Manual file:///D|/My%20Documents/dfu/320WN6/english/320wn6/MANUAL.
Safety & Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance • Installation Locations • FAQs • Troubleshooting • Regulatory Information• Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.
Safety & Troubleshooting Consult a service technician if the monitor does not operate normally when the operating instructions given in this manual have been followed. RETURN TO TOP OF THE PAGE Installation Locations ● ● ● ● ● ● Avoid exposure to heat and extreme cold Do not store or use the product in locations exposed to heat, direct sunlight or extreme cold. Avoid moving the product between locations with large temperature differences.
About This Manual About This Manual About This Guide • Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips LCD Monitor TV. It describes the features, setup, operation and other important information. It includes the following sections: ● ● ● ● ● ● ● ● Safety and Troubleshooting Information provides tips and solutions for common problems as well as other related information you may need.
About This Manual Notes, Cautions and Warnings Throughout this guide blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings. They are used as follows: NOTE: This icon indicates important information and tips that help you make better use of your computer system. CAUTION: This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data.
Product Information Product Information Product Features • Lead-free Product • Technical Specifications • Resolution & Preset Modes • Philips Pixel Defect Policy • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views Product Features 320WN6 ● ● ● Less management effort for maximum productivity ❍ Multiple displays form a daisy chain to show uniform ❍ Monitor is network controllable for remote management ❍ Input connectors: CVBS, S-video, SCART, YPbPr, and RF (TV input) Better
Product Information Philips eliminated toxic substances like lead from its displays. Lead-free display helps protect your health and promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment.Philips complies with the European Community stringent RoHS Directive mandating restrictions on hazardous substances in electrical and electronic equipment. With Philips, you can be confident that your display device does not harm the environment.
Product Information • Sync polarities Positive and negative • Input Frequency WXGA Hsync 48 kHz, Vsync 60 Hz (N.I.) SVGA Hsync 38 kHz, Vsync 60 Hz (N.I.) VGA/DVI-D Hsync 31 kHz, Vsync 60 Hz (N.I.
Product Information down button to go to COLOR SETTINGS and press MENU again. Then move the down button to go to NORMAL COLOR and press MENU again. * This data is subject to change without notice. RETURN TO TOP OF THE PAGE Resolution & Preset Modes • Recommended 1360 x 768 at 60Hz 10 factory preset modes: Resolution Mode H. freq (kHz) V. freq (Hz) 640x350 VGA-1 31.469 70.086 640x480 VGA VESA 60 31.469 59.940 640x480 VGA VESA 75 37.500 75.000 720x400 IBM VGA 3H 31.468 70.
Product Information 720x576 576i 15.625 50.000 720x480 480p 31.470 60.000 720x576 576p 31.250 50.000 1280x720 720p 37.500 50.000 1280x720 720p 45.000 60.000 1920x1080 1080i 28.125 50.000 1920x1080 1080i 33.750 60.000 RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use.
Product Information • Dimension (WxHxD) * 1014mm x 517mm x 244mm (incl. Pedestal, Speakers) 794mm x 490mm x 130mm (w/o Pedestal, Speakers) • Weight 19.2 kg (incl. Pedestal, Speakers) • Power supply 100 — 240 VAC, 60 — 50 Hz • Power consumption PC Mode: 100 W (typ.) TV Mode: 130 W (typ.) • Temperature (operating) 5° C to 35° C • Relative humidity 20% to 80% • System MTBF 50K hrs (excluding CCFL 50Khrs) * This data is subject to change without notice.
Product Information 4 No connect 12 No connect 20 No connect 5 No connect 13 No connect 21 No connect 6 DDC Clock 14 +5V Power 22 7 DDC Data 15 Hot Plug Detect 23 T.M.D.S. Clock+ 8 No connect 16 Ground (for +5V) 24 T.M.D.S. Clock- T.M.D.S. Clock Shield 2. The 15-pin D-sub connector (male) of the signal cable: Pin Assignment No. Pin Assignment No.
Product Information Pin No. RS-232 (EIA-232-A) Function 3 Transmit Data (TD) from DTE to DCE 2 Receive Data (RD) from DCE to DTE 7 Request to Send (RTS) 8 Clear to Send (CTS) 6 DCE Ready (DSR) 5 Signal Ground (SG) 1 Received Line Signal Detector (DCD) 4 DTE Ready (DTR) 9 Ring Indicator 4. SCART Connector Pin No. Signal Pin No. 1 Audio right channel output (0.5 Vrms, < 1K ohms) 2 2 Audio right channel input (0.5 Vrms, > 10K ohms) 1 3 Audio left channel output (0.
Product Information 4 Audio ground 4 5 Blue signal ground 5 6 Audio left channel input (0.5 Vrms, > 10K ohms) 3 7 Blue signal I/O (0.7 Vp-p, 75 ohms) 7 8 Function switching I/O (L: < 2V, H: > 10V, 10K ohms) 8 9 Green signal ground 9 10 Intercommunication data line No. 1 10 11 Green signal I/O (0.7 Vp-p, 75 ohms) 11 12 Intercommunication data line No. 2 12 13 Red signal ground 13 14 Blanking signal ground 14 15 Red signal I/O (0.
