E Line 321E1/322E1/ 325E1/328E1 www.philips.
Table of Contents 1. Important........................................ 1 1.1 Safety precautions and maintenance................................... 1 1.2 Notational Descriptions.............. 3 1.3 Disposal of product and packing material............................................ 4 2. Setting up the monitor................ 5 2.1 Installation...................................... 5 2.2 Operating the monitor................. 9 2.3 Remove the Base Assembly for VESA Mounting ...........................
1. Important proper cooling of the monitor’s electronics. 1. Important • Do not block the ventilation holes on the cabinet. • When positioning the monitor, make sure the power plug and outlet are easily accessible. • If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation. • 1.1 Safety precautions and maintenance Please use approved power cord provided by Philips all the time.
1. Important • Excessive usage of monitor can cause eye discomfort, it’s better to take shorter breaks more often at your workstation than longer breaks and less often; for example a 5-10 minute break after 50-60-minute continuous screen use is likely to be better than a 15-minute break every two hours. Try to keep your eyes from eye strain while using the screen for a constant period of time by : • Looking at something varying distances after a long period focusing on the screen.
1. Important Service ing” will disappear gradually over a period of time after the power has been switched off. Warning Failure to activate a screen saver, or a periodic screen refresh application may result in severe “burn-in” or “afterimage” or “ghost image” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. • The casing cover should be opened only by qualified service personnel.
1. Important Warning This icon indicates the potential for bodily harm and tells you how to avoid the problem. All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into mono materials. Some warnings may appear in alternate formats and may not be accompanied by an icon. In such cases, the specific presentation of the warning is mandated by the relevant regulatory authority.
2. Setting up the monitor 328E1C: 2. Setting up the monitor E Line 328E1 Quick Start 2.1 Installation Register your product and get support at www.philips.com/welcome Package contents 321E1SC: E Line 321E1 Monitor User’s Manual 使用产品前请阅读使用说明 Contents: User’s Manual Drivers 2019 © 保留备用 y tor Ve rs Vic ion TOP d. Lt Start Power ve d .U n au th o rized ab pli c f ap duplication is a viol ation o a.
2. Setting up the monitor Install base stand the styrofoam, do not squeeze the panel to avoid broken panel. 321E1SC 1. 1 In order to well protect this monitor and avoid scratching or damaging of the monitor, keep the monitor face down in the cushion for the base installation. 2 322E1C/325E1C/328E1C 1. 2. Hold the base stand with both hands and firmly insert the base stand into the base column. (1) Gently attach the base to the base column until the latch locks the base.
2. Setting up the monitor Connecting to your PC curved design, when you pull out the styrofoam, do not squeeze the panel to avoid broken panel. 1 321E1SC 2 2 3 4 1 5 Warning: This product is curve design, when attach / detach the base, place the protective material under the monitor and do not press down the monitor to avoid the damage.
2. Setting up the monitor 325E1C Connect to PC 1. Connect the power cord to the back of the monitor firmly. 2. Turn off your computer and unplug its power cable. 2 4 3 5 1 3. Connect the monitor signal cable to the video connector on the back of your computer. 6 4. Plug the power cord of your computer and your monitor into a nearby outlet. 5. Turn on your computer and monitor. If the monitor displays an image, installation is complete.
2. Setting up the monitor 328E1C 2.2 Operating the monitor Description of the control buttons 321E1SC/322E1C/325E1C 3 7 6 3 7 6 5 4 2 5 4 2 1 Switch monitor’s power ON and OFF. 1 Access the OSD menu. Confirm the OSD adjustment. Switch monitor’s power ON and OFF. Access the OSD menu. Confirm the OSD adjustment. Adjust the OSD menu. Adjust the OSD menu. Change the signal input source. Adjust the Volume. Adjust the brightness level. Return to previous OSD level.
