User Manual Quick Start Guide Inside ! 用戶手冊 內附快速使用指南! 中文 English 32HF7445 Model No.: Serial No.
How to make the optimal connection? 如何進行最佳連接? Cover & Connection 1 Best HDMI High-Definition Multimedia Interface provides an uncompressed, all-digital audio/video connection. HDMI provides the ultimated connection (Please use a certified HDMI cable.) 最好 HDMI 高清晰多媒体接口提供無壓縮的全數字 音頻/視頻連接。 HDMI 提供的是終极的連接 （請使用通過認證的 HDMI 線纜。） Better Component Video input Provides superior picture quality by separating the green, blue and red luminance signals. Typically used with red/white audio cables.
2HF7445 DATA 1 DATA 2 (RJ12) DATA 1 (RJ45) DATA 2 S-VIDEO D-SUB HDMI 2 Y Pb Pr CVI 1 HDMI 1 L AUDIO L R VIDEO IN AUDIO IN R PC IN AC IN Y CVI 2 AC IN HDMI 1 / HDMI 2 PC IN - Audio input, D-SUB CVI - Component (YPbPr), Audio L/R input CV2 - Component (YPbPr), Audio L/R input AV - Video input, S-video, Audio L/R input SPDIF output 8 Mono Audio out 75 /RF Side AV - S-video, Audio L/R, Video input Earphone DATA 1 / DATA 2 Cover & Connection 2 Pb Pr L AUDIO IN R AUDIO IN 8 S-VIDE
Quick start quide 1 Cable Box With RF In / Outputs Antenna TV 分線盒 (帶有RF輸入/輸出) 天線電視 Outdoor or Indoor Antenna 室內或室外天線 (Combination VHF/UHF) (VHF/UHF組合) or 或者 Antenna with 75� cable 天線(75�電纜) Twin-lead wire to 300-75� adapter 接300-75� 適配器的扁平雙線 TV 電視 or 或者 RF The Cable TV signal 來自有線電視公司 from Cable Company 的有線電視信號 A 75 coaxial cable 75 同軸線 OUTPUT CH 3 CABLE IN 4 TO TV *After setting up, please run the Auto store function to set up the TV for the broadcast or cable channels available in your area.
3 VCR, DVD Player, Or Other Devices With RCA Connectors L VIDEO IN VCR, DVD播放機或帶有 RCA 連接器的其它設備 R AUDIO IN 8 S-VIDEO SPDIF OUT AV TV 電視 A B S-Video Composite Audio/Video Input AV Player with A/V connectors 帶有A/V接口的AV播放機 C *Use AV button on the remote control to select AV or Side AV if you use the different jacks for the hookup to watch VCR.
5 PC (Monitor) Connections PC (顯示器)連接 D-SUB Y Pb L Pr CVI 1 PC IN Y Pb L Pr CVI 2 R AUDIO IN TV 電視 B A C R AUDIO IN AUDIO Computer 計算機 *Use AV button on the remote control to select PC to use your LCD TV as a PC monitor.
Welcome Know these safety symbols Congratulations on your purchase, and welcome to the “family!” Dear PHILIPS product owner: Thank you for your confidence in PHILIPS. You’ve selected one of the best-built, best-backed products available today. We’ll do everything in our power to keep you happy with your purchase for many years to come. This “bolt of lightning” indicates uninsulated material within your unit may cause an electrical shock.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12 13. 14. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.
Precaution ADDITIONAL SAFETY PRECAUTIONS • ENSURE that LCD TV stand is tightened properly to the set on the right way of tightening of the screw of the stand to the set. Improper tightening of screw may render the set unsafe. • If LCD TV is installed on the wall, installation should be carried out by qualified servicemen. Improper or incorrect installation may render the set unsafe. • Disconnect main plug when : — cleaning the TV screen, never use abrasive cleaning agents. — there is a lightning storm.
Contents Care of the screen See Tips, p. 20 End of life directives - Recycling Philips has paid a lot of attention to producing an environmentally friendly product. Your new TV contains several materials that can be recycled for new uses. At the end of its life, specialized companies can dismantle and recycle this set. This will minimize the amount of materials being disposed of. Please be sure to dispose of this set in accordance with all state and local regulations. Welcome . . . . . . . . . . . . . . .
Preparation 1 Do not insert the power plug in a wall socket before all connections are made. Place the TV on a solid surface. For ventilation, leave at least 4” to 6” free all around the TV. Do not place the TV on a carpet. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed in the vicinity. Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing.
Buttons on the TV Should your remote be lost or broken you can still change some of the basic settings with the control buttons on your TV. Press: •the button to switch the TV on or off. •the + VOLUME -button to adjust volume; •the + PROGRAM -buttons to select the TV channels or sources. The MENU button can be used to display the Settings menu without the remote control. MENU button can also Exit the menu.
To use the menus Accessing the SETUP menu When the set is in the HIGH SECURITY mode, the SETUP menu can be accessed only by the Institutional Set-up key. The Institutional Set-Up Remote Control is available as an Remote Control (RC2573) by pressing the option. When the set is in the STANDARD SECURITY mode, the SETUP menu may be accessed with the standard guest remote control (RC2887) by a sequence of commands (3 1 9 7 5 3 MUTE).
Setup menu items • LANGUAGE: Select the language of the Setup menu. Options are “ENGLISH”, “MELAYU” and “CHINESE” Note: The Chinese Language is for the Guest Menu only. SETUP LANGUAGE COMMUNICATION NO. OF CHANNELS CHANNEL INSTALL SETUP CONFIGURATION ENGLISH > > > > LANGUAGE COMMUNICATION NO. OF CHANNELS CHANNEL INSTALL CONFIGURATION ENGLISH > > > > • COMMUNICATION: Please refer to the section for detail. • NO. OF CHANNELS: This sub menu allows setting the number of TV, PAY-TV, INFO and RADIO channels.
