Register your product and get support at www.philips.
Österreich België/Belgique България Hrvatska Česká republika Danmark Estonia Suomi France Deutschland Ελλάδα0 Magyarország Ireland Italia Қазақстан Latvia Lithuania Luxemburg/Luxembourg Nederland Norge Polska Portugal România Moscow Србија Slovensko Slovenija España Sverige Suisse/Schweiz/Svizzera Türkiye United Kingdom Україна 0810 000205 078250145 +3592 489 99 96 01 6403 776 800142840 3525 8759 6008600 09 2311 3415 0821 611655 01803 386 852 0800 3122 1280 0680018189 North 0800 055 6882 South 1800-PHILIP
Contents 1 Notice 2 2 Important 4 3 TV overview 6 Side controls and indicators 6 Guest remote control 7 Basic TV menus 8 Watch TV 10 Watch a connected device 12 4 Use more of your product 13 Use Teletext 13 Favourite channels 14 Use EPG 14 Use timers 15 Use locks 15 Use the TV clock 16 Use subtitles 16 Access multimedia 17 Use Scenea 18 Universal access 18 5 Set up the TV 20 Change picture and sound settings 20 Change channel settings 22 Install channels 23 Change language settings 25 Change other settings
1. Notice 2010 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
standardisation for early integration in its products. Mains fuse (UK only) This TV is fitted with an approved molded plug. Should it become necessary to replace the mains fuse, this must be replaced with a fuse of the same value as indicated on the plug (example 10A). 1 Remove fuse cover and fuse. 2. The replacement fuse must comply with BS 1362 and have the ASTA approval mark. If the fuse is lost, contact your dealer in order to verify the correct type. 3. Refit the fuse cover.
2. Important Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety • Risk of electric shock or fire! • Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
• Risk of hearing damage! Avoid using earphones or headphones at high volumes or for prolonged periods of time. • If the TV is transported in temperatures below 5°C, unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet. Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Screen care • Avoid stationary images as much as possible.
3. TV overview Side controls and indicators This section gives you an overview of commonly used TV controls and functions. Please read section 3 to 6 to set the basic consumer menu first, and then follow the instructions in section 7 to set the Professional mode menu. : Increases or decreases volume.In the home menu, press these buttons to move horizontally. Home : Accesses the home menu.Press again to launch an activity in the home menu. P/CH +/- : Switches to the next or previous channel.
Guest remote control 1 (Standby-On) • Switches the TV to standby if it is on. • Switches on the TV if it is in standby. 2 EPG/TELETEXT Accesses the browse menu to select TV channel list, the Electronic Programme Guide and teletext. 3 ALARM Lauches [Alarm time] menu. (Only applicable in [Hospitality] mode and in some models.) 4 AV Selects connected devices. 5 EXIT/MENU Accesses the home menu. 6 OPTION Options menus offer convenient settings related to what is on screen. 7 OK Confirms an entry or selection.
15 (Volume +/-) Increases or decreases volume. 16 BACK • Returns to a previous screen. • Returns to the previously viewed channel. Remote control usage When using the remote control, hold it close to the TV and point it at the remote control sensor. Make sure that the line-of-sight between the remote control and TV is not blocked by furniture, walls or other objects. 17 Colour buttons • Selects tasks or options. • When Professional mode is On, press to operate Multi remote control function.
EPG/Teletext Watch TV The EPG/Teletext menu gives you easy access to: • Electronic program guide • TV channel list • Teletext To access this menu, while watching TV, press a. the EPG/Teletext button on the remote control. Switch on/off or to standby 1. Press the Navigation buttons to select an item: • [Program guide] : Accesses the Electronic Program Guide. • [Channel list] : Accesses the TV channel list. • [Text] : Accesses Teletext. 2. Press OK to confirm your choice.
Switch Channels Press P +/- on the remote control or P /CH +/on the side of the TV. Adjust TV volume To increase or decrease volume • Press on the remote control. • Press on the side of the TV. To mute or unmute sound • • • Press , then select [Channel list] to use the channel list. Press to return to the previously-viewed channel. Enter a channel number using the Numeric buttons. To view analogue or digital channels only Filter the channel list to access analogue or digital channels only. 1.