2. Setting up the monitor Description of the On Screen Display The OSD Menu Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor 322E1C/325E1C Sub menu On LowBlue Mode Off 328E1C Main menu Main menu Input Picture LowBlue Mode 1, 2, 3,4 VGA HDMI 1.
2. Setting up the monitor 322E1C/325E1C/328E1C Resolution notification This monitor is designed for optimal performance at its native resolution, 321E1SC/322E1C: 1920x1080@60Hz 325E1C: 1920x1080@60Hz(analog input)&2560x1440@60Hz(digital input) 328E1C: 3840x2160@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 321E1SC/322E1C: 1920x1080 325E1C: 1920x1080(analog input)&2560x1440(digital input) 328E1C: 3840x2160 for best results.
2. Setting up the monitor 3. Remove the hinge cover from monitor body by using your fingers. 2.3 Remove the Base Assembly for VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 321E1SC 1. Place the display face down on a smooth surface. Pay attention not to scratch or damage the screen. 4. Use a screwdriver to remove the screws on the arm,and then detach the arm/stand from the monitor. 2.
2. Setting up the monitor 322E1C/325E1C/328E1C 1. 4. Use a screwdriver to remove the screws on the arm,and then detach the arm/stand from the monitor. Place the display face down on a smooth surface. Pay attention not to scratch or damage the screen. 2. Use screwdriver to loosen the screw located at the bottom of the base,and remove the base from the stand. Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4.
3. Image Optimization 0° 90° -5° * Display design may differ from those illustrated. Warning • To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees. • Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.
3. Image Optimization How to enable SmartImage? 3. Image Optimization 3.1 SmartImage What is it? SmartImage provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time. Whether you're working with text applications, displaying images or watching a video, Philips SmartImage delivers great optimized monitor performance. 321E1SC/322E1C/325E1C 1. Toggle to the left to launch the SmartImage on screen display. 2.
3. Image Optimization • RTS: For playing RTS (Real Time Strategy) games, a user-selected portion can be highlighted for RTS games (through SmartFrame). The picture quality can be adjusted for the highlighted portion. • Gamer 1: User’s preference settings saved as Gamer 1. • Gamer 2: User’s preference settings saved as Gamer 2.
3. Image Optimization • Gamer 2: User’s preference settings saved as Gamer 2. 3.2 SmartContrast • LowBlue Mode: LowBlue Mode for easy on-the-eyes productivity Studies have shown that just as ultra-violet rays can cause eye damage, shortwave length blue light rays from LED displays can cause eye damage and affect vision over time. Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light.
4. Adaptive Sync • AMD Radeon R9 285 • AMD Radeon R7 260X • AMD Radeon R7 260 4. Adaptive Sync ■■ Processor A-Series Desktop and Mobility APUs Adaptive Sync • • • • • • • • • PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image. This is called “tearing.
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type Backlight VA W-LED system Panel Size 31.5” W (80cm) Aspect Ratio 16:9 321E1SC/322E1C: 0.364 x 0.364mm 325E1C: 0.272 x 0.272mm 328E1C: 0.182 x 0.
5.
5. Technical Specifications 321E1SC Power Consumption Normal Operation Sleep (Standby mode) Off mode Heat Dissipation* Normal Operation Sleep (Standby mode) Off mode Power LED indicator Power Supply AC Input AC Input AC Input Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 60Hz 230VAC , 50Hz 36.90 W (typ.) 37.00 W (typ.) 37.10 W (typ.) <0.5 W (typ.) <0.5 W (typ.) <0.5 W (typ.) <0.3 W (typ.) <0.3 W (typ.) <0.3 W (typ.
5. Technical Specifications 325E1C Power Consumption Normal Operation Sleep (Standby mode) Off mode Heat Dissipation* Normal Operation Sleep (Standby mode) Off mode Power LED indicator Power Supply AC Input AC Input AC Input Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 60Hz 230VAC , 50Hz 47.20 W (typ.) 47.30 W (typ.) 47.40 W (typ.) <0.3 W (typ.) <0.3 W (typ.) <0.3 W (typ.) <0.3 W (typ.) <0.3 W (typ.) <0.3 W (typ.
