Specifications

Mechanical Instructions
EN 13TPT1.1HA LA 4.
4.3.10 Small Signal Board (SSB)
Caution: it is mandatory to remount all different screws at their
original position during re-assembly. Failure to do so may result
in damaging the SSB.
Refer to figures “SSB connector plate” and “SSB removal” for
details.
1. Unplug the LVDS connector [1]. Caution: be careful, as
this is a very fragile connector!
2. Unplug the connectors [2].
3. Remove the screws [3] to release the board from the
connector plate.
4. Remove the screws [4].
5. Carefully lift the SSB at the top and take it out of the set.
Figure 4-12 SSB removal
H_17010_008.eps
180907
2
3 3
3
3
3 3
4
4
4
4
4
4
3 3 3