Register your product and get support at www.philips.
Model Serial www.philips.
7 Connect devices 1 Notice 2 2 Important 4 3 Your TV 7 7 7 Side controls and indicators Remote control 4 Use your TV Switch your TV on / off or to standby Switch channels Watch connected devices Adjust TV volume Use teletext 5 Use more of your TV Access TV menus Rename devices from the home menu Remove devices from the home menu Change picture and sound settings Use advanced teletext features Create and use list of favourite channels Use the TV clock Use timers Use TV locks View photos and play mus
1 Notice 2010 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
E n g l i sh Copyright ® Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. All other registered and unregistered trademarks are the property of their respective owners.
2 Important Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
Disposal of your old product and batteries E n g l i sh Risk of injury, fire or power cord damage! • Never place the TV or any objects on the power cord. • To disconnect the TV power cord easily from the power outlet, ensure that you have full access to the power cord at all times. • When you disconnect the power cord, always pull the plug, never the cable. • Disconnect the TV from the power outlet and antenna before lightning storms.
Energy efficiency features • Ambient light sensor (Available in selected models only) To save energy, the built-in Ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens. • Energy saving The energy saving setting of the TV combines several TV settings that result in saving energy. See the smart settings in the setup menu.
3 Your TV Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your TV at www.philips.com/welcome. 1 2 22 21 20 This section gives you an overview of commonly used TV controls and functions. E n g l i sh Remote control 19 3 4 5 6 7 8 Side controls and indicators 18 9 17 10 11 16 12 1 2 3 13 4 5 a +/-: Increases or decreases volume. b (Home): Toggles the home menu on or off.
a • • b (Standby-On) Switches the TV to standby if it is on. Switches on the TV if it is in standby. MENU Toggles the main menu on or off. c MHEG/TELETEXT Toggles teletext on or off. d SOURCE Selects connected devices. o SOUND (Smart Sound) Launches the sound menu. p +/- (Volume +/-) Increases or decreases volume. q • • r e Colour buttons Selects tasks or options. f AD (Audio Descriptor) (For RF Digital TV only) UK only: Enables audio commentary for the visually handicapped.
Switch channels • This section helps you perform basic TV operations. Switch your TV on / off or to standby • • • Press P +/- on the remote control or P/CH +/- on the side of the TV. Enter a channel number using the Numeric buttons. Press OK to use the channel grid. Press BACK P/P on the remote control to return to the previous channel. Note • When you use a favourite list, you can only select those channels in the list (see ‘Select a favourite list’ on page 15).
Watch connected devices Use teletext Note • Switch on the device before selecting it as a source on the TV. Use the source button 1 Press SOURCE. » The source list appears. 2 3 Press To increase or decrease volume • Press +/-. To mute or unmute sound • Press to mute the sound. • Press again to restore the sound. EN Press MHEG/TELETEXT. » The main index page appears.
Rename devices from the home menu After adding a new device to the home menu, you can rename it to your preference. Access TV menus Menus help you to install channels, change picture and sound settings and access other features. 1 Press MENU. » The menu screen appears. Watch TV Add new device Setup 1 2 3 Press Press MENU. to select a device to rename. Press OPTIONS. » The options menu appears. 4 Press to select [Rename device], then press OK. » A text input box appears.
Change picture and sound settings Change picture and sound settings to suit your preferences. You can apply pre-defined settings or change settings manually. Note •• When watching TV or using external devices, press OPTIONS then select [Picture and sound] for quick access to picture and sound settings. Use smart picture Use smart picture to apply pre-defined picture settings. 1 2 3 Press PICTURE. »» The [Smart picture] menu appears. Press to select one of the following settings.
• • [Picture size]: Adjusts the viewing area. (when set to maximum, you might see noise or a rough edge of an image.) [Horizontal shift]: Adjusts the picture horizontally for PC-VGA input. [Vertical shift]: Adjusts the picture vertically for PC-VGA input. Change picture format 1 Press FORMAT. » A picture format bar appears. 2 Press to select a picture format. » The selected picture format is activated. 3 Press OK to confirm your choice.
Use smart sound • Use smart sound to apply pre-defined sound settings. 1 Press SOUND. » The [Smart sound] menu appears. • 2 3 Press to select the following settings. • [Standard]: Adjusts sound settings to suit most environments and types of audio. • [News]: Applies settings for spoken audio, such as news. • [Movie]: Applies settings for movies. • [Custom]: Applies the settings that were customised in the sound menu. Press OK to confirm your choice. » The selected smart sound setting is applied.