5.
5. Technical Specifications Cabinet Color Finish White/Black Textured Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. SmartUniformity and Delta E information sheets are included in the box.
5. Technical Specifications 321E1SC/322E1C: 5.1 Resolution & Preset Modes H. freq (kHz) Maximum Resolution 321E1SC/322E1C: 1920 x 1080@60Hz (analog input) 1920 x 1080@75Hz (digital input) 325E1C: 1920 x 1080@60Hz (analog input) 2560 x 1440@75Hz (digital input) 328E1C: 3840x2160@60Hz (digital input) Recommended Resolution 321E1SC/322E1C: 1920 x 1080@60Hz (digital input) 325E1C: 1920 x 1080@60Hz (analog input) 2560 x 1440@60Hz (digital input) 328E1C: 3840x2160@60Hz (digital input) 26 Resolution V.
5. Technical Specifications 325E1C: 328E1C: H. freq (kHz) Resolution V. freq (Hz) H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.09 31.47 720 x 400 70.09 31.47 640 x 480 59.94 31.47 640 x 480 59.94 35.00 640 x 480 66.67 35.00 640 x 480 66.67 37.86 640 x 480 72.81 37.86 640 x 480 72.81 37.50 640 x 480 75.00 37.50 640 x 480 75.00 37.88 800 x 600 60.32 37.88 800 x 600 60.32 46.88 800 x 600 75.00 46.88 800 x 600 75.00 48.36 1024 x 768 60.00 48.
6. Power Management 328E1C: 6. Power Management Power Management Definition If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
7. Customer care and warranty together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 7. Customer care and warranty 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
7. Customer care and warranty Three adjacent lit sub pixels (one white pixel). Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables. Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
7.
7. Customer care and warranty 7.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For Warranty Period please refer to Warranty Statement in Regulation & Service Information Manual.
8. Troubleshooting & FAQs 8. Troubleshooting & FAQs • Check to see if the monitor cable has bent pins. • Make sure the computer is turned on. 8.1 Troubleshooting AUTO button doesn't function • This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. The auto function is applicable only in VGA-Analog mode.
8. Troubleshooting & FAQs Main Controls. It is valid only in VGA mode. and cannot be repaired. The damage mentioned above is not covered under your warranty. Horizontal flicker appears Image appears distorted. Text is fuzzy or blurred. • • Adjust the image using the “Auto” function in OSD Main Controls. • Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. It is valid only in VGA mode.
8. Troubleshooting & FAQs 8.2 General FAQs Q2: What is the recommended refresh rate for LCD monitor? Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? Ans.: Recommended resolution for this monitor: 321E1SC/322E1C: 1920x1080@60Hz 325E1C: 1920x1080@60Hz(analog input)&2560x1440@60Hz(digital input) 328E1C: 3840x2160@60Hz. Ans.
8. Troubleshooting & FAQs Q7: How should I clean the LCD surface? Q9: Can I connect my LCD monitor to any PC, workstation or Mac? Ans.: F or normal cleaning, use a clean, soft cloth. For extensive cleaning, please use isopropyl alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone, hexane, etc. Q8: Can I change the color setting of my monitor? Ans.: Yes. All Philips LCD monitors are fully compatible with standard PCs, Macs and workstations.
8. Troubleshooting & FAQs Q12: Why is my Display not showing sharp text, and is displaying jagged characters? Ans.: Y our LCD monitor works best at its native resolution of 321E1SC/322E1C: 1920x1080@60Hz 325E1C: 1920x1080@60Hz(analog input)&2560x1440@60Hz(digital input) 328E1C: 3840x2160@60Hz. For best display, please use this resolution. Q13: How to unlock/lock my hot key? Ans.
2019 © TOP Victory Investments Ltd. All rights reserved. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.