• [Energy saving] : The most energyconscious settings. • [Standard] : Adjusts picture settings to suit most environments and types of video. Factory default settings. • [Photo] : Ideal settings for viewing photos. • [Custom] : Allows you to use the customize stored picture settings. • [Movie expand 16:9] : Scales the classic 4:3 format to 16:9. Not recommended for HD or PC. • [Wide screen] : Stretches the classic 4:3 format to 16:9. Watch a connected device 3. Press OK to confirm your choice. 4.
4. Use more of your product Select subpages Use Teletext A teletext page number can hold several subpages. These subpages are shown on a bar next to the main page number. When available on a teletext page, press ◄ or ► to select subpages. Select a page 1. Press . 2. Select [Text], then press OK. 3. Select a page by: • Entering the page number with the Numeric buttons. • Pressing ▲ or ▼ to view the next or previous page. • Pressing the Colour buttons to select a colour coded item. 4.
Use EPG Alarm Clock Overview You can set an Alarm on a selected clock time (related to the displayed clock time) The Electronic Programme Guide (EPG) is an on-screen guide available for digital channels. EPG allows you to: • View a list of digital programmes being broadcast • View upcoming programmes • Group programmes by genre • Set reminders when programmes start • Set up preferred EPG channels * EPG is not available in all countries. 1.
Subtitle language This feature is only supported on selected digital channels. 1. While watching TV, press . 2. Select [Subtitles]. 3. Select a subtitle language from the list, then press OK. Listen to music Press the Navigation buttons to select a music track, then press OK. • Press ◄ / ► to fast rewind or fast forward a track. • Press Press settings : Access multimedia Browse USB You can view photos or play music and videos on TV from a USB storage device.
4. Select [TV/Radio] > [Radio], then press OK. Adjust volume for the visually impaired 1. In the [Universal access] menu, press the yellow button to select [Mixed volume]. 2. Press the Navigation buttons to move the slider up or down, then press OK. Use Hotel Information 3. Press to exit. Activate Hotel Information You can use Hotel Information to display a picture as Information sheet on your TV. Make sure that the location of your TV is set to [Home] mode. 1. Press . 2.
5. Set up the TV Professional Setup Remote control (22AV8573 optional) Introduction This TV is a special TV, that allows the TV to be configured for a hotel application This section describes how to install and operate this TV. Before reading this section, please also read section 4 to understand the basic functionality of this TV. Benefits of specific Hotel TVs This TV is specially designed to operate in Professional Mode.
Professional mode options This paragraph describes the functionality of each item in the Professional mode setup menu. Enter the next layer by pressing [OK], or [>]. Return to a previous level by pressing [<]. Navigate in the current layer by pressing [^], or [v].
Erase key option Erase key Speaker settings TV Speaker Enable Factory default Independent Main Speaker Mute Default Main Speaker Volume TV setup Enter Consumer Mode Channel setup Enter TV Channel Setup Store Settings Save all made changes Smart Clone USB to TV TV to USB SW types RF Download Program Info Start Download Express Box Software Upgrade Clone Channels To Special Map SP Communication PrimeSuite xxHFL4373D/10 Shared key, Odd
Setup settings PBS Setup [PBS Setup menu language] Select Setup menu language to be English, French, German or Italian. [PBS Mode] Enables / disables the Professional Hotel mode. [On]: All settings in the Professional mode Setup menu are in effect. [Off]: The TV operates as a normal (consumer) TV. [Room ID] Entry field to store 4 digits to identify Room Identifier. [Switch on settings] [Switch on volume] When the guest switches the TV on, it will play at the specified volume level.
[Off]: When set to Off, the TV will hide the Welcome Logo at start-up. [On]: When USB device is plugged in, the [Multimedia] menu appears automatically. [Browse USB] Enables / disables the USB Browse icon to be presented in the Guest Menu. [On]: When set to On, the TV will show the USB icon in the Home menu. [Off]: When set to Off, the TV will hide the USB icon in the Home menu. [SXP Baudrate] Sets the Baudrate for the SerialExpress communication channel to be 38200 or 19200 Baud (bits per second).