A teletext page can hold several subpages. Subpages are displayed on a bar next to the main page number. 1 Press MHEG/TELETEXT. » The teletext screen appears. 2 3 Press P +/- to select a teletext page. Press to enter a subpage. Select T.O.P. teletext broadcasts Table Of Pages (T.O.P.) teletext broadcasts allow you to jump from one subject to another without using page numbers. T.O.P. teletext is not broadcast on all TV channels. 1 Press MHEG/TELETEXT. » The teletext screen appears. 2 Press INFO.
Add a channel to a favourite list Display the TV clock 1 When watching TV, press OK. » The channel grid appears. 1 When watching TV, press OPTIONS. » The TV option menu appears. 2 Press to select a channel to add to a favourite list. Select [Clock]. 3 2 3 Press OPTIONS. » The channel options menu appears. 4 Select [Mark as favourite], then press OK. » The channel is added to the favourite list. Press OK. Use timers You can set timers to switch the TV to standby at a specified time.
You can switch on the TV from standby to a specific channel at a specified time. 1 2 3 4 Press MENU. Press to select [Setup] > [Features] > [On timer]. Press to enter the [On timer] menu. • [Activate]: Selects how often the TV is switched on. • [Time]: Sets the time to switch on the TV. • [Programme no.]: Selects the channel or the connected device. Press MENU to exit. Lock or unlock the TV Lock the TV to prevent access to all channels and connected devices. 1 Press MENU.
7 Repeat the process to lock or unlock more channels. Note • Switch the TV off and on again for the change to take effect. • If you access the locked channels by pressing P +/- on the remote control or from the channel grid, you are prompted to enter your PIN code. View photos 1 In the USB browser, press [Picture] folder. 2 Press album. 3 Press OK to view a full screen image of the photo. to enter the to select a photo or a photo Tip • When in full screen mode, press to move between photos.
Music settings 1 When viewing a slide show, press OPTIONS. » The slide show options menu appears. 2 Press to select one of the following. • [Start Slideshow] / [Stop Slideshow]: Starts or stops a slide show. • [Slideshow transitions]: Sets the transition from one picture to the next. • [Slideshow frequency]: Sets the amount of time that a picture is shown. • [Rotate image]: Rotates a picture. • [Show info]: Displays the picture name, date, size and next picture in the slide show.
Update the TV software Change TV preferences Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available. Check www.philips.com/support for availability. Use the preferences menu to customise your TV settings. 1 2 Press 3 4 5 Press Check the current software version 1 2 Press MENU. Press to select [Setup] > [Software update] > [Current software]. » The TV displays the current software information.
Start a TV demo You can map channels provided through a decoder or descrambler to your TV channel selection. In this way, you can select these channels by using the RC of your TV. The decoder or a descrambler must be connected to EXT1 (SCART). You can use demonstrations to better understand the features of your TV. Some demos are not available on certain models. Available demos are displayed in the menu list. Set decoder channel 3 1 2 Press DEMO on the remote control.
6 Install channels The first time you set up your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). This chapter provides instructions on how to re-install and fine tune channels. Automatically install channels This section describes how to search and store channels automatically. 5 Select [Start], then press OK to re-install channels. • To stop searching, select [Stop] and press OK. 6 Press MENU to exit.
Press OK to begin search. » If a channel is unavailable at the selected frequency, the system searches for the next available channel. 6 Press found. 7 Press to select [Store as new channel] to store the new channel under a new channel number. 8 9 Press BACK when the new channel is Skip channels 1 When watching TV, switch to the channel you want to skip. 2 3 Press to enter [Store as new channel]. 4 Select [OK], then press OK to store the new channel.
Rename channels Rearrange channels You can rename channels. The name appears when you select the channel. After you install channels, you can rearrange the order in which they appear. 1 When watching TV, press OK to display the channel grid. 1 When watching TV, press OK to display the channel grid. 2 3 Select the channel to rename. 2 Press OPTIONS. » The channel options menu appears. Press OPTIONS. » The channel options menu appears. 3 Press OK.
This section describes how to connect devices with different connectors. Examples are provided in the Quick Start. a TV ANTENNA Signal input from an antenna, cable or satellite. E n g l i sh 7 Connect devices TV ANTENNA Note • You can use different types of connectors to connect a device to your TV. Back connector b EXT 1 and EXT 2 (CVBS and RGB) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles.
c EXT 3 (Y Pb Pr and AUDIO L/R) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. f HDMI 1 Digital audio and video input from highdefinition digital devices such as Blu-ray players. Connections via DVI or VGA require an additional audio cable (see ‘Connect a computer’ on page 28). d PC IN (VGA and AUDIO IN) Audio and video input from a computer. AUDIO IN LEFT/RIGHT VGA/DVI VGA VGA e SERV. U For use by service personnel only.
b VIDEO Composite video input from analogue devices such as VCRs. E n g l i sh Side connector c HDMI Digital audio and video input from highdefinition digital devices such as Blu-ray players. a AUDIO L/R Audio input from analogue devices connected to VIDEO. d USB Data input from USB storage devices.