Product Information Follow the links to see various views of the monitor and its components. Product Description RETURN TO TOP OF THE PAGE file:///D|/My%20Documents/dfu/320WN6/english/320wn6/PRODUCT/PRODUCT.
Installing your LCD Monitor/TV Installing your LCD Monitor/TV Product Description • Connecting to Your PC, TV antenna, DVD/VCR etc. • Getting Started • Optimizing Performance Product Description Installing your LCD Monitor/TV Side View (Left) file:///D|/My%20Documents/dfu/320WN6/english/320wn6/INSTALL/INSTALL.
Installing your LCD Monitor/TV 1 INPUT Increase or decrease the channel number or moving up or down to highlight the function in OSD 2 Increase or decrease the level of audio volume or moving left or right to highlight the sub-menu in the selected function of OSD 3 4 Selecting input source MENU 5 Open the OSD or confirm the selected function DC power switch On/Off RETURN TO TOP OF THE PAGE Side View (Right) file:///D|/My%20Documents/dfu/320WN6/english/320wn6/INSTALL/INSTALL.
Installing your LCD Monitor/TV 1 Audio input for composite input 2 3 4 5 Composite input S-Video input Earphone output TV tuner Audio (left and right) in put for compo site signal in put. Composite (CVBS) signal input S-Video signal input Earphone output TV tuner input (available in TV version only) RETURN TO TOP OF THE PAGE Rear View file:///D|/My%20Documents/dfu/320WN6/english/320wn6/INSTALL/INSTALL.
Installing your LCD Monitor/TV 1 AC in 2 Speakers output 3 D-Sub output 4 DVI-D input 5 D-Sub input 6 RS232 input 7 RS232 output 8 PC audio AC power in External speakers output PC analog D-Sub output PC digital input PC analog D-Sub input RS232 network connection Input RS232 network connection output for the use of loop through function PC stereo audio input file:///D|/My%20Documents/dfu/320WN6/english/320wn6/INSTALL/INSTALL.
Installing your LCD Monitor/TV 9 Audio input for component signal 10 Component input Audio (left and right) input for component signal input Component (YPbPr ) signal input Composite (CVBS) output for the use of loop through function 11 Composite output 12 Audio (left and right) out put for compo site signal Audio output for composite output out put.
On Screen Display On Screen Display On Screen Display Control • Using Your Remote Control On Screen Display Controls An overall view of the On-Screen Display (OSD) structure is shown below. You can use it as a reference for further adjusting your Monitor/TV. There are two different modes of OSD available for different models: ● ● PC Mode TV Mode Main menu There is a slight difference between PC mode and TV mode: Setup selection is available in TV mode only.
On Screen Display PC mode Selection How to use In PC mode ● Smart Picture ● Users can press ❍ Normal ❍ Warm ❍ Cool or to toggle between Press to next sub-menu selection main menu. or Adjust image brightness. ● Press or ● Press or ● Press to return to main menu. Brightness to adjust, to adjacent sub menu selections, Adjust image sharpness. Contrast ● Press or to adjust, ● Press to adjacent sub-menu selections, ● Press to return to main menu.
On Screen Display Automatic fine tuning display geometry and time frequency parameter. ● Press to start, A selection of Store? Yes/No will appear. ● Press ● Press ● Auto Adjust or to toggle between Yes and No. to confirm and return to sub-menu. Adjust display geometry and time frequency parameters. ● ● Manual Adjust ● ● Phase: Press sub-menu. or to adjust, Clock: Phase: Press return to sub-menu. or to adjust, Horizontal: Phase: Press and return to sub-menu.
On Screen Display Adjust image sharpness. It is adjustable only when Smart Picture is in personal mode. Contrast ● Press or to adjust, ● Press or ● Press to return to main menu. to adjacent sub-menu selections, Adjust image color saturation. It is adjustable only when Smart Picture is in personal mode. Color ● Press or to adjust, ● Press or ● Press to return to main menu. to adjacent sub-menu selections, Adjust image sharpness.
On Screen Display TV Mode Preset audio modes. ● Smart Sound ● ● Users can press ❍ Personal ❍ News ❍ Music ❍ Theater Press or to toggle between to next sub-menu selections or to return to main menu. Adjust audio setting parameters. ● Settings ● ● Users can press ❍ Treble ❍ Bass ❍ Balance Press or or or to toggle between to adjacent sub-menu selections to return to main menu. file:///D|/My%20Documents/dfu/320WN6/english/320wn6/OSD/osddesc.
On Screen Display Switch virtual surround effect on or off. ● Virtual Surround Sound ● Users can press ❍ On ❍ Off or to toggle between Press or to adjacent sub-menu selections, return to main menu. to Auto Volume Limit, adjust volume level automatically to prevent sudden peak load exceeds design limit. ● AVL ● Users can press ❍ Yes ❍ No or to toggle between Press or to adjacent sub-menu selections, return to main menu. to to enter sub-menu selections.
