MSDS

Table Of Contents

MATERIAL SAFETY DATA SHEET Page 1 of 3

PRODUCT: LOW PRESSURE SODIUM LAMPS Revised: 01/06

SOX 18W, 26W, 36W, 66W, 131W

SOX 35W, 55W, 90W, 135W, 180W

--------------------------------------------------------------------------------------------------------

SECTION 1: MANUFACTURER

Manufacturer's Name and Address: Philips Lighting Company

A Division of Philips Electronics

North America Corporation

200 Franklin Square Drive

Somerset, NJ 08875

Emergency Telephone No.: (800) 424-9300 CHEMTREC

(732) 563-3197

Other Information Calls: (800) PLC-BULB

-------------------------------------------------------------------------------------------------------

SECTION 2: HAZARDOUS INGREDIENTS

OSHA (PEL) ACGIH (TLV) % by Wt.

mg/m

Sodium (7440-23-5) No toxicity data for sodium. < .2%

Lead + (7439-92-1) .05mg/m

less than .1mg/m

approx. .025

Inert ingredients 99.8%

(glass, metal)

+ Lead is found within the glass tubing inside the lamp and inside the solder.

--------------------------------------------------------------------------------------------------------

SECTION 3: PHYSICAL DATA

This item is a glass light bulb, chemical characteristics not applicable, For broken lamps,

See Section 7.

A division of

Philips Electronics North America Corporation

200 Franklin Square Drive

P.O. Box 6800

Somerset, NJ 08875-6800

Tel: 732.563.3000

PAGE 1
MATERIAL SAFETY DATA SHEET Page 1 of 3 PRODUCT: LOW PRESSURE SODIUM LAMPS Revised: 01/06 SOX 18W, 26W, 36W, 66W, 131W SOX 35W, 55W, 90W, 135W, 180W -------------------------------------------------------------------------------------------------------SECTION 1: MANUFACTURER Manufacturer's Name and Address: Philips Lighting Company A Division of Philips Electronics North America Corporation 200 Franklin Square Drive Somerset, NJ 08875 Emergency Telephone No.
PAGE 2
LOW PRESSURE SODIUM LAMPS Page 2 of 3 SECTION 4: FIRE AND EXPLOSION DATA FIRE AND EXPLOSION DATA NOT APPLICABLE FOR INTACT LAMP. BROKEN LAMPS CAN PRESENT A DANGER OF SIGNIFICANT HEAT GENERATION IN THE PRESENCE OF SMALL AMOUNTS OF WATER. SEE SECTION 7. ----------------------------------------------------------------------------------------------------------SECTION 5: REACTIVITY Stability: Incompatibility: Lamp is stable. Glass will react with hydrofluoric acid, interior fill will react with water.
PAGE 3
LOW PRESSURE SODIUM LAMPS Page 3 of 3 ----------------------------------------------------------------------------------------------------------SECTION 8: CONTROL MEASURES: Respiratory Protection: None needed during lamp operation. Dust mask and goggles should be used when breaking lamps for disposal. Ventilation: Avoid inhalation of dust when handling broken lamps. Gloves should be worn when breaking lamps to prevent cuts from broken glass.