• Connect a computer HDMI cable and HDMI-DVI adaptor AUDIO IN LEFT/RIGHT VGA/DVI Before you connect a computer to the TV • Set the screen refresh rate on your computer to 60Hz. • Select a supported screen resolution on your computer. Connect a computer with one of the following connectors: DVI Note • Connections via DVI or VGA require an additional audio cable.
Your TV supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control. Use one-touch play 1 E n g l i sh Use Philips EasyLink After enabling EasyLink, press play on your device. » The TV automatically switches to the correct source. Use one-touch standby Note • The EasyLink-compliant device must be 1 switched on and selected as the source.
Use a Kensington lock There is a Kensington security slot at the back of the TV. Prevent theft by looping a Kensington lock between the slot and a permanent object, such as a heavy table.
Product information is subject to change without notice. For detailed product information, go to www.philips.com/support.
Product specification Design and specifications are subject to change without notice. 32PFL3605/32PFL3205 • Without TV stand • Dimension (WxHxD): 795.6 x 508.3 x 93 (mm) • Weight: 8.3 kg • With TV stand • Dimension (WxHxD): 795.6 x 556.6 x 220.8 (mm) • Weight: 9.4 kg 42PFL3605 • Without TV stand • Dimension (WxHxD): 1018.5 x 635.7 x 83 (mm) • Weight: 11.5 kg • With TV stand • Dimension (WxHxD): 1018.5 x 683 x 235.8 (mm) • Weight: 12.
This section describes commonly encountered issues and accompanying solutions. General TV issues The TV does not switch on: • Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. • Check that the power cable is securely connected. The remote control is not working properly: • Check that the remote control batteries are correctly inserted according to the +/- orientation. • Replace the remote control batteries if they are flat or weak.
Picture issues Sound issues The TV is on, but there is no picture: • Check that the antenna is properly connected to the TV. • Check that the correct device is selected as the TV source. There is sound but no picture: • Check that the picture settings are correctly set. There is poor TV reception from an antenna connection: • Check that the antenna is properly connected to the TV. • Loudspeakers, unearthed audio devices, neon lights, high buildings and other large objects can influence reception quality.
E n g l i sh Computer connection issues The computer display on the TV is not stable: • Check that your PC uses the supported resolution and refresh rate. • Set the TV picture format to unscaled. Contact us If you cannot resolve your problem, refer to the FAQs for this TV at www.philips.com/support. If the problem remains unresolved, contact Philips Consumer Care in your country as listed in this user manual. Warning • Do not attempt to repair the TV yourself.
10 Index A analogue fine-tune antenna 23 25 connectors back connectors HDMI overview side connectors USB country 25 34, 25 25 27 18 22 D B back connectors batteries bracket for wall mount 25 31, 5 31 C care channel decoder channel grid channels favourites list fine-tune grid install automatic manual list lock rename reorder / rearrange skip channels switch troubleshooting tune child lock lock channels lock connected devices PIN code clock set computer connect display resolution connect antenna PC 36 E
HDMI home mode O 34, 25, 27 20 I install channels automatic manual 30 L language menu troubleshoot list favourites list location country home or shop lock Kensington lock lock channels lock connected devices PIN code 22 33 15 22 20 30 18 17 17 M menu language main menu teletext MHEG teletext MPEG artifact reduction multimedia music USB with slideshow mute TV speakers 16 29 29 P 22 22 K Kensington lock on timer one-touch play one-touch standby 22 11 14 10 12 31 PC connect resolution picture forma
S U safety screen care settings picture sound shop mode side connectors skip channels slideshow view with music smart picture smart settings smart sound software version sound settings specifications standby subpages in teletext switch channels on and off source 4 5 12 14 20 27 23 19 19 12 12, 14 14 20 14 31 9 15 9 9 10 T Table of Pages technical specifications teletext features menu subpages Table of Pages use timer on timer sleep timer standby transmission transporting troubleshooting TV lock lock chann
EN 39
To find out on how to re-tune your TV,check the user manual online for details 40 EN
© 2010 Koninklijke Philips Electronics N.V. All rights reserved.