On Screen Display PIP Sub-menu PIP window size adjustment. ● Size ● Users can use ❍ Small ❍ Medium ❍ Large ❍ PBP ❍ Off or Press selection. to return to upper level sub-menu, or to toggle between to next Video source of the PIP window. ● Video ● Users can use or ❍ TV ❍ AV (CVBS) ❍ S-video ❍ EXT (Scart) to toggle between Press or to adjacent sub-menu selections, return to upper level sub-menu. to Audio source of the PIP window.
On Screen Display Choices of video source for main screen. ● Source ● Users can use or to toggle between ❍ PC ❍ DVI ❍ HDCP ❍ TV ❍ AV (CVBS) ❍ S-video ❍ EXT (Euro connector, Scart) ❍ HD (YPbPr) Press or to adjacent sub-menu selections, return to upper level sub-menu. to Choices for Zoom function. Zoom ● Users can use menu.
On Screen Display TV mode Choices of video source for main screen. ● Users can use or to toggle between each signal source, to confirm your select. then press ❍ PC ❍ DVI ❍ HDCP ❍ TV ❍ AV (CVBS) ❍ S-Video ❍ Ext (Euro connector, Scart) ❍ HD (YPbPr) Source ● Press or to adjacent sub-menu selections return to upper level sub-menu. Selections of image format.
On Screen Display ❍ ● Super wide Press or to adjacent sub-menu selections return to upper level sub-menu. to Lock up specific channels to prevent underage viewers to watch improper TV content. ● ● Auto Lock ● Users can use to enter next level sub-menu. When you select this function for the first time, a sub-menu will appear and ask you to input access code.You can use number buttons to input a four-digit access code.
On Screen Display Change program lock access code. Users need to set a four digits access code to enable the Auto Lock function. Change code ● Use to enter code input mode Use number buttons to a new four-digit code ● Press ● to confirm and return to upper level sub menu. Clear all of the locked channels. ● Press ❍ Clear all ❍ ● Press Use or to toggle between On Off to confirm and clear up all locked channel settings. to adjacent upper level sub-menu selections. Choices for Zoom function.
On Screen Display ● Install: press Press to confirm and upper level sub-menu. to return to Zoom Type and exit to to enter sub-menu selections. Choices of languages in user interfaces. ● Language Users can use or ❍ ENGLISH ❍ ESPAÑOL to toggle between ❍ ❍ ❍ DEUTSCH ITALIANO ❍ ● Press to adjacent sub-menu selections to main menu. or to return Assigning a three digits monitor ID to the unit, so it can be identified when using RS232 to control from remote.
On Screen Display Turns on or off the light sensor for automatic brightness control. Light Sensor ● ● Users can use ❍ On ❍ Off or Press to adjacent sub-menu selections. or to toggle between Users need to turn off remote control function when they want to use RS232 protocol to control this unit from afar, so it will remote control commands not to conflict with RS232 commands. Remote Control ● ● Users can use ❍ On ❍ Off or Press to adjacent sub-menu selections.
On Screen Display Choose of tuner signal inputs. ● Tuner Mode ● Users can press ❍ Antenna ❍ Cable ❍ Auto Then, press or to toggle between to adjacent sub-menu selections or to return to main menu. Scan all existing channels from your tuner input. Auto Program ● ● Press to start. Press or to adjacent sub-menu selections, return to main menu. to Choices to add or delete channels from available channels. ● ● ● Channel Edit ● ● Press to enter Channel Edit sub-menu.
On Screen Display Movie or TV broadcasters add rating signal in the TV or movie broadcasted.Users can use this function to set up an automatic program rating and blocking mechanism to prevent underage viewers to watch improper movie or TV contents. Rating ● Press ● Press to enter Rating sub-menu. or to adjacent sub-menu selections. Rating sub-menu To enable or disable the TV or Movie block function.
On Screen Display to adjacent sub-menu selections. There are six TV ratings.
On Screen Display S: sexual situation L: strong language D: suggestive dialogue ❍ ❍ ❍ to block all programs in this rating or part of the programs with specific contents. 6) MA: Matured audience only. ● Users can use or to toggle between ❍ Block ❍ V: violence ❍ S: sexual situation ❍ L: strong language ❍ D: suggestive dialogue to block all programs in this rating or part of the programs with specific contents.
On Screen Display There are nine caption modes to be selected. ● Caption Mode ● Users can use ❍ CC1 ❍ CC2 ❍ CC3 ❍ CC4 ❍ TXT1 ❍ TXT2 ❍ TXT3 ❍ TXT4 ❍ CC Mute Then, press or to toggle between to confirm and return to upper level sub-menu. Note: The difference between CC and TXT mode is, CC shows a few lines of dialogues only while TXT (text) use half or entire page to display scrolling text information. CC1 ~CC4 are usually showing same contents in different languages. Text mode likewise.
On Screen Display TV mode (Europe, Asia Pacific models) Scan all existing channels from your tuner input. Auto Program ● ● Press to start. Press or to main menu. to adjacent sub-menu selections, to return Select a frequency with specific channel. Manual Store ● ● Use to enter Manual Store sub-menu, and select between selections. Then, or to to confirm. Choose channel setting to channel edit, channel swap, neme edit, and channel sort.
