Flat Panel Television User Manual

13
3 Press to enter the [On timer] menu.
4 Press to select [Activate] and set a
day of the week or frequency.
5 Press OK to con rm.
6 Press to select [Time] and set the
starting time.
7 Press [Done] to con rm.
8 Press to select [Program no.] and
set the channel.
9 Press OK to con rm.
10 Press MENU to exit.
Tip
Select [Off] to switch off [On timer] .
When [On timer] is switched off, only
[Activate] option is available.
Set the TV clock before you activate [On
timer] feature (see ‘Set the TV clock’ on page
14 ) .
•
•
•
Use child control
You can prevent your children from watching
certain programs or certain channels by locking
the TV controls.
Set or change your PIN code
1 Press MENU .
2 Press to select [Features] > [Set
code] .
3 Press to enter the code setup.
4 Enter your code with the Numeric
buttons .
5 Re-enter the same code in the new dialog
box for con rmation.
If the code is set successfully, the
dialog box will disappear. However, if
the code cannot be set, you will be
prompted to re-enter the code.
6 If you want to change the code, select
[Features] > [Change code] .
»
5 Press to choose the channel that
you wish to remove from the list.
6 Press OPTIONS .
7 Press to select [Unmark as fav.] .
8 Press OK .
The channel is removed from the
favorite list.
Use timers
You can set timers to switch the TV on or
switch to standby at a speci ed time.
Automatically switch the TV to
standby (sleeptimer)
Sleeptimer switches the TV to standby after a
pre-de ned period of time.
Tip
You can always switch off your TV earlier or
reset the sleeptimer during the countdown.
•
1 Press MENU
2 Select [Features] > [Sleep timer] .
The [Sleep timer] menu appears.
3 Press to set the sleep time.
The sleeptimer can be up to 180
minutes in steps of  ve minutes. If
set to zero minutes, the sleeptimer is
switched off.
4 Press OK to activate the sleeptimer.
The TV switches to standby after the
pre-de ned period of time.
Automatically switch the TV on (on
timer)
You can switch the TV to a speci ed channel
at a speci ed time, from standby.
1 Press MENU .
2 Select [Features] > [On timer] .
»
»
»
»
English
EN