Register your product and get support at www.philips.
Eng lis h 1 How to use this guide The Quick Start Guide helps you install the Philips commercial television, as quickly as possible. It contains the necessary information to install the TV and configure the settings. Read and understand the instructions in the Quick Start Guide before you use your TV. For detailed information on additional features, download the user manual by selecting your TV model at www.philips.com/hospitality.
2 The contents of the box The box contains the following items: • which secure the TV stand to the furniture of the hotel room to prevent unauthorized removal or theft • desk-to-stand screws (2)* • desk-to-stand washers (2)* • desk-to-stand secure groove nuts (2)* • which secure the TV stand to the TV to prevent unauthorized removal or theft • stand-to-TV secure screws (4)* • stand-to-TV cross-head screws (4)* • the TV • the TV stand • Quick Start Guide • 2-pin power cord • Guest remote control* Note •• * T
4 This section describes how to install the TV channels automatically. 1 2 Eng lis h 3 Standalone installation Connect the RF signal from the wall socket to the TV. Plug the 2-pin power cord into the power outlet. 3 MENU 2 1 • Press Power on the setup remote control. TV ANTENNA POWER RECALL TEXT SMART SLEEP CC GUEST DCM SETUP Cable 3 5 6 2 3 4 5 6 7 8 9 Press M on the setup remote control to display the setup menu. Press to select AUTO INSTALL TV.
4 Change the channel settings 4 5 6 This section describes how to change the channel settings. digital channel numbers. Press to select CHANNEL INSTALL > CHANNEL. TV 2 TUNER > NO 2 8 RINGS Select a ring 1 2 3 ( MUTE ) > Press 0-9 (Numeric buttons) to select a channel. • For cable mode, select a number between 01 - 250. • For antenna mode, select a number between 02 - 250. to select the source Manual installation of digital channels 4 Press to select CHANNEL INSTALL > RINGS.
SWITCH ON / OSD WELCOME MESSAGE SWITCH ON CHANNEL SWITCH ON SMARTGUIDE SWITCH ON VOLUME SWITCH ON PIC FMT POWER ON VOLUME INDICATOR CHANNEL DISPLAY This section describes how to configure the advanced settings for the TV such as volume, channel, picture format, power mode, picture, sound, security, control, ratings, and hotel information. Access the configuration menu 1 2 Press to select CONFIGURATION.
Configure the control settings 1 2 Press M on the setup remote control to display the setup menu. Press to select CONFIGURATION > CONTROL > MAX VOLUME. CONTROL ESP DIGIT TIMEOUT 3 DIGIT ENTRY SOURCE MENU ITEM PIC FMT MENU ITEM SMART GUIDE MIN VOLUME MAX VOLUME 3 4 6 Press Press EN OFF 3.0 NO NO NO NO 0 12 to adjust the maximum volume for the TV. to adjust other control settings from this menu.
Configure SmartPower settings Philips continuously focuses on lowering the environmental impact of its consumer products by adopting energy efficient ways of power management. This section describes how to select a setting for maximum power savings. 1 2 Configure SmartGuide Categories This section provides information to configure SmartGuide Categories icons. Guests can access these icons by pressing the CHANNEL GUIDE button on the guest remote control to display the SmartGuide Categories screen.
SECURITY SECURITY KEYBOARD LOCK REMOTE CONTROL LOCK DECRYPTION CONTROL SMARTSECURE 3 4 Press STANDARD NO NO > > to enable or disable SmartSecure. Press to select the SmartSecure channel. »» The TV checks for the SmartSecure ID when turned on. 5 Press to adjust other security settings on this menu. Note •• SMARTSECURE must be used with a Philips Smart Gateway (PSG) device. Do not enable SMARTSECURE unless the PSG has been configured at your location.
You can copy the configuration data from a TV to a USB storage device or vice versa. This enables you to bypass the setup menu and configure multiple TVs by simply using the USB storage device. This section describes how to clone the configuration data from a TV to a USB storage device or from a USB storage device to a TV.
8 Troubleshoot basic problems This section describes commonly encountered issues and accompanying solutions. The letter ‘F’ appears on the screen: •• If the letter ‘F’ appears on the screen, it indicates that the TV is in factory mode. To restore the TV to normal settings, press VOLUME (-) and P/CH (-) buttons on the side of the TV, simultaneously for a few seconds.
Eng lis h Appendix A IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8.
12
© 2010 Koninklijke Philips Electronics N.V. All rights reserved.