On Screen Display ● System ● Users can use or to toggle between ❍ France: scans pan Europe and French TV systems ❍ Western Europe: scans pan Europe TV systems only. Press or to adjacent sub-menu selections, confirm and return to upper level sub-menu. to Select a frequency with specific channel. Manual Store ● ● Use to enter, and use Then, press confirm. or or to adjust frequency. to adjacent sub-menu selections, to Give a channel number to the frequency chose in the above function.
On Screen Display Choices to add or delete channels from available channels. ● ● Channel Edit Press enter Channel Edit sub-menu In Channel selection, use you wish to add or delete. or to choose the channel that ● Then, press to next selection, use or to toggle between ❍ Activate (add) ❍ Skip (delete) Repeat the above two steps to add or delete other channels, or, ● Press to confirm and return to upper level sub-menu ● Press or ● to adjacent sub-menu selections.
On Screen Display Modify the channel name from a broadcaster give one to a user preferred one. Name Edit ● Users can use ● Use ● Press ● ● or to select channel. to name input line. Use or alphabet. Press to enter to select from A to Z, or to adjacent to confirm and return to upper level sub-menu. Sort channel name sequence in alphabetical order, from A to Z. Those channels without a name will be placed at the end of the sequence according to their frequencies, from small to large.
Remote Control Remote Control On Screen Display • Using Your Remote Control Using Your Remote Control file:///D|/My%20Documents/dfu/320WN6/english/320wn6/OSD/tv_control.
Remote Control 1 2 3 AV source: ● To select TV/video source in TV and also PIP window. ● If TV is in Standby mode, press this button to switch to ON. Mode: Screen aspect ratio, switching between 4:3, 16: 9, wide screen, and super wide. Numerical keys: ● For direct access to programs. ● If TV is in Standby mode, press any number will switch the TV to ON mode. 4 Previous program: Jump to previous TV channel you are viewing.
Remote Control ● 11 ● Move the cursor right in OSD Adjust volume up 12 Confirm the chosen OSD function 13 Freeze: Freeze the screen in video mode or PIP. 14 Status: Display channel number, video/PC mode, and sound mode information. 15 Sound select: ● To switch between mono and stereo, or to choose between Dual I and Dual II for bilingual transmissions.
Remote Control Teletext Mix: Teletext background become transparent, content mixes with images. 22 Teletext On/Off: Teletext ON or OFF. 23 24 Teletext Hold: Freezes the teletext page. 25 Main Index: Press the button to return to the main index. 26 Teletext Reveal/Conceal: To view the concealed text information (e.g. question/answer, quiz, etc.) send by the teletext provider. Press the button can toggle between conceal and reveal mode.
Customer Care and Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO REVIEW DETAILS OF YOUR WARRANTY COVERAGE WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden • Switzerland • Spain • United Kingdom EASTERN EUROPE: Czech Republic • Hungary • Poland • Russia • Slovakia • Slovenia • Turkey LATIN AMERICA: Antilles • Argentina • Brasil • Chile • Colombia • Mexico • Paraguay •
Download and Print Download and Print Installing your LCD monitor driver • Download and Printing Instructions • Installing FPadjust Program Installing Your LCD monitor driver System requirements: ● ● PC running Windows® 95, Windows® 98, Windows® 2000 , Windows® Me, Windows® XP or later Find your driver ".inf/.icm/.cat" at : /PC/drivers/ Read the "Readme.txt" file before installing. This page provides an option to read the manual in .pdf format.
Download and Print 3. Choose where you would like to save the file; click 'Save' (if prompted to save as either 'text' or 'source', choose 'source'). Printing instructions: To print the manual: 1. With the manual file open, follow your printer's instructions and print the pages you need.
Download and Print Download FP_setup04.exe ● ● ● From the menu that appears, choose 'Save Link As...', 'Save Target As...' or 'Download Link to Disk'. Choose where you would like to save the file; click 'Save' (if prompted to save as either 'text' or 'source', choose 'source'). Exit your browser and install the FPadjust Program. Read the "FP_Readme04.txt" file before installing. RETURN TO TOP OF THE PAGE file:///D|/My%20Documents/dfu/320WN6/english/download/download.
FAQs (Frequently Asked Questions) FAQs (Frequently Asked Questions) Safety and Troubleshooting • General FAQs • Screen Adjustments • Compatibility with Other Peripherals • LCD Panel Technology • Ergonomics, Ecology and Safety Standards • Troubleshooting • Regulatory Information • Other Related Information General FAQs Q: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? A: Recommended video mode for Philips 32": 1360x768 @60Hz. 1.
FAQs (Frequently Asked Questions) Go to your Windows Start menu. Select Settings, then Control Panel. Select Display. Move to Settings and click on the Advanced button. Under Adaptor, change the refresh rate to 56~75. You have 10 minutes to complete the operation; if you do not complete within 10 minutes, power off and re-power on monitor to enter changes. Q: What does 'refresh rate' mean in connection with an LCD monitor? A: The refresh rate is of much less relevance for LCD monitors.
FAQs (Frequently Asked Questions) Q: What is the Auto function? A: The AUTO adjustment key restores the optimal screen position, phase and clock settings at the press of a single button – without the need to navigate through OSD menus and control keys. Note: Auto function is available in selected models only. Q: My Monitor has no power (Power LED does not light up). What should I do? A: Make sure the AC power cord is connected to the Monitor.
