Register your product and get support at www.philips.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
1 Notice 2 2 Important 3 3 Your product Product overview 4 Use your product Switch your TV on/off or to standby Switch channels Watch connected devices Adjust TV volume 5 Use more of your product Access TV menus Change picture and sound settings Create and use lists of favorite channels Use timers Use child control Use the TV clock Update the TV software Change TV preferences Start a TV demo Reset the TV to factory settings 6 Install channels Automatically install channels Manually install channels R
1 Notice 2009 © Koninklijke Philips Electronics N.V.. All rights reserved. Speci cations are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V.. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
• Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety • Risk of electric shock or re! • Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
• • • • • • Risk of injury, re or power cord damage! Never place the TV or any objects on the power cord. To easily disconnect the TV power cord from the power outlet, ensure that you have full access to the power cord at all times. When you disconnect the power cord, always pull the plug, never the cable. Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable.
Remote control Englis h 3 Your product Congratulations on your purchase, and welcome to Philips! To fully bene t from the support that Philips offers, register your product at www.philips.com/welcome. 1 2 22 Side controls and indicators 4 3 4 21 20 19 5 18 6 7 3 17 8 16 9 10 15 11 2 1 a POWER: Switches the TV on or off. The TV is not powered off completely unless it is physically unplugged. b P/CH +/-: Switches to the next or previous channel. c 12 SOURCE: Selects connected devices.
a (Standby-On) • Switches the TV to standby if the TV is on. • Switches the TV on if the TV is in standby. b MENU Toggles the main menu on or off. c d INCR. SURR Enables Incredible Surround for stereo sources. Enables spatial mode for mono sources. SOURCE Selects connected devices. e SAP (Secondary audio program) Selects Secondary Audio Program (SAP)/ Stereo/ Mono when SAP and/or Stereo is broadcast. f OPTIONS Accesses options relating to the current activity or selection.
4 Use your product Englis h Note • If you cannot locate your remote control and want to switch on the TV from standby, press P/CH +/- at the side of the TV. This section helps you perform basic operations. Switch your TV on/off or to standby To switch on • If the standby indicator is off, press POWER at the side of the TV. • If the standby indicator is red, press (Standby-On) on the remote control. To switch to standby • Press (Standby-On) on the remote control. » The standby indicator switches to red.
Watch connected devices Use the source button 1 Press SOURCE . » The source list appears. 2 Press or device. 3 Press OK to watch the connected device. to select the connected Adjust TV volume To increase or decrease volume • Press +/-. • Press VOLUME +/- on the side of the TV. To mute or unmute sound • Press to mute the sound. • Press again to restore the sound.
Access TV menus Menus help you to install channels, change picture and sound settings and access other features. 1 Change picture and sound settings Englis h 5 Use more of your product Change picture and sound settings to suit your preferences. You can apply pre-de ned settings or change settings manually. Use smart picture Use smart picture to apply pre-de ned picture settings. Press MENU. » The menu screen appears. Picture Smart picture Contrast Sound Brightness Color Features Press PICTURE .
• • • • • • • • • • • • • 10 EN [Smart picture] : Accesses prede ned smart picture settings. [Contrast] : Adjusts the intensity of bright areas, keeping dark areas unchanged. [Brightness] : Adjusts the intensity and details of dark areas. [Color] : Adjusts color saturation. [Hue] : Compensates color variations in NTSC encoded transmissions. [Sharpness] : Adjusts the level of sharpness in image details. [Noise reduction] : Filters and reduces noise in an image.
Use smart sound The following picture settings can be con gured. Use smart sound to apply pre-de ned sound settings. Note • Depending on the format of the picture source, some picture settings are not available. [Super zoom](Not for HD and PC mode.) Removes the black bars on the side of 4:3 broadcasts. There is minimal distortion. [4:3]Shows the classic 4:3 format. [Subtitle zoom]Displays 4:3 pictures over the full area of the screen, with sub-titles visible.
[Mono/Stereo]Selects between mono or stereo if stereo is broadcast. [Surround]Enables spatial sound. [Auto volume]Automatically reduces sudden volume changes, for example, when switching channels. When enabled, this produces a more consistent audio volume. [Delta volume]Levels out volume differences between channels or connected devices. Switch to the connected device before you change the delta volume.
6 7 8 Press to choose the channel that you wish to remove from the list. Press Press 3 4 OPTIONS . to select [Unmark as fav.]. Press OK . » The channel is removed from the favorite list. Use timers You can set timers to switch the TV on or switch to standby at a speci ed time. Automatically switch the TV to standby (sleeptimer) Press to enter the [On timer] menu. Press to select [Activate] and set a day of the week or frequency. 5 6 Press OK to con rm. 7 8 Press [Done] to con rm.