[Enable Subtitles] Enables or disables the use of subtitles in a DVB broadcast channel: [Off]: No subtitles services available (Prison Mode) [On]: Subtitles services available [Enable Channel Map] Select Channel Map to be viewed: [Native]: Show standard default channel map [BDS]: To be used only if a STB is connected [Power settings] [Power on] The power on function allows the TV to enter a specific mode ([On], [Standby], or [Last status]) of operation when the mains power is activated (cold start): [On]:
[Download Program] Set selected Download Program as source for clock time. Time Offset] Offset time added to the downloaded clock time: [Slider]: -12 to 12 hr [Buzzer Volume] Audio Clock Time Alarm (buzzer): [Set]: Off, On [Daylight saving] Set the Daylight saving options: [Set]: Off, On [Feature settings] [Multi RC] This function allows that up to four televisions can be installed in a room whereas every TV will listen to its own RC.
[Vsecure self test] [Action] Internal self test to validate VSecure. After this load proper hotel specific keys. [Program Info] This function is to set the necessary DVB parameters to locate the proper VSecure RF channel to load the VSecure RF Static or RF Dynamic key(s): [Frequency] Frequency of MUX (0362) [Medium] Cable or Antenna (DVB T) [Service ID] ##### (00001) [ONID] ##### (00000) [NID] ##### (00000) [TSID] ##### (00000) [Symbol Rate] # . # # # (6.
TV Setup With this option, all basic TV functionality can be configured. If any setting is changed within the PBS Menu, they should be stored before pressing [OK], otherwise they will be discarded. • [Contrast]: Adjusts the intensity of bright areas, keeping dark areas unchanged. Press OK to confirm your choice. • [Brightness]: Adjusts the intensity and details of dark areas. Press OK to confirm your choice. • [Colour]: Adjusts colour saturation. Press OK to confirm your choice.
• [Screen edges]: Changes the picture size. Press OK to confirm your choice. • [Headphones volume]: Adjusts headphone volume. Press OK to confirm your choice. • [Picture shift]: Adjusts the position of the picture. Not applicable if selected picture format is [Auto zoom] or [Wide screen]. Press OK to confirm your choice. • [Auto volume leveling]: Automatically reduces sudden volume changes, for example, when switching channels. Press OK to confirm your choice.
Press OK to confirm your choice. 4 Press [Back/PP] to return to TV Setup Menu. 5 Press [Back/PP] to exit. Preferences 1 Press [Home/Menu] ] > [TV Setup>. 2 Select [Setup] > [TV settings] > [Preferences], then press OK. 3. Select a setting to adjust and press : • [Menu language]: Set the required menu language. Press OK to confirm your choice. • [Sleep timer]: Set the required sleep timer time-out [0..180 min]. Press OK to confirm your choice. • [Location]: Set the location where the TV is used.
Reinstall TV Starts a TV initialization to reset all settings to default and replace (reinstall) all channels. 1 Press [Home/Menu] ] > [TV Setup> [OK]. 2 Select [Setup] > [TV settings] > [Reinstall TV], then press OK. 7 Press [Settings] to continue and install channels. Perform the following steps: [Install TV channels] and press [Continue] [Settings] TV will perform a power down cycle going into standby and then starts-up again.
8 Press [Start] to continue. 9 If a preset Network Frequency is not available, or the Network Frequency Mode is set as manual, Enter the Network Frequency and press [Done] to continue. Press [Cancel] if no DVB-C to install (only DVB-T and Analogue). 10 Once the channel list is configured, the TV shows how many digital and analog channels are captured and returns to the TV Setup OSD. 11 Press [Done] > [Skip] > [Finish] > [Close] to return to the TV Setup Menu.
[Symbol rate mode]: Automatic TV will use the preset Symbol rate (6.900/6.875) Manual Option to set Symbol rate 1 and Symbol rate 2 [Symbol rate 1]: 0.000 (to set) [Symbol rate 2]: 0.000 (to set) [Search]: Start the test scan Set the frequency for the selected MUX [000.00] and press [Search]. After finding the channels press [Done].
Change channel settings After installation, you may want to reorder the channel list to suit your preference. 1 Press [Home/Menu] ► [Channel setup] ► 2. Select a channel to adjust and press : Once finished use [Back] button to return. 2. select [PayTV] ► [R1] ►and mark the channels to include in the Free to view list and press . Unmark a channel to remove it from the list. Once finished use [Back] button to return. • [Rename] ►: Press to bring up the virtual keyboard and edit the name.
