Quick Start Setup Guide 32HFL4663D 32HFL4663D
Know these safety symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the apparatus’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Read these instructions.
1 Notice Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. P&F USA reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system. If the product or its individual modules or procedures are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained.
2 Important Environmental care Positioning the TV • • • • • • • • • • • • Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV. Make sure to hold the upper and bottom frames of the unit firmly as illustrated. Install the unit in a horizontal and stable position. Do not install the unit in direct sunlight or in a place subject to dust or strong vibration. Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
How to use this guide TV Setup The Quick Start Setup Guide helps you install the Philips commercial television, as quickly as possible. It contains the necessary information to install the TV and configure the settings. Read and understand the instructions in the Quick Start Setup Guide before you use your TV. For detailed information on additional features, download the user manual by selecting your TV model at www.philips.com/hospitality.
Channel installation This section describes how to install the TV channels automatically. 1 2 Connect the RF signal to the TV. Plug the power cord into the power outlet. Cable 3 Turn the TV on. • Press . (POWER) at the front of the TV or use the . (POWER) on the remote control. 4 Press RC5 SETUP to put the remote control into setup mode, then press the HOME/MENU button to display the setup menu.
e f g h a i b c d a DATA (RJ-12 SPI port) b Digital audio output jack c IP Control port d Antenna Input jack e PC Input jack f USB terminal g HDMI Input jack(s) h Audio input jack for PC connection i Audio Video Input jack 8 32HFL4663D
Installation Install TV Channels (Skip if the TV is in PPV mode) Note • As part of the initial TV setup, there is PC application to support the installation. The application that can be downloaded at www.philips.com/hospitality or contact Philips agent representative, this tool is subject to availability. In the 1st time (Virgin) installation, the following steps should be followed: 2 3 Select Settings. If TV is part of a PPV (Pay Per View) system 2 3 4 Select System.
Configure standard TV settings Installation of pay-per-view box This menu will allow the configuration of the standard TV parameters. Options: Language, Picture, Sound, Caption settings, Child Lock, EasyLink This section describes how to install a external pay-perview box. Step 1 : Set the communication mode You must setup the correct communication protocol before you connect the Pay-per-View box to the TV. This section describes how to select the communication mode.
Multi RC Multi RC enables control of multiple TVs in a room without any interference from each other’s remote control. To enable Multi RC, each remote control is set to one of the four colors - Blue, Green, Yellow or Red. Each TV in the room is separately programmed to a remote control of one of those colors. In this way, each TV responds to only one RC that is set to the same color as the TV itself. This prevents interference from each other’s remote control when you watch multiple TVs in a room.
P&F USA, Inc. PO Box 430 Daleville, IN 47334-0430 P&F Mexicana, S.A. de C.V. Av. La Palma No. 6, Col. San Fernando La Herradura. Huixquilucan, Edo. de México. C.P. 52787 Philips and Philips Shield are used under license of Koninklijke Philips Electronics N.V.