FAQs (Frequently Asked Questions) Q: How should I clean the LCD surface? A: For normal cleaning, use a clean, soft cloth. For extensive cleaning, please use isopropyl alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone, hexane, etc. Q: Can the Philips LCD Monitor be mounted on the wall or used as a touch panel? A: Yes. Philips LCD monitors have this optional feature.
FAQs (Frequently Asked Questions) Q: How do LCDs compare to CRTs in terms of radiation? A: Because LCDs do not use an electron gun, they do not generate the same amount of radiation at the screen surface. RETURN TO TOP OF THE PAGE Compatibility with other Peripherals Q: Can I connect my LCD monitor to any PC, workstation or Mac? A: Yes. All Philips LCD monitors are fully compatible with standard PCs, Macs and workstations. You may need a cable adapter to connect the monitor to your Mac system.
FAQs (Frequently Asked Questions) set up to install peripherals. No need to go through the reverse process to unplug a device. Bottom line: USB transforms today's "Plug-and-Pray" into true Plug-and-Play! Please refer to glossary for more information about USB. Q: What is a USB hub ? A: A USB hub provides additional connections to the Universal Serial Bus. A hub's upstream port connects a hub to the host, usually a PC.
FAQs (Frequently Asked Questions) A: Polarization is basically directing light to shine in one direction. Light is electromagnetic waves. Electric and magnetic fields oscillate in a direction perpendicular to the propagation of the light beam. The direction of these fields is called the 'polarization direction'. Normal or non-polarized light has fields in several directions; polarized light has a field in only one direction.
FAQs (Frequently Asked Questions) crystal. When each cell is connected with electrodes and impressed with voltage, the molecular structure of the liquid crystal is altered and controls the amount of inlet lighting to display images. A TFT LCD has several advantages over a CRT, since it can be very thin and no flickering occurs because it does not use the scanning method. Q: Why is vertical frequency of 60Hz optimal for an LCD monitor? A: Unlike a CDT monitor, the TFT LCD panel has a fixed resolution.
FAQs (Frequently Asked Questions) A: Unlike a CRT, an LCD monitor does not have key parts that generate Electro Magnetic Interference, especially magnetic fields. Also, since an LCD display utilizes relatively low power, its power supply is extremely quiet. RETURN TO TOP OF THE PAGE Ergonomics, Ecology and Safety Standards Q: What is the CE mark? A: The CE (Conformité Européenne) mark is required to be displayed on all regulated products offered for sale on the European market.
Troubleshooting Troubleshooting Safety and Troubleshooting • FAQs • Common Problems • TV and Audio Problems • Video Problems • Remote Control Problems • Product Specific Problems • OSD Warning Message • Regulatory Information • Other Related Information This page deals with problems that can be corrected by the user. If the problem still persists after you have tried these solutions, contact your nearest Philips dealer.
Troubleshooting Shaky/Jittery Video Wavy picture or fine movement ● ● ● ● ● Missing Pixels Stuck-on Pixels Brightness Problems LCD screen has spots LCD screen has bright spots Picture too dim or too bright ● ● ● ● ● ● ● Auto adjust image through Menu -> Image Setting -> Auto Adjust Adjust Phase and Clock controls via OSD Perform the LCD Monitor TV factory reset (via Menu -> Factory Reset -> All Settings) Check environmental factors Relocate and test in other room Cycle power on-off These a
Troubleshooting Horizontal/Vertical Lines Screen has one or more lines ● ● ● ● Perform the LCD Monitor TV reset Auto adjust image through Menu -> Image Setting -> Auto Adjust Adjust Phase and Clock controls via OSD Check for bent or broken pins in the video cable connector Note: When operating in DVI mode, the Pixel Clock and Phase adjustments are not available.
Troubleshooting ● Poor TV signal reception Abnormal picture seen from the screen ● No TV picture No picture when TV input was selected ● No sound No sound output when a program with sound was playing ● The proximity of mountains or high buildings may be responsible for ghost pictures, echoing or shadows. In this case, try manually adjusting your pictures: see 'fine tuning' or adjust the direction of the outside aerial.
Troubleshooting ● No sound See video but no audio ● ● ● Check if the LCD Monitor TV volume is turn off of muted. Connect the audio cable securely. Audio cable is connected incorrectly. Verify that the audio source is selected correctly in the OSD. Remote Control Problems Remote control does not work properly No response from the LCD Monitor TV when remote is pressed ● ● ● Point the remote control directly at the remote sensor on the LCD Monitor TV. Replace both batteries with new ones.
Troubleshooting When user sees this warning message, it means that the LCD Monitor TV is in adjustment process. A warning message may appear on the screen indicating that the LCD Monitor TV is out of sync range. See Specifications for the Horizontal and Vertical frequency ranges addressable by this the LCD Monitor TV. Recommended mode is 1360 x 768 @ 60Hz. This message means that there is no video input signal. The LCD Monitor TV is in a power saving mode (in PC mode). The main OSD menu is unlocked.
Troubleshooting RETURN TO TOP OF THE PAGE file:///D|/My%20Documents/dfu/320WN6/english/320wn6/SAFETY/saf_troub.