7 8 Enter your current code using the Numeric buttons. » If the code is validated, you will be prompted to enter your new code. Enter the new code using the Numeric buttons. » You will be prompted to re-enter the new code for con rmation. Tip • If you forget your code, enter ‘0711’ to override any existing codes. Use the TV clock You can display a clock on the TV screen. The clock displays the current time using time data received from your TV service operator.
• 1 2 • Press MENU. Select [Software update] > [Current software]. • Download the software 1 On your PC, open a web browser and go to www.philips.com/support. 2 Find information and software related to your TV and download the latest software upgrade le to your PC. 3 4 Decompress the ZIP- le. Copy the autorun.upg le to the root directory of the USB device. Update software (analog broadcasts) Before performing this procedure be sure to: • Set aside some time to complete the entire update.
6 Install channels 6 7 The rst time you setup your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). This chapter provides instructions on how to reinstall and ne tune channels. Step 2 Search and store new TV channels Automatically install channels 3 4 This section describes how to search and store channels automatically. 1 2 Press MENU. 3 4 Press OK . Select [Installation] > [Channel install.] > [Channel assistant].
Englis h Rearrange channels After you install channels, you can rearrange the order in which they appear. 1 When watching TV, press OK to display the channel grid . 2 Press OPTIONS . » The channel options menu appears. 3 4 Press to select and enter [Reorder]. Select the channel you want to reorder and press OK . 5 Press to select the new position for the channel. 6 7 Press OK to con rm the new position. 8 Press OPTIONS . » [Done reordering] appears. Press OK to nish reordering.
Audio and video output to analog devices such as another TV or a recording device. 7 Connect devices This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start. Note • Different types of connectors may be used to f AV IN ( VIDEO and AUDIO L/R) Analog audio and video input from analog or digital devices such as DVD players, satellite receivers and VCRs.
Before you connect a computer to the TV • Set the monitor refresh rate on your computer to 60Hz. • Press FORMAT and change the TV picture format to [Unscaled]. HDMI cable and HDMI-DVI adaptor Englis h • Connect a computer PC AUDIO IN/ PC IN(AUDIO) Connect a computer with one of the following connectors: DVI Note • Connections via DVI or VGA require an additional audio cable.
Use Philips EasyLink Your TV supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control. Note • Philips does not guarantee 100% interoperability with all HDMI CEC devices. Note • The EasyLink-compliant device must be switched on and selected as the source.
Product information is subject to change without notice. For detailed product information, go to www.philips.com/support.
Supported TV mounts To mount the TV, purchase a Philips TV mount or a VESA-compatible TV mount. To prevent damage to cables and connectors, be sure to leave a clearance of at least 5.5 cm from the back of the TV. Warning • Follow all instructions provided with the TV mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper TV mounting that results in accident, injury or damage.
This section describes commonly encountered issues and accompanying solutions. General TV issues The TV does not switch on: • Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. • Check that the power cable is securely connected. The remote control is not working properly: • Check that the remote control batteries are correctly inserted according to the +/- orientation. • Replace the remote control batteries if they are at or weak.
The picture does not t the screen; it is too big or too small: • Try using a different picture format. The picture position is incorrect: • Picture signals from some devices may not t the screen correctly. Check the signal output of the device. Sound issues audio cable is connected to AUDIO L/R or AUDIO IN (mini-jack only). Computer connection issues The computer display on the TV is not stable: Check that a supported resolution and • refresh rate is selected on the computer.
H B Batteries Bracket 4, 24 22 C Channel list favorite troubleshooting update Channels favorite list install automatic manual rearrange rename Clock Computer format technical speci cations Connections HDMI troubleshooting mains cord technical speci cations troubleshooting 12 23 12 12 16 16 17 16 14 21 24 18 21 24 15 21 E EasyLink disable enable Environmental care HDMI cable troubleshooting Home mode 24 15 I D Demo Display resolution 12 12 20 20 4 Installation automatic manual 16 16 L Languag
Software update analog version Sound settings Standby troubleshooting 15 15 11 23 T Technical specifcations Timer on timer sleeptimer standby Transmission troubleshooting Troubleshooting TV adjust volume menu software standby switch channels switch off switch on troubleshooting tuner technical speci cations wall mount TV lock lock channels lock connected devices PIN code 21 13 13 13 23 23 8 9 14 7 7 7 7 23 21 22 14 14 23 V Video format video format technical speci cations Volume adjust 26 EN 21 8
© 2009 Koninklijke Philips Electronics N.V. All rights reserved.