Channel Installation In the CHANNEL INSTALLATION sub-menu, channel settings can be set. CHANNEL INSTALL CHANNEL INPUT SYSTEM FREQUENCY LABEL STORE FINE TUNE MUTE AUTO INSTALL TV PROTECTION TV 1 TUNER AUTO 184.2500 > ( )> > 0 NONE > NO • CHANNEL: The channel type can be selected with the cursor Left/Right key. The available options are: “TV”, “INFO”, “PAY TV” and “RADIO”. Note: Use the numeric keys to enter the program number.
MUTE AUTO INSTALL TV PROTECTION Configuration NONE > NO In the Configuration menu, various settings and features of the TV can be adjusted. CONFIGURATION SWITCH ON/OSD PICTURE/SOUND SECURITY CONTROL FEATURES > > > > > • SWITCH ON/OSD: In this sub-menu the SWITCH ON characteristics and ON SCREEN DISPLAY settings of the TV. • PICTURE/SOUND: In this sub-menu, the PICTURE and SOUND settings of the TV can be set. • SECURITY: In this sub-menu, the SECURITY settings of the TV can be configured.
o STANDBY: TV will be automatically switched to STANDBY mode (even if the last status was ON) whenever the mains power is turned ONON/OSD or resumed after a power interruption. SWITCH o ON: Similar function as “FORCED ON” but the remote control WELCOME MESSAGESTANDBY key > function is enabled when TV is set to this mode. SWITCH ONINDICATOR: CHANNEL AV1display volume indicator when adjusting volume, select “YES”. • VOLUME To SWITCH ON VOLUME 30 Select “NO” to hide the volume indicator.
Control settings In this sub menu, the CONTROL settings of the TV can be configured. CONTROL ESP AUDIO/VIDEO MUTE STEP TUNING DIGIT TIMEOUT MIN VOLUME MAX VOLUME SMARTPOWER OFF NO NO 3.0 0 99 OFF • ESP: Energy Saving Programmability Mode (ESP) function controls the maximum continuous viewing time allowed and its valid values are 00 - 99 (in hours). 00 value means that the ESP function is OFF. Note that if the TV is switched off, the ESP timer countdown will be reset.
Remote control keys Note: Pressing most buttons once will activate the assigned function. Pressing a second time will de-activate it. When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list. The list will be removed automatically after six seconds or press MENU to remove immediately. (9) STANDBY Press to switch the TV to standby mode. (1) Alarm On / Off No function. (9) (2) +Pay TVTo move up or down a Pay TV channel.
Teletext Teletext is an information system broadcast available in certain channels. In some countries, it also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable networks, satellite channels, etc.). Press To switch Teletext ON/OFF.
Picture Formats The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen). 16:9 pictures sometimes have a black band at the top and bottom of the screen (letterbox format). This function allows you to optimize the picture display on screen. Using the different formats, the Picture Format can be set via the Guest Menu or Set-Up Menu. 4:3 The picture is reproduced in 4:3 format and a black band is displayed on either side of the picture.
Wireless Smart Loader The Philips Wireless Smart-Loader 22AV1120/00 and 22AV1135/00 are installation tools especially designed for easy and fast installation of Philips Institutional TV’s. Preparation i Make sure that the 3 R6/AA sized batteries are placed correctly in the battery compartment of the Wireless Smart-Loader. Turn the power switch on at the left side of the product. A green LED at the top casing should light up when pressing any button indicating operational batteries.
> A number display shows from 1~100 the percentage of memory storage progress from the Wireless Smart-Loader to the TV (100 = fully loaded). SMARTLOADER TO TV |||-------- ## > When data transfer is completed, ## is “100”, the following menu appears for 3 seconds: TV READY > > After that, the following menu comes up GOODBYE > > The TV goes to standby now and your TV is installed and ready for start-up and use. Problems and Solutions: Problem Solution The message “WRONG VERSION” is displayed on the screen.
Trouble Shooting Tips Symptoms Items to Check and Actions to follow “Ghost” or double images • This may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may improve the picture. No power • Check that the TV’s AC power cord is plugged into the mains socket. • Unplug the television, wait for 60 seconds. Then re-insert plug into the mains socket and turn on the television again.
Glossary Aspect Ratio The ratio between the width and height of the TV picture on the screen. In a normal TV set the aspect ratio is 4 to 3 (4:3). The new aspect ratio in HDTV is 16:9 which resembles the aspect ratio in a movie theatre (Widescreen). New TV systems support both 4:3 and 16:9 aspect ratio and can automatically switch between them.
Care And Cleaning WARNING concerning stationary images on the TV Screen: Do not leave fixed images on the screen for extended periods of time. This can cause uneven aging of the LCD panel. Normal use of the TV should involve viewing of programs that have constantly moving or changing images. Do not leave moving images on screen for extended periods of time. Do not display the same images too frequently; if you do, subtle “ghost” images can be left on the LCD screen.
Specification - TV ON SCREEN DISPLAY LANGUAGE CONNECTIVITY Bottom Side 32HF7445 ENGLISH, CHINESE, MELAYU AC IN HDMI 1 / HDMI 2 PC IN - Audio input, D-Sub CVI 1 - Component video (YPbPr), Audio L/R input CVI 2 - Component video (YPbPr), Audio L/R input AV - Video input, S-video, Audio L/R input SPDIF output 8Ω Mono Audio out 75Ω /RF Side AV - S-video, Audio L/R input, Video input, Earphone DATA 1 / DATA 2 WEIGHT & DIMENSIONS: Weight (incl. Packaging): Weight (excl.