Regulatory Information Regulatory Information CE Declaration of Conformity • Display Power Management Signaling • Federal Communications Commission (FCC) Notice (U.S.
Regulatory Information - TCO99, TCO03 (Requirement for Environment Labelling of Ergonomics, Energy, Ecology and Emission, TCO: Swedish Confederation of Professional Employees) for TCO versions RETURN TO TOP OF THE PAGE Display Power Management Signaling 320WN6 This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard.
Regulatory Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Regulatory Information Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une installation résidentielle.
Regulatory Information RETURN TO TOP OF THE PAGE VCCI Notice (Japan Only) This is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) for Information technology equipment. If this equipment is used near a radio or television receiver in a domestic environment, it may cause radio Interference. Install and use the equipment according to the instruction manual.
Regulatory Information Please note that this device has been approved for non-business purposes and may be used in any environment, including residential areas. RETURN TO TOP OF THE PAGE Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source.
Regulatory Information RETURN TO TOP OF THE PAGE North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. file:///D|/My%20Documents/dfu/320WN6/english/320wn6/SAFETY/REGS/REGULAT.
Regulatory Information Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ.
Regulatory Information Ergonomie Hinweis (nur Deutschland) Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspricht, ist darauf zu achten, daß 1. Reparaturen nur durch Fachpersonal durchgeführt werden. 2. nur original-Ersatzteile verwendet werden. 3. bei Ersatz der Bildröhre nur eine bauartgleiche eingebaut wird.
Regulatory Information WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A. S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3pin plug fitted in its place.
Regulatory Information 1. The GREEN AND YELLOW wire must be connected to the terminal in the plug which is marked with the letter "E" or by the Earth symbol or coloured GREEN or GREEN AND YELLOW. 2. The BLUE wire must be connected to the terminal which is marked with the letter "N" or coloured BLACK. 3. The BROWN wire must be connected to the terminal which marked with the letter "L" or coloured RED.
Other Related Information Other Related Information Safety and Troubleshooting • FAQs • Troubleshooting • Regulatory Information • Information for Users in the U. S. • Information for Users Outside the U.S Information for Users in the U. S. For units set at 115 V : Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord a maximum of 15-feet long and a parallel blade, grounding type attachment plug rated 15 A, 125 V.
Philips Pixel Defect Policy Philips Pixel Defect Policy Product Features • Technical Specifications • Resolution and Preset Modes • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views Philips' LCD Panel Pixel Defect Policy Philips strives to deliver the highest quality products. We use some of the industry's most advanced manufacturing processes and practise stringent quality control.
Philips Pixel Defect Policy Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. Bright Dot Defects Bright dot defects appear as pixels or sub pixels that are always lit or 'on'. That is, a bright dot is a sub-pixel that stands out on the screen when the monitor displays a dark pattern.
Philips Pixel Defect Policy One dark sub pixel Two or three adjacent dark sub pixels Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects.
Philips Pixel Defect Policy Tiny bright dots less then 50% R/B, 30% G Max 4 * Bright Dot is defined as dots (sub-pixels) which appeared brightly in the screen when the LCM displayed with whole pattern & Bright Dot's brightess is defined over 50% of the brightness against around.
Connecting to Your PC, TV Antenna, DVD/VCR etc. Connecting to Your PC, TV Antenna, DVD/VCR etc. Product Description • Accessory Pack • Connecting to Your PC, TV Antenna, DVD/VCR etc. • Getting Started • Optimizing Performance Accessory Pack Unpack all the parts Power cable Remote control & batteries DVI-D cable VGA signal cable E-DFU pack file:///D|/My%20Documents/dfu/320WN6/english/320wn6/INSTALL/CONNECT.
Connecting to Your PC, TV Antenna, DVD/VCR etc. Base Screw pack 2x10 W Detachable Speakers RETURN TO TOP OF THE PAGE Setting up and connecting your monitor/TV CAUTION: Ensure that the power to the monitor/TV is switched off before the installation. - Connecting the monitor/TV ● Connect the cables to the rear of your monitor/TV according to the numbers: TV model file:///D|/My%20Documents/dfu/320WN6/english/320wn6/INSTALL/CONNECT.
Connecting to Your PC, TV Antenna, DVD/VCR etc. RETURN TO TOP OF THE PAGE - Connect to PC ● ● ● ● Connect the cables to the back of your computer by following step 1~5. If your monitor displays the computer image the installation has been completed successfully. If installation was not successful, see the Troubleshooting section. For installation of the monitor driver for Microsoft Windows®, see the Monitor Driver Installation section (Getting Started).
Connecting to Your PC, TV Antenna, DVD/VCR etc. RETURN TO TOP OF THE PAGE - Connect to DVD/VCD/VCR Connect to DVD/VCR/VCD through S-VIDEO ● Connect to DVD/VCR/VCD through S-VIDEO ● Connect to DVD/VCR /VCD through SCART (for Europe only) file:///D|/My%20Documents/dfu/320WN6/english/320wn6/INSTALL/CONNECT.
Connecting to Your PC, TV Antenna, DVD/VCR etc. ● Connect to DVD/VCR /VCD through composite video (CVBS) ● Connect to DVD/VCR /VCD through component video (YPbPr) file:///D|/My%20Documents/dfu/320WN6/english/320wn6/INSTALL/CONNECT.
