press OK or use H I J K to determine the setting. Picture L p. 22 Adjusting the Picture Mode or customize the Picture quality as your preference. Displaying the Main Menu 1 Press Q to display the Main Menu. Sound L p.
.English Picture ● Before you begin: Picture Sound Setup Features Language USB You must set Home in Location. L p. 31 Otherwise, personalized Picture and Sound settings will not be memorized after the Unit goes into Standby Mode. 1 Press Q and use H I to select Picture, then press OK. Picture Sound Setup Features Language USB 2 Settings assistant Auto picture Backlight Contrast Brightness Color Tint Sharpness Advanced settings You can set a Particular Picture Quality using Advanced settings.
.English You can select Audio Output through a Digital Audio Output connector. Sound Digital output format Before you begin: You must set Home in Location. L p. 31 Otherwise, personalized Picture and Sound settings will not be memorized after the Unit goes into Standby Mode. 1 Press Q and use H I to select Sound, then press OK.
.English Setup Autoprogram Before you begin: Please wait while the system is scanning for channels. Auto programming may take more than 20 minutes to complete. 75% Make sure the Unit is connected to Antenna or Cable. 1 Press Q and use H I to select Setup, then press OK.
.English Add channels Features This function lets you add the off the air Analog TV or Analog Cable channels that were not added by the Autoprogram due to reception conditions during the Initial Setting. 1 1 2 Use H I to select Add channels, then press OK. Picture Sound Setup Features Language USB Use the NUMBER keys to enter the number of the channel you want to add, then press OK.
.English Cable / NTSC (Analog) TV Operation Caption service CC-1 and T-1 The primary Closed Captions and Text Services. The Closed Captions or Text is Displayed in the same Language as the Program’s Dialog (up to 4 lines of script on the TV Screen). CC-3 and T-3 Serve as the preferred Data Channels. The Closed Captions or Text is often a Secondary Language.
.English Channel lock Child and Ratings Lock You can prevent your children from watching certain Programs or certain Channels by locking the TV Controls and by using Ratings. 1 Use H I to select Child lock, then press OK. Picture Sound Setup Features Language USB 2 Caption settings Child lock PC settings EasyLink Location E-sticker Software upgrade Home -- Particular Channels or External Input modes can be invisible in this function. 3 4 Use H I to Select Channel lock, then press OK.
.English To set the Sub ratings Setting US Movie and TV Ratings US Movie Ratings Lock is the Rating System created by MPAA. US TV Ratings Lock has Controlled Access to Individual Programs based on their Age and Content rating. 3 Use H I to Select US movie ratings lock or US TV ratings lock, then press OK. 4 Use H I to Select the Desired Rating, then press OK Repeatedly to Switch between View and Block.
.English Canadian English or Canadian French Ratings You can select the Rating for Canadian English or Canadian French broadcasting. 3 Use H I to Select Canadian English rating or Canadian French rating, then press OK. 4 Use H I to Select the Desired Rating, then press OK Repeatedly to Switch between View and Block. ● PC settings This function lets you adjust the PC screen position, clock and phase during PC Input.
.English EasyLink Device list This function allows you to operate the linked functions between our brand Devices with a EasyLink feature and this Unit connecting through an HDMI cable. You must connect this Unit to our brand EasyLink devices and be sure it's EasyLink setting is also set to On. Use H I to select the desired EasyLink devices listed on the TV screen, then press OK. 1 Use H I to select EasyLink, then press OK.
.English Setting your Location to Home Language You can set the Location of your TV to Home or Retail. Choosing Home gives you full flexibility to change predefined settings for Picture and Sound. 1 1 Picture Sound Setup Features Language USB Use H I to Select Location, then press OK. Picture Sound Setup Features Language USB Caption settings Child lock PC settings EasyLink Location E-sticker Software upgrade Press Q and use H I to select Language, then press OK. Select your menu language.
.English USB Picture (JPEG) Your TV is fitted with a USB Connection that enables you to view JPEG photos or watch Motion JPEG files stored on a USB Memory Stick. 1 2 1 Use H I to select the desired file, then press OK. Picture Connect the USB Memory Stick to the USB terminal on the side of your TV. Go to root folder Image1.jpg Image2.jpg Press Q and use H I to select USB, then press OK. ● The Highlighted Text will move to Start now, then press OK again.
6 Upgrade your TV Software 33 .English Downloading the Software Find information and Software related to your TV and Download the Latest Software Upgrade file to your PC. Philips continuously tries to improve its products and we strongly recommend that you Upgrade the TV Software when Upgrades are available. New Software can be Downloaded from our website at www.philips.com/support using the model number of your TV to find information.
.English 7 Useful tips FAQ Question My Remote Control does not work. What should I do? Answer ● Check the Antenna or Cable Connection to the Main Unit. ● Check the Batteries on the Remote Control. ● Re-insert the Batteries with their Polarities (+/–) as indicated. ● Check if there is an obstacle between the infrared sensor window and the Remote Control. ● ● Aim the Remote Control directly at the infrared sensor window on the front of the Unit. ● Reduce the distance to the Unit.
.English Troubleshooting If the Unit does not perform properly when operated as instructed in this User Manual, check the following Troubleshooting Tips and All Connections Once before calling for Service. Power No Power ● Make sure the AC Power Cord is plugged in. ● Make sure that the AC outlet supplies the proper voltage, plug another electrical appliance into the AC outlet to ensure that the AC outlet operates normally.
.English 8 Information Glossary Analog TV (NTSC) Acronym that stands for National Television Systems Committee and the name of Analog broadcasting standards. Off the air Analog TV signals are no longer being sent by major broadcasting stations in the USA. Aspect ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as its height).
.English 9 Specifications Model # 32PFL3509 Picture Type Diagonal Screen Size / Aspect Ratio Viewing Angles Built-in Digital / Analog Tuner Sound WXGA (1366 x 768 pixels 60Hz) 31.
P&F Mexicana, S.A. de C.V. Av. La Palma No. 6, Col. San Fernando La Herradura. Huixquilucan, Edo. de México. C.P. 52787 A4AFHMA ★★★★★ Philips and Philips Shield are used under license of Koninklijke Philips N.V.