Smart Clone With Smart Clone it is possible to copy to/from a USB device TV the configuration data and channel list data. Place a USB Memory stick in the USB side I/O connector of the TV. *USB device should be formatted as FAT or FAT32. USB to TV 1. select [Smart Clone] and press OK. 2. select [USB to TV] and press OK. 3. Clone data will be loaded from USB device into TV. To activate the loaded settings, wait until the OSD message is displayed to remove the power cord. 4.
6. Connect devices 2) DIGITAL AUDIO OUT Audio and video output to analogue devices such as another TV or a recording device. This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start. ••Different types of connectors may be used to connect a device to your TV, depending on availability and your needs. Back connector 3) HDMI 1 Digital audio and video input from highdefinition digital devices such as Blu-ray players.
Side connector 3) HDMI Digital audio and video input from highdefinition digital devices such as Blu-ray players. Connect a computer 1) COMMON INTERFACE Slot for a Conditional Access Module (CAM). Before you connect a computer to the TV • Set the screen refresh rate on your computer to 60Hz. • Select a supported screen resolution on your computer. Connect a computer with one of the following connectors: ••Connections via DVI or VGA require an additional audio cable.
• DVI-HDMI cable Use a Conditional Access Module A Conditional Access Module (CAM) is provided by digital TV service operators to decode digital TV channels. ••If required, refer to documentation from your operator on how to insert a smart card into the Conditional Access Module. Proper working can only guaranteed by your operator. Insert and activate a CAM • HDMI cable and HDMI-DVI adaptor ••Be sure to follow the instructions described below.
Use Philips EasyLink Your TV supports Philips EasyLink, which enables one-touch play and one-touch standby between EasyLink-compliant devices. ••Compliant devices must be connected to your TV via HDMI. Use a Kensington lock There is a Kensington security slot at the back of the TV. Prevent theft by looping a Kensington lock between the slot and a permanent object, such as a heavy table. Enable or disable EasyLink ••Do not enable Philips EasyLink if you do not intend to use it. 1. Press 2.
7. Product information Product information is subject to change without notice. For detailed product information, go to www.philips.com/support.
8. Troubleshooting This section describes commonly encountered issues and accompanying solutions. General TV issues The TV does not switch on: ••Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. ••Check that the power cable is securely connected. The remote control is not working properly: ••Check that the remote control are correctly inserted according to the +/orientation. ••Replace the remote control batteries if they are flat or weak.
The picture does not fit the screen; it is too big or too small: ••Try using a different picture format. The picture position is incorrect: ••Picture signals from some devices may not fit the screen correctly. Check the signal output of the device. Sound issues There is a picture but sound quality is poor: ••If no audio signal is detected, the TV automatically mutes the audio output — this does not indicate malfunction •Check that all cables are properly connected. ••Check that the volume is not set to 0.
9. A Attachment 1 0 This section describes commonly encountered issues when installing DVB-T channels. DVB-T installation issues The TV does not switch on: • Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. • Check that the power cable is securely connected.
Index A age rating 15 Alarm 15 ALARM 7 audio language 23 Audio lip sync 26 B Batteries 44 Blue mute 35 C Channel list PayTV channel 37 Troubleshooting 46 clock 16 Computer Connect 41 display resolutions 44 Troubleshooting 47 Consumer setup 33 D Digital channels CAM 42 Display resolutions 44 E EasyLink disable 43 Enable 43 HDMI-CEC in 35 one-touch play 43 one-touch standby 43 H HDMI HDMI-CEC in 35 Troubleshooting 47 Hearing impaired 25 home mode 27 I Installation K Kensington lock 43 L Language Troubleshoo
P picture format 12 picture setting 20 picture settings 20 POWER 10 Technical specifications 44 Professional mode Activate 30 Options 31 PBS mode 33 Store settings 37 R Remote control Multi remote control 36 Professional Setup Remote control 29 RC lock 34 Remote control usage 8 Technical specifications 44 Troubleshooting 46 Rename channel 22 Reorder channels 22 U Universal access 18 Remote control 8 USB Enable USB 35 USB break-in 35 V Video formats 44 Visually impaired 19 Volum 11 W Wall mounts 44 Welcome
© 2011Koninklijke Philips Electronics N.V. All rights reserved.
PrimeSuite xxHFL4373D/10 Page 45
PrimeSuite xxHFL4373D/10 Page 46
PrimeSuite xxHFL4373D/10 Page 47