Connecting to Your PC, TV Antenna, DVD/VCR etc. RETURN TO TOP OF THE PAGE Connecting to Cable TV Antenna file:///D|/My%20Documents/dfu/320WN6/english/320wn6/INSTALL/CONNECT.
Connecting to Your PC, TV Antenna, DVD/VCR etc. Progressive video and HDTV connections for digital high-definition picture file:///D|/My%20Documents/dfu/320WN6/english/320wn6/INSTALL/CONNECT.
Connecting to Your PC, TV Antenna, DVD/VCR etc. RETURN TO TOP OF THE PAGE file:///D|/My%20Documents/dfu/320WN6/english/320wn6/INSTALL/CONNECT.
Getting Started Getting Started Product Description • Connecting to Your PC, TV Antenna, DVD/VCR etc.• Driver Installation • Optimizing Performance Driver Installation Use the information file ( .inf) for Windows® 95/98/2000/Me/XP or later The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements for Windows® 95/98/2000/Me/XP. This information file ( .
Getting Started For Windows® Me 1. 2. 3. 4. 5. 6. 7. Start Windows® Me Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. Double click on the 'Display' Icon. Select the 'Settings' tab then click on 'Advanced...'. Select 'Monitor' button, then click on 'Change...' button. Select 'Specify the location of the driver(Advanced)' and click on the 'Next' button.
Getting Started 7. 8. 9. 10. 11. 12. 13. 14. - If the 'Properties' button is active, click on 'Properties' button. Please follow the steps below. Click on the 'Driver' tab and then click on 'Update Driver...' button. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button. Click on the 'Have disk...' button, then click on the 'Browse...
Your Philips F1rst Choice Warranty Your Philips F1rst Choice Warranty Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while installing or using this product, please contact the Philips helpdesk directly to benefit from your Philips F1rst Choice Warranty.
Your Philips F1rst Choice Warranty ● ● ● ● ● Damage is caused by accidents including but not limited to lightning, water or fire, misuse or neglect; Reception problems caused by signal conditions or cable or antenna systems outside the unit; Defects caused by abuse or misuse of the monitor; Product requires modification or adaptation to enable it to comply with local or national technical standards, which apply in countries for which the product was not originally designed, manufactured, approved and/or
Your Philips F1rst Choice Warranty Information. Or you can reach us via: Website: http://www.philips.com/support file:///D|/My%20Documents/dfu/320WN6/english/warranty/war_1st.
International Guarantee Your International Guarantee Dear Customer, Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and replacement parts irrespective of the country where it is repaired during a period of 12 months from date of purchase.
United States Guarantee PHILIPS LIMITED WARRANTY One (1) Year Labor and Parts Repair PHILIPS CONSUMER ELECTRONICS warrants this product against defect in material or workmanship, subject to any conditions set forth as follows: PROOF OF PURCHASE: You must have proof of the date of purchase to receive warranted repair on the product. A sales receipt or other document showing the product and the date that your purchased the products as well as the authorized retailer included, is considered such proof.
F1rst Choice Contact Information F1rst Choice Contact Information Country Telephone number Tariff Austria 0820 901115 0.20 Belgium 070 253 010 0.17 Cyprus 800 92256 Free of Charge Denmark 3525 8761 Local call tariff Finland 09 2290 1908 Local call tariff France 08 9165 0006 0.23 Germany 0180 5 007 532 0.12 Greece 00800 3122 1223 Local call tariff Ireland 01 601 1161 Local call tariff Italy 199 404 042 0.
Consumer Information Centers Consumer Information Centers Antilles • Argentina • Australia • Bangladesh • Brasil • Canada • Chile • China • Colombia • Belarus • Bulgaria • Croatia • Czech Republic • Estonia • Dubai • Hong Kong • Hungary • India • Indonesia • Korea • Latvia • Lithuania • Malaysia • Mexico • Morocco • New Zealand • Pakistan • Paraguay • Peru • Philippines • Poland • Romania • Russia • Serbia & Montenegro • Singapore • Slovakia • Slovenia • South Africa • Taiwan • Thailand • Turkey • Ukraine
Consumer Information Centers CROATIA Renoprom d.o.o. Mlinska 5, Strmec HR - 41430 Samobor Tel: +385 1 333 0974 ESTONIA FUJITSU SERVICES OU Akadeemia tee 21G EE-12618 Tallinn Tel: +372 6519900 www.ee.invia.fujitsu.com HUNGARY Serware Szerviz Vizimolnár u. 2-4 HU - 1031 Budapest Tel: +36 1 2426331 Email: inbox@serware.hu www.serware.hu LATVIA ServiceNet LV Jelgavas iela 36 LV - 1055 Riga, Tel: +371 7460399 Email: serviss@servicenet.lv LITHUANIA ServiceNet LT Gaiziunu G.
Consumer Information Centers ROMANIA Blue Ridge Int'l Computers SRL 115, Mihai Eminescu St., Sector 2 RO - 020074 Bucharest Tel: +40 21 2101969 SERBIA & MONTENEGRO Tehnicom Service d.o.o. Bulevar Vojvode Misica 37B YU - 11000 Belgrade Tel: +381 11 3060 886 SLOVAKIA Datalan Servisne Stredisko Puchovska 8 SK - 831 06 Bratislava Tel: +421 2 49207155 Email: servis@datalan.sk SLOVENIA PC HAND Brezovce 10 SI - 1236 Trzin Tel: +386 1 530 08 24 Email: servis@pchand.si POLAND Zolter ul.
Consumer Information Centers TURKEY Türk Philips Ticaret A.S. Yukari Dudullu Org.San.Bolgesi 2.Cadde No:22 34776-Umraniye/Istanbul Tel: (0800)-261 33 02 UKRAINE Comel Shevchenko street 32 UA - 49030 Dnepropetrovsk Tel: +380 562320045 www.csp-comel.com Latin America ANTILLES Philips Antillana N.V. Kaminda A.J.E. Kusters 4 Zeelandia, P.O. box 3523-3051 Willemstad, Curacao Phone: (09)-4612799 Fax : (09)-4612772 ARGENTINA Philips Antillana N.V.
Consumer Information Centers CHILE Philips Chilena S.A. Avenida Santa Maria 0760 P.O. box 2687Santiago de Chile Phone: (02)-730 2000 Fax : (02)-777 6730 COLOMBIA Industrias Philips de Colombia S.A.-Division de Servicio CARRERA 15 Nr. 104-33 Bogota, Colombia Phone:(01)-8000 111001 (toll free) Fax : (01)-619-4300/619-4104 MEXICO Consumer Information Centre Norte 45 No.669 Col. Industrial Vallejo C.P.02300, -Mexico, D.F. Phone: (05)-3687788 / 9180050462 Fax : (05)-7284272 PARAGUAY Av. Rca.
Consumer Information Centers PERU Philips Peruana S.A. Customer Desk Comandante Espinar 719 Casilla 1841 Limab18 Phone: (01)-2136200 Fax : (01)-2136276 URUGUAY Rambla O'Higgins 5303 Montevideo Uruguay Phone: (598) 619 66 66 Fax: (598) 619 77 77 Customer Desk: Phone: 0004054176 VENEZUELA Industrias Venezolanas Philips S.A. Apartado Postal 1167 Caracas 1010-A Phone: (02) 2377575 Fax : (02) 2376420 Canada CANADA Philips Electronics Ltd.
Consumer Information Centers AUSTRALIA Philips Consumer Electronics Consumer Care Center Level 1, 65 Epping Rd North Ryde NSW 2113 Phone: 1300 363 391 Fax : +61 2 9947 0063 NEW ZEALAND Philips New Zealand Ltd. Consumer Help Desk 2 Wagener Place, Mt.Albert P.O. box 1041 Auckland Phone: 0800 477 999 (toll free) Fax : 0800 288 588 Asia BANGLADESH Philips Service Centre 100 Kazi Nazrul Islam Avenue Kawran Bazar C/A Dhaka-1215 Phone: (02)-812909 Fax : (02)-813062 CHINA SHANGHAI Rm 1007, Hongyun Building, No.
Consumer Information Centers HONG KONG Philips Electronics Hong Kong Limited Consumer Service Unit A, 10/F. Park Sun Building 103-107 Wo Yi Hop Road Kwai Chung, N.T. Hong Kong Phone: (852)26199663 Fax: (852)24815847 INDIA Phone: 91-20-712 2048 ext: 2765 Fax: 91-20-712 1558 BOMBAY Philips India Customer Relation Centre Bandbox House 254-D Dr.
Consumer Information Centers INDONESIA Philips Group of Companies in Indonesia Consumer Information Centre Jl.Buncit Raya Kav. 99-100 12510 Jakarta Phone: (021)-7940040 ext: 2100 Fax : (021)-794 7511 / 794 7539 KOREA Philips Korea Ltd. Philips House C.P.O. box 3680 260-199, Itaewon-Dong.
Consumer Information Centers PHILIPPINES PHILIPS ELECTRONICS & LIGHTING, INC. Consumer Electronics 48F PBCOM tower 6795 Ayala Avenue cor VA Rufino St. Salcedo Village 1227 Makati City, PHILS Phone: (02)-888 0572, Domestic Toll Free: 1-800-10-PHILIPS or 1-800-10-744 5477 Fax: (02)-888 0571 SINGAPORE Accord Customer Care Solutions Ltd Authorized Philips Service Center Consumer Service 620A Lorong 1 Toa Rayoh Singapore 319762 Tel: +65 6882 3999 Fax: +65 6250 8037 TAIWAN Philips Taiwan Ltd.
Consumer Information Centers MOROCCO Philips Electronique Maroc 304,BD Mohamed V Casablanca Phone: (02)-302992 Fax : (02)-303446 SOUTH AFRICA PHILIPS SA (PTY) LTD Customer Care Center 195 Main Road Martindale, Johannesburg P.O. box 58088 Newville 2114 Telephone: +27 (0) 11 471 5194 Fax: +27 (0) 11 471 5123 E-mail: phonecare.za@philips.com Middle East DUBAI Philips Middle East B.V. Consumer Information Centre P.O.